1. 1. The Soil Environmental Protection and Ecological Compliance Green Material SC-01-1 SC-01-1 Inorganic Ionic Curing Agent Soil Concrete Technical Information CROWNSWEAR ENTERPRISE CORPORATION
2. 2. Soil Concrete SC-01-1 Product Introduction SC-01-1 SC-01-1 SC-01-1 Inorganic Ionic Stability Liquid Curing Agent is consisting of alkali metal aqueous solution and various elements with strong positive ion in the form of inorganic compound liquid solidify agent. When mix it with substance such as sludge and cement, the negative ion of substance will create electrostatic attraction between the oppositely charged ions causes them to come together and form a bond. In principle, it is a bond that formed by the attraction between two oppositely charged ions ion (Hydrogen ions and Metal ions) in order to strengthen sorptivity, promote coagulation and accelerate solidification of substance.
3. 3. Applicable Material SC-01-1 It is applicable for high moisture clay, mud, sludge, soil and waste from sedimentary pond, municipal sewage, wastewater treatment system and construction site. After mixing SC-01-1 with substance, the element of substance will be solidifying within the substance, avoid the secondary pollution and substance reverts. Structure 2-3 The structure is non- toxic and general solid after mixing with substance with good property in water resistance and anti-acid. Rain, temperature and UV resistance. Durability is 2-3 times than asphalt. Natural colors, to maintain coordination with nature ecological and landscape.
4. 4. Main Benefit SC-01-1 3R (//) SC-01-1 is truly Environmental Friendly 3R Products (Reduce/Reuse/Recycle) with main benefit as below: 1 . 2 . 3 . 4 . 5 . 6 . 7 . 8 . 9 . 1. Reduce Number of waste. 2. Reduce Cost of waste disposal and management. 3. Reduce Handling time of waste disposal and management. 4. Reduce raw material cost for landscaping , construction, concrete and pavement products. 5. Reduce environmental impact and pollution. 6. Reduce of using natural material for better environmental protection. 7. Reuse the waste as functional material for various products. 8. Recycle the waste for ecological system improvement. 9. Recycle the waste to avoid the secondary pollution.
5. 5. Main Application Sludge and Waste Solidification SC-01-1 After mixing SC-01-1 with for high moisture clay, mud, sludge, soil and waste from sedimentary pond, municipal sewage, wastewater treatment system and construction site, the substance will be solidify in short period of time. After solidification, it will be a dry and solid material for main application as below: 1. ., 2. 3. () 4. () 5. 6. 1. High moisture content waste dispose such as sludge and prevent revert in any circumstance. 2. Retaining walls and ditches the Revetment materials, etc. 3. Aggregate for Roadbed and Construction site. 4. Mixing material for construction products such as concrete block and Portland cement. And can landscaping product. 5. People's Bank of health walks, bike lanes, park plaza, leisure farms, playgrounds, parking lots. 6. Soil Improvement.
6. 6. Soil Concrete Compressive strength Application (kg/cm2) Standard Requirements Compressive strength (kg/cm2) (kg/cm2) Soil Concrete Compressive strength (kg/cm2) Temporary construction roads 2.0(kg/cm2) >>5(kg/cm2) Slope Block 100 >100 Embankment 30 >30 SC-01-1 : When SC-01-1 mixed with cement, the ratio between dosages and dilute is based on usage and purpose as example below. Remark: 1.SC-01-1 SC-01-1 curing liquid dosage and soil properties determines the compressive strength. 2. Different purposes for different intensity ratios.
7. 7. Construction Guideline: SC-01-1 Construction Overview 1. 2.() SC-01-1 3. 4. 5. 1.Material from construction site dirt, gravel, waste soil, sludge, and etc. After breaking and filtering can be used. 2.Put into crusher (crush and loose) then put into the mixer to mix SC-01 with the cement evenly. 3.Construction pavement perfusion, bulldozed and compaction. The roadbed underlying must have good compaction. Wetting the surface with sprinkler, no need steel mesh, the materia l will integrate closely. 4.Equipment is easy to obtain, it including excavators, crushers, mixers and etc. Slightly different from traditional equipment. The company can offer exclusive broken and mixers and other equipment. 5.No restriction on construction site and terrain. Packaging and preservation: SC-01-1 Soil Concrete SC-01-1 is Non-toxic inorganic liquid, it packaged in plastic buckets in order to facilitate transport , storage and preservation indefinitely.
8. 8. SC-01-1Project Reference China Guangdong Zhujiang River Sludge Treatment Remark: 7 47.5kg/cm2 (4.75Mpa) 7 days average compressive strength of a material: 47.5kg/cm2 (4.75Mpa) 28 82.6kg/cm2 (8.26Mpa) 28 days average compressive strength of a material: 82.6kg/cm2 (8.26Mpa) After Mixing 7 Days 28 Days
9. 9. Vietnam Mekong River Sludge for Concrete Block Mekong River waste Soil Management Test Test Piece of Formed Item Waste Soil 20% Mixing with Cement 20% Filling the waste Soil to case Test case Result Next day Facility of test
10. 10. Taiwan Yilan Park Way Before After
11. 11. Attached File Taiwan and Vietnam Mekong River Test Report
12. 12. SC-01-1 CROWNSWEAR the Soil Concrete SC-01-1 is your best choice Taiwan Head office - Crownswear Enterprise Corporation 7262 2FL. NO.726. WEN LIN ROAD.TAIPEI,TAIWAN,R.O.C Tel886-2-2832-1916 Fax886-2-2832-1917 E-mail:crownmp@ms29.hinet.net http://www.crownswear.com Crownswear Nanjing Manufacturing Plant - Crownswear Enterprise Corporation Nanjing 8 NO.8,Tianma Rd., Maqun Science Park, Nanjing 210049,China. PROC. Tel86-25-84358698 Fax86-25-84365586 Crownswear Vietnam - Crownswear Enterprise Corporation Vietnam 2145 5 Floor, No.214 Hoang Hoa Tham, Ward 12, Tan Binh District, HCM City, Vietnam Tel84-8-66855110 Fax84-8-62937939