3 Measures to Fix ScanPST Error "An unexpected error prevented access to this file"
-
Upload
datanumen-inc -
Category
Software
-
view
50 -
download
0
Transcript of 3 Measures to Fix ScanPST Error "An unexpected error prevented access to this file"
www.datanumen.com/outlook-repair/
Measures to Fix ScanPSTError “An unexpected error
prevented access to this file”
www.datanumen.com/outlook-repair/
•Once, when I attempted to copy the Outlook data file to another drive, the process failed and popped up a CRC error.•Like my usual choice, I renamed the PST file
and accessed ScanPST to fix it.•However, the result was not satisfactory, I
received error again in this repair tool.
www.datanumen.com/outlook-repair/
• In this time the ScanPST error mentions “An unexpected error prevented access to this file. Use ScanDisk to check the disk for errors, and then try using the Inbox Repair tool again”.•Now, let’s see how I settle down the issue
ultimately.
www.datanumen.com/outlook-repair/
What Caused this ScanPST Error
• In general, this ScanPST error could be caused by many factors such as CRC error, hard drive fragmentation and so on.•But ScanPST could only solve errors related to
the PST file other than the disk and sometimes even fails in tough PST corruption.
www.datanumen.com/outlook-repair/
Ways to Fix this ScanPST Error
•On the basis of the error’s suggestion, you can firstly scan the disk to have a try.•Now, you can choose following 2 methods to
finish this step.1. Launch Check Disk in Drive Propertiesa) To start with, go to “Start Menu”, click
“Computer”.
www.datanumen.com/outlook-repair/
b) Next in the new interface, locate the hard drive where your Outlook is installed. And right click the drive and select “Properties”.
www.datanumen.com/outlook-repair/
c) Then a new dialog box will show up. Switch to “Tools” tab. Find and click the “Check now” button.
www.datanumen.com/outlook-repair/
d) Later, enable the two check disk options in the new window.
e) At last, click the “Start” button to begin the checking process.
www.datanumen.com/outlook-repair/
2. Run ScanDisk in Command Prompt
a) At first, go to “Start Menu” and search “cmd”.b) Next right click the “cmd” program and select
“Run as Administrator”.
www.datanumen.com/outlook-repair/
c) Then in the new Command Prompt, enter “chkdsk: <drivename >/f” and press the “Enter” key button.
d) Finally just follow its onscreen instructions to initiate the scanning process.
www.datanumen.com/outlook-repair/
Process ScanPST Again
•After the disk check process, you can attempt a recovery by ScanPST again.• If it can work in a normal manner, then the
problem is solved.•Otherwise, it means that you probably meet
up with badly compromised PST files and the in-built tool cannot help.
www.datanumen.com/outlook-repair/
Turn to Third Party Tools
• Since that there‘s nothing that ScanPST can do to help, you should find a dependable repair tool as soon as possible to retrieve the data rapidly.•DataNumen Outlook Repair is such a tool
here to recommend, it has a good reputation in the market and outstanding recovery capability of its peers.
www.datanumen.com/outlook-repair/
Thank you !!!!