VENTANAS DE PVC · ventanas de pvc. 2. 3 ventana corredera vertical ventanas de pvc ...
90degree FR PVC
1
Technical Data Sheet Client Paradise Product specification ZH-90 / 90℃FR PVC Property Unit Standard Range Test Value 1 Operating Temperature ℃ 90 90 2 Shore Hardness A A － - 3 Density g/cm 3 ≤1.45 1.420 4 Tensile Strength before ageing MPa ≥16.0 18.5 5 Elongation at break before ageing % ≥180 273 6 Ageing conditions 100±2℃，240h 7 Retention of tensile strength after ageing % ±20 8 8 Retention of elongation after ageing % ±20 －9 9 Thermal mass loss g/m 2 ≤15 9 10 Volume resistivity on 20℃ Ω·m ≥1×10 9 7.6×10 10 11 Cold Shock on -20℃ --- 15/30 0/30 12 Oxygen Index % ≥32 32.2 13 14 Environmenta l Requirement - Remark Hereinbefore tests and the using apparatus are in accordance with GB/T 8815. Reference for processing Using 90 machines; if allowed to dry in use, dry conditions80℃，2h Upper limit of material processing：190℃ Temp section 1 zone 2 zone 3 zone 4 zone 5 zone 6 zone 7 zone Process temp/℃ 150±5 160±5 165±5 170±5 165±5 163±5 160±5 浙浙浙浙浙浙浙浙浙浙浙浙浙 浙浙浙浙浙浙浙浙浙浙浙浙浙浙浙 63 浙 浙 ，：311305 浙浙 ： http://www.wanma-mm.cn 浙浙 ： 0571-63755221 浙 传 ： 0571-63752015 E-mail: [email protected]
-
Upload
mohammad-ali -
Category
Documents
-
view
9 -
download
3
description
90degree FR PVC
Transcript of 90degree FR PVC
Technical Data SheetClient Paradise Product specification ZH-90 / 90℃FR PVC
Property Unit Standard Range Test Value
1 Operating Temperature ℃ 90 90
2 Shore Hardness A A － -
3 Density g/cm3 ≤1.45 1.420
4 Tensile Strength before ageing MPa ≥16.0 18.5
5 Elongation at break before ageing % ≥180 273
6 Ageing conditions 100±2℃，240h
7 Retention of tensile strength after ageing
% ±20 8
8 Retention of elongation after ageing % ±20 －9
9 Thermal mass loss g/m2 ≤15 9
10 Volume resistivity on 20℃ Ω·m ≥1×109 7.6×1010
11 Cold Shock on -20℃ --- 15/30 0/30
12 Oxygen Index % ≥32 32.2
13
14
Environmental Requirement
-
Remark Hereinbefore tests and the using apparatus are in accordance with GB/T 8815.
Reference for processing
Using 90 machines; if allowed to dry in use, dry conditions80℃，2hUpper limit of material processing：190℃Temp section 1 zone 2 zone 3 zone 4 zone 5 zone 6 zone 7 zone
Process temp/℃ 150±5 160±5 165±5 170±5 165±5 163±5 160±5
浙江万马高分子材料有限公司中国浙江省临安经济开发区南环路 63号，邮编：311305 网址：http://www.wanma-mm.cn电话：0571-63755221 传真：0571-63752015 E-mail: [email protected]
