A pragmatic perspective on lithium ion batteries
-
Upload
bing-hsieh -
Category
Technology
-
view
1.335 -
download
0
Transcript of A pragmatic perspective on lithium ion batteries
![Page 1: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/1.jpg)
A Pragmatic Perspective on Lithium Ion Batteries (LIBs)從實用的觀點評估鋰電池研究近期的契機
Bing HsiehNovember, 2015
![Page 2: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/2.jpg)
$100B energy storage industry• Key Players: Japan, China, Korea, and US
Does Taiwan want to become a “key” player?
•In 2014, global lithium battery anode materials output totaled around 70,000 tons, concentrated in China and Japan, which together constituted over 95% of global anode materials sales volume.
•Global anode materials industry is highly concentrated, with major manufacturers including Hitachi Chemical, JFE Chemical, Mitsubishi Chemical, BTR, and Ningbo Shanshan, which held a combined market share of over 80% in 2014.
- Hitachi & Ningbo Shanshan: artificial graphite- BTR & Mitsubishi : natural graphite- JFE Chemical & Ningbo Shanshan in MCMB
(MesoCarbon MicroBeads)
![Page 3: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/3.jpg)
Startups in the Bay AreaFounder University Focus
Amprius Yi Cui Stanford Si Anode
Imprint Energy James Evans UC Berkeley ZincPoly
Seeo (acquiredBy Bosch 博世 )
Nitash Balsara UC Berkeley Polymer Electrolytes
BlueCurrent Nitash Balsara UC Berkeley Oligomer Electrolytes
Saktis3 Ann Marie Sastry U Michigan Solid State LIBs
Cambrios Angela Belcher MIT Ag NanowiresTransparent conductor
C3Nano Zhenan Bao Stanford CNT transparent Conductor
Carbon3D Joe Desimone U N Carolina 3D printing (business product)
Ubiquitous Energy
Vladimir Bulović MIT Transparent Solar Cells
Does it make sense for Taiwan to invest more in energy storage technologies?
If yes, Why & How?
![Page 4: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/4.jpg)
Cost of LIBs
DOE cost target of
$150/kWh in ~2030
Nissan LeafBattery Pack@ $270/kWh
In 2014
![Page 5: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/5.jpg)
Li+ & e- flow in LIBs
• Li+ & e- flow in the same direction.• During charging Li+/e- flow from v+ to v-.• During discharging from v- to v+ electrode.
(Cu)(Al)
• Al (d=2.7); Cu (d=9.0)• Al: light weight; but can alloy with Li• Surface Al2O3 gives impedance. (3M has carbon coated oxide-free Al )• Energy density α Electrode thickness• High Battery Cost: $1000/kwh
![Page 6: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/6.jpg)
Micrographs of Electrode Particles
LiCoO2
LiCoO2
LiCoO2
LiNiO2
LiNiO2
KS4 Graphite Si NP LiFePO4 Hollow flakes
LiFePO4 Particles
LiFePO4 NW
LiFePO4 Rods
LiFePO4 Flakes
NonPorous particles!
![Page 7: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/7.jpg)
Various Form Factors of LIBs
![Page 8: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/8.jpg)
Thin or thick electrode?
Seeo IncSolidEnergy System
US 2014/0170524 1-28. (canceled)29. An electrochemical cell, comprising: an anode;a semi-solid cathode including a suspension of about 40% to about 75% by volume of an active material and about 1% to about 6% by volume of a conductive material in a non-aqueous liquid electrolyte; andan ion-permeable membrane disposed between the anode and the semi-solid cathode,wherein, the semi-solid cathode has a thickness in the range of about 250 μm to about 2,000 μm, and wherein the electrochemical cell has an area specific capacity of at least 7 mAh/cm2 at a C-rate of C/4.
![Page 9: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/9.jpg)
![Page 10: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/10.jpg)
+-
Cu AlC
SepE
![Page 11: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/11.jpg)
Key Areas & Issues in LIBs• High Voltage and High Capacity Cathodes –
- No stable and no electrolytes could be used. - Electrode coating has potential. - 3M, Umicore, BASF, Argonne, Hydro Quebec- S (1670mAh/g); O2 (>3300 mAh/g, light oxygen)
• High Capacity Anodes –-Li (3860 mAh/g) or Si (4200 mAh/g); - Li dendrite formation vs. Si pulverization. - Electrode coating has shown potential. - Li over Si, because Si anode may not work out. - Li: SolidEnergy, Seeo. Si: Amprius and various big companies
• High Voltage Electrolytes- May not be practical, - additives work may bare fruits; but can only be used for final optimization
• Polymer Electrolytes - Safer, could suppress dendrite formation and enable the use of Li metal; but need to operate at 50-90oC.- Could reduce the overall cost of LIBs and enable Li-S and Li-Air technologies.- May be used as separators, binders for electrodes, especially for Si anode – An value add.
![Page 12: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/12.jpg)
Three Types of Cathode Materials
![Page 13: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/13.jpg)
John Goodenough,
Not enough for Goodenough, The man who brought us the lithium-ion battery at the age of 57
has an idea for a new one at 92
http://qz.com/338767/the-man-who-brought-us-the-lithium-ion-battery-at-57-has-an-idea-for-a-new-one-at-92/
“I want to solve the problem before I throw my chips in. I’m only 92. I still have time to go.”—John Goodenough Feb 2015
![Page 14: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/14.jpg)
Major Strategies to Improve LIB Materials
B or N doped grapheneGraphene-PNNi compositenanoparticles
![Page 15: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/15.jpg)
List of Important Cathode Materials voltage specific
capacity (mAh/g)
energy density (wh/kg)
Conductivity
Density (g/cm3) [Tapped]
Surface area
(m2/g)
Cost ($/kg)
LiFePO4 (Fiscar) LFP O 3.4 100-160
(170)578 E-8 0.23
LiFe1/2
Mn1/2
PO4
O 3.4-4.1 160 (170)
LiMnPO4
O 4.1 171 701 E-10 LiCoPO4 O 4.8 167 802 LiNiPO4 O 5.1 167 852
LiCoO2 (toxic) (Tesla) LCO L 3.7 120-155
(274 ) 570 E-4 25
LiMnO2 L LiNiO2 (toxic) L 135-180
(274) 13
Li(Ni16/20Co3/20Al1/20)O2 NCA L 3.8 (3-4.2)
180-200 (??)
680-760 4.45 0.5
Li(Ni1/3
Mn1/3
Co1/3
)O2
Nissan & GMNMC111
BC618L 4.2-4.6 130-150
(272)597 4.8
[2.69] 0.26
Li(Ni1/2Mn3/10Co2/10)O2 1/5LiCoO2*4/5(LiMn3/8Ni2/8)O2
NMC532 ?? (164)
635
Li(Ni2/5Mn2/5Co1/5)O2 1/5LiCoO2*4/5(LiMn1/2Ni1/2)O2
NMC442 BC718
?? (155)
4.7 [2.29]
0.39
Li(Ni3/5Mn1/5Co1/5)O2 1/5LiCoO2*2/5(LiMn1/2Ni1/2)O2
NMC622
Li(Ni4/5Mn1/10Co1/10)O2 1/10LiCoO2*4/5(LiMn1/2Ni1/2)O2
NMC811
Lithium Rich Layer Oxide Li(Li1/3Mn2/3)O2*Li(Mn3/8Ni3/8Co1/4)O2 = Li(Li, Mn, Ni, Co)O2
HE-NMC (HE-NCM)
L 4.65 (5.1)
??? (250)
986
LiMn2O4 LMO S 4.3 (3.5-4.3)
100-130 (148)
500 (585)
E-4 4.29 0.5 0.5
LiMn3/2
Ni1/2
O4
(Nissan, GM)LMNO HV-spinel
S 4.7 120 (148)
651 4.45 1.3
![Page 16: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/16.jpg)
Energy Diagrams of LIBs
Vacuum level
Li = 2.9 eV 7 eV
Coatings on cathode particles & Li metals can be viewed as preformedSEI layers. Working on preformed SEI layersIs more practical than trying to developElectrolytes with higher oxidation potentials.
![Page 17: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/17.jpg)
Coatings on Cathodes Particles- Preformed SEI Layers
• Carbon coatings: Amorphous C, Graphene, C-PANI composites • Metal oxide coatings – Al2O3, SiO2, TiO2, ZrO2, MgO• Metal fluoride – AlF3, LaF3
• FePO4 and FePO4-PANI• Hybrid coatings of carbon – C+Li3PO4;
![Page 18: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/18.jpg)
Dendrite Formation in LIBs•“Good” SEI formation allows Li+ to diffuse in and out of the anode.
•“Bad” SEI does not allow the flow of Li+ in and out of the anode due to both thickness issues as well as a different chemical makeup compared to good SEI. Dendritic growth of metallic Li shorts the battery after reaching the cathode.
![Page 19: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/19.jpg)
Dendrite Suppressing Methods
• Electrolyte additives: Alkali salts (Cs+), high LiTFSI concentrations.
• Coatings on Li metal: Carbon coating• Thermal conductor coatings on separator: BN • Ionic liquids as eletrolytes.• Polymer electrolytes: block polymers, crosslinked polymers.• Pulse charging• Others
![Page 20: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/20.jpg)
Dendrite Formation in Li ion/Li metal Batteries Yi Cui, Stanford
![Page 21: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/21.jpg)
Mechanism of Dendrite Formation in Li ion/Li metal Batteries
This seemingly elegant method for suppressing The growth of Li dendrite was not patented.
![Page 22: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/22.jpg)
Self-Healing Electrostatic Shield (SHES) Mechanism
•SEI layer will form once Li metal contact liquid electrolyte.
•Li ions can diffuse through SEI layer and deposit on Li surface
•SHES additives (such as Cs ions) will stay outside of SEI layer
•Formation and stability of SEI layer are the main factors affecting the Coulombic efficiency of Li deposition/stripping processes.
![Page 23: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/23.jpg)
CsPF6 prevents dendrite formation
Coulombic efficiency is still low.
![Page 24: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/24.jpg)
Block Copolymers as Solid ElectrolytesSeeo Inc.
PATTERNS APLENTYThese TEM images show various morphologies of polystyrene-poly(ethylene oxide) copolymers, doped with salts, that can be used in advanced batteries. Understanding the factors that control polymer structure and ionic conductivity is key to exploiting these materials.
PS = red, black; PEO = green, white; salt = blue. Credit: Nitash Balsara, UC Berkeley (Founder of Seeo Inc)
![Page 25: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/25.jpg)
Mechanism of Dendrite Formation in Li metal Batteries
Synchrotron hard X-ray microtomography experiments on symmetric lithium–polymer–lithium cells cycled at 90 °C
Credit: Nitash Balsara, UC Berkeley
![Page 26: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/26.jpg)
Block Copolymers as Solid Electrolytes (Seeo Inc)
Mw = 100K or 200K
50% triblockNo homopolymers
•Anionic polymers can be easily isolated in high purity•ATRP polymers have ionic and homopolymer impurities and weak ester groups.•Nitroxide Mediated Polymerization (NMP) has become the method of choice.•Too expensive.
s-BuLi EO(CH2CH2O)(CH2 CH)
PEG OHHO
BrO
BrPEG OO
O
Br
O
Br CuCl2Me6TREN
(CH2CH2O)(CH2 CH) (CH2 CH)
s-BuLi EO
Br Br(CH2CH2O)(CH2 CH) (CH2 CH)
<50% triblock
![Page 27: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/27.jpg)
Block/Comb Polysiloxanes as ElectrolytesPolysiloxane chain has very low Tg of -123oC
D3V(CH2 CH) (Si
CH3O)
s-BuLiSi O SiH CH2CH2R1-3 (CH2 CH) (Si
CH3O)
Si O Si CH2CH2RPt cat
Si O SiH HR
RhSi O SiH CH2CH2R
•A powerful modular synthesis of functional block copolymers.•Achieved quantitative grafting for many pendant groups.•Wide range of oligoEO groups have been incorporated into R .•Highest conductivity achieved is 1x10-4 S/cm (n = 4 is sufficient), giving an operation temperature of ~50oC.•Amphiphilic polysiloxanes remain an attractive but barely explored solid electrolyte materials.•Too expansive.
(SiCH3
HO) (Si
CH3O)
R
R(SiCH3
O) (SiCH3
O)
Si O Si CH2CH2R
R = -(CH2CH2O)n-CH3 n = 3-6
![Page 28: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/28.jpg)
Ionic Liquids as Conductivity Enhancing Additives
N
NR1
R1
R3+
CF3-SO2-N--SO2CF3
X- N+ X-
B-O
O
O
O
-Commercial materials not stable and did not give much improvement on conductivity.-Chemistry is straight forward, but purification was more involved.-One of the ionic liquid gave 10X improvement of conductivity of a polysiloxane electrolyte to 7 x 10-4 S/cm (4EO)
X- =
![Page 29: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/29.jpg)
Si Anodes
• Yi Cui has a monopoly in this area. See https://www.youtube.com/watch?v=0Z7cEWrX9U4
• Pomegranate Si micron particles• Reduced Silica• New polymer biners • Others
![Page 30: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/30.jpg)
Si Anodes Yi Cui -Stanford
![Page 31: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/31.jpg)
Si Anodes Yi Cui -Stanford
![Page 32: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/32.jpg)
Si NP from Reduced Silica
high reversible capacity of 3105 mAh g21. In particular, reversible Li storage capacities above 1500 mAh/g were maintained after 500 cycles at a high rate of C/2.
![Page 33: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/33.jpg)
Conjugated Polymers as Binders for Si AnodeGao Liu -LBNL
peel strength
Electrode swelling
Cycling Performance
RatePerformance
![Page 34: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/34.jpg)
Non-conjugated Polymers as Binders for Si AnodeGao Liu -LBNL
After 500 cycles After only 40 cycles
•Lower cost materials.•Work better than conjugated polymers PVDFPoly(pyrene)
![Page 35: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/35.jpg)
Key Issues & Interests in LIBs• High Voltage and High Capacity Cathodes –
- No stable and no electrolytes could be used. - Electrode coating has potential. - 3M, Umicore, BASF, Argonne, Hydro Quebec- S (1670mAh/g); O2 (>3300 mAh/g, light oxygen)
• High Capacity Anodes –-Li (3860 mAh/g) or Si (4200 mAh/g); - Li dendrite formation vs. Si pulverization. - Electrode coating has shown potential. - Li over Si, because Si anode may not work out. - Li: SolidEnergy, Seeo. Si: Amprius and various big companies
• High Voltage Electrolytes- May not be practical, - additives work may bare fruits; but can only be used for final optimization
• Polymer Electrolytes - Safer, could suppress dendrite formation and enable the use of Li metal; but need to operate at 50-90oC.- Could reduce the overall cost of LIBs and enable Li-S and Li-Air technologies.- May be used as separators, binders for electrodes, especially for Si anode – An value add.
![Page 36: A pragmatic perspective on lithium ion batteries](https://reader036.fdocument.pub/reader036/viewer/2022062522/589ab8c61a28abff4f8b64b3/html5/thumbnails/36.jpg)
Summary
Solid polymer batteries with thin lithium metal anode is one of the best paths forward