ABB ICSTT-SDS-8100 - En Plantguard Controller Chassis P8100

download ABB ICSTT-SDS-8100 - En Plantguard Controller Chassis P8100

of 2

Transcript of ABB ICSTT-SDS-8100 - En Plantguard Controller Chassis P8100

  • 7/29/2019 ABB ICSTT-SDS-8100 - En Plantguard Controller Chassis P8100

    1/2

    $%%,&6776'6 3/$17*8$5' TMR Controller

    3ODQWJXDUG&RQWUROOHU&KDVVLV3

    Dec 2002

    )52173$1(/

    '(6&5,37,21

    The 3ODQWJXDUGController Chassis is designed to accommodate a maximum of

    eight single-width 3ODQWJXDUG Interfaces and up to two triple-width 3ODQWJXDUG

    TMR Processors.

    The chassis consists of a backplane, power connection terminals, and the Inter-

    Module Bus connectors. The chassis is 6U (10.5ins) high and is either front

    mounted in a 483mm (19-inch) fixed frame or swingframe, or can be panel (rear)

    mounted in a suitable electrical enclosure.

    The two slot positions on the left (as viewed from the front) are for installing the

    3ODQWJXDUG 705 3URFHVVRUV. The eight remaining slots are for installing the

    3ODQWJXDUGInterfaces. Each module plugs into the chassis backplane, connecting to

    the triplicated Inter-Module Bus. Double and single connector options are available.

    The backplane is part of the 3ODQWJXDUG Controller Chassis and provides

    electrical interconnection and other services for the modules. A triplicated 4-

    position DIP switch is provided for user configuration of the system identification..

    Power connection to the 3ODQWJXDUGController Chassis is provided via a 4-pole

    connector on the chassis backplate. The 3ODQWJXDUGController Chassis is designed

    for a nominal dual +24V dc power supply.

    )($785(6

    [PP3ODQWJXDUG705

    3URFHVVRUVORWV

    [PP3ODQWJXDUG,QWHUIDFH

    0RGXOHVORWV

    1RXVHUVHUYLFHDEOHSDUWV

    )DVWDVVHPEO\

    0LQLPXPWRROLQJSDUWV

    8SWRWZHOYH+LJK,QWHJULW\

    ,2PRGXOHVVXSSRUWHGSHU

    3ODQWJXDUG([SDQGHU&KDVVLV

    'XDOUHGXQGDQWSRZHU

    VXSSOLHVIURPWKH3ODQWJXDUG

    +LJK,QWHJULW\3RZHU6XSSO\

    8QLW

    0RGXOHVORWNH\LQJ

    7ULSOLFDWHG,QWHU0RGXOH%XVFRQQHFWLRQV

    )URQWRUUHDUSDQHOPRXQWLQJ

    RQPPLQFK

    GLPHQVLRQV

    DQGZD\',1

    ,2SRUWFRQQHFWRUFDSDELOLW\

  • 7/29/2019 ABB ICSTT-SDS-8100 - En Plantguard Controller Chassis P8100

    2/2

    $%%,&6776'6 3/$17*8$5' TMR Controller

    3ODQWJXDUG&RQWUROOHU&KDVVLV3

    ABBTechnical data sheets are intended forinformation and guidance. ABB has a policy ofcontinual product development andimprovement. Specifications are subject to

    change without notice.

    %$&.3/$1(%/2&.',$*5$0

    (/(&75,&$/63(&,),&$7,21

    3RZHU5HTXLUHPHQWV 20 to 32V dc

    3RZHU'LVVLSDWLRQ None refer to the TMR Processor and associated

    TMR Interface module Data Sheets

    0RGXOH,QWHUIDFH Triple redundant Inter-Module Bus

    0(&+$1,&$/

    63(&,),&$7,21'LPHQVLRQV+[:['266.7mm x 483mm x

    312mm

    (10.5ins x 19ins x 12.28ins)

    :HLJKW5kg

    (11lbs.

    (19,520(17$/

    2SHUDWLQJ7HPSHUDWXUH

    -5C to 60C

    (23F to 140F)

    2SHUDWLQJ+XPLGLW\5 to 95%, non-condensing

    9LEUDWLRQ

    10 to 57Hz 0.075mm

    57 to 500Hz 1.0g

    6KRFN15g, sine wave, 11ms

    (0,,(&ESD

    Air discharge to 15kV

    Contact discharge to 8kV

    Radiated Fields

    10V/m, 27MHz to

    500MHz

    Transients and Bursts

    2kV, 2.5kHz for

    t=60 seconds