2015 Company Profile
-
Upload
mohammed-abugoukh -
Category
Documents
-
view
54 -
download
1
Transcript of 2015 Company Profile
للل ااا شركة هام اليك تروميكانيكشركة هام اليك تروميكانيكشركة هام اليك تروميكانيك
HHHAAAMMM EEEllleeeccctttrrrooo---MMMeeeccchhhaaannniiicccaaalll CCCooo... LLLtttddd
CCCOOOMMMPPPAAANNNYYY PPPRRROOOFFFIIILLLEEE
222
Table of content
3 FACTS & FIGURE
4 ABOUT US
5 BOARD OF DIRECTORS
6 CORPORATE STRATEGY
7 OUR VISIONS, MISSIONS & VALUES
9 TESTIMONIALS FROM CUSTOMERS
11 SERVICES & PRODUCTS
12 SOFTWARE
28 ELECTRICAL WORKS
29 MECHANICAL WORKS
30 PIPING WORKS
31 OTHER SERVICES
32 PROJECT & JOBS
40 OTHER JOBS
41 DESIGN WORKS
42 HSE POLICY
43 QUALITY ASSURANCE POLICY
44 COMPANY C.V
44 ORGANIZATIONS STUCTURE
49 CONTACTS
333
Facts and Figures
Foundation: 2008
Board of director: Dr. Ar. Elhag Elsiddig Taha
General Manager: Eng. Mohammed Elhag Elsiddig Taha
Personnel: 29
Head office: Khartoum
Bank: Saudi Sudanese bank
444
About Us
HAM Electro Mechanical Engineering Co. Ltd is a 100% Sudanese company established in 2008 to provide a
substantial range of services such as electro-mechanical works for petroleum, power, industrial plants and buildings.
HAM has professional experience with vast knowledge in petroleum, industry, infrastructures & energy, and
electro-mechanical discipline in the field of construction.
Through its rich resources coupled with the financial strength, effective operational system, and extensive
experience in the field of construction and engineering as well as the high quality technical and managerial staff,
HAM recognizes any challenge posed by new projects regardless of the size or complexity of the project with its
commitment to competitive prices and compliance to all quality standards.
We are always looking forward to maintain a long-term relationship with our customers, while fulfilling their
requirements and meeting their expectations.
555
Board of Directors
The management of HAM electro mechanical adopted a company policy that focuses on long-term relationship with all firms and clients. He is
ready to explore and accept new challenges while remaining loyal to our corporate values of flexibility, commitment, and willingness to take well-
calculated risks in order to guarantee an outstanding quality in handling projects worldwide. The long term experience of our employees form the
basis of our success.
About Mr. Elhaj:
Dr. Ar. Elhag Elsiddig Taha (born in 1945)
Architect & planner Doha Municipality as Consultant Engineer
Associate Professor Omdurman Islamic University for more than 15 year
Associate Professor at New Castle University U.K for 5 years
Professor at future University, Khartoum
Owner of Gulf Trading & Contracting Company
666
Corporate Strategy
HAM aims to “Be the leading company in the electro-mechanical field". By providing the best
solutions in the world for petroleum products, power, and industrial plants in the region.
Towards this goal aim, HAM works on a strategy based on GLOBAL PARTNERSHIPS,
PROFESSIONAL EXECUTION, and ENHANCED SUPPORT towards delivering the right solution
for the customers’ needs.
HAM has a firm partnership with electro-mechanical devices, spares parts, and tools suppliers
across the region. By understanding the needs and future requirements of the industry in the
region, HAM identifies its partners and establishes a strong relationship with its partners for
an easy and continuous transfer of Technology, Products & Services. HAM interfaces with its
international partners and local industry for the best possible interest of all and reduce the
impact of barriers in international business like language, social and cultural factors.
Execution of any project is carried out in a professional and systematic manner. HAM
establishes a process to carry out the execution of the project by involving the experienced and
efficient partner.
Extended Support is what HAM concentrates on to stand apart in the industry, by ensuring its
partners are leading and established organizations it also ensures these suppliers provide
continuous support for the products and services they provide.
777
AL
WA
YS
LO
OK
ING
FO
R C
ON
TIN
UE
S I
MP
RO
VE
ME
NT
OP
PO
RT
UN
ITIE
S
OUR VISSION
OUR MISSION
OUR VALUES
To be the distinguished Electro-Mechanical leader in Africa and
Middle East
To set the highest standards in service,
reliability, safety, and cost control in
our field.
Teamwork, Commitment,
Responsibility, Transparency,
initiatives
888
Our Loyal Customers:
999
Testimonial from Our Loyal Customers
111000
Testimonial from Our Loyal Customers
111111
SERVICES & PRODUCTS
Ham Engineering is pleased to offer
the following services with top quality
genuine materials, high technical
support for the after sales services plus
dealing with international
recommended brands in various types
of equipment.
111222
Software
It is HSE and maintenance management softwarewhich provides Planning and management of operations, Monitering and follow up, Data analysis, Stock management, Asset control, and Sets budgeting plan. as well as providing easy access to record (history) for forecasting purposes.
The web application is characterized by the following features:
24 hour availability
Five levels of authority
Serves as a data base
Advantages of the web application:
Cost and time effectiveness and efficiency
User friendly (simple and easy to use
Flexible
An efficient mean of communication
Enhances decision making.
111333
Adamov Adast fuel dispensers are the results of many years of experience and a rich tradition. They feature the highest-rated hydraulics and craftsmanship and are built for fueling stations of any size. These dispensers will measure, diplay and record the quality of fuel dilevered as well as the total charge, based on the programmed unit price. Modular execution allows configuration of 1 up to 10 nozzles delivering 1 up to 5 products the dispenser enables simultaneous delivery of 2 products, one on each display side. They also feature the following characteristics:
High quality adast hydraulics.
Vapour recovery system.
Modular structure.
Operating temperature of -40 to +55 degree (celsious)celsius.
Illuminated liquid crystal diplay counter.
Non-rusting totalizer.
ELAFLEX hoses and ZVA nozzle.
Auto-diagnostic function in case of failur.
Retractable hoses.
Data connection to the station mangment software with fiscal printer.
Data connection to the POS system (point of sale)through AFSF .
Stainless steal construction and any combination of colors.
MID and ATEX certified.
1-year warranty.
111444
Suppliers in Sudan
Aman gas petrolum products co. Ltd.
Aman gas was registered in 1994. It was created after buying shell gas and benefiting from its experience. Aman gas supports fuel ans gas distributors by promoting and marketing fuel dispensers, gas stoves, (cookersnand) related equipments.
111555
Other Products
Add Value & Improvement Solutions & Products
111666
111777
111888
Flexible Pipes
111999
Fiber Glass Pipes
222000
222111
222222
222333
222444
Tank Fittings
222555
VIS
222666
Cleaning Products
222777
Service Stations
We offer a full package of srvice for Service station, commerical sites, and depot.
features:
Engineering & Design *
Supply, installation, and Commissioning
Maintenance program (Preventive and Breakdown)
HSE
Quality control and Standardize specifications
Continuous improvement
222888
Electrical Work
1. Installation of electrical equipments such as
transformers, ring main units, and main distribution
boards.
2. Low, medium, and high voltage cabling.
3. Design, install main & sub distribution boards.
4. Design and installation of electrical protection
systems such as (under voltage, phase failure, USB,
stabilizers, power factor correction, etc.).
5. Building and industrial plant lighting.
6. Security systems.
7. CCTV systems.
222999
Mechanical Work
1. Design, supply, and install:
HVAC system.
2. Plumbing.
3. Fuel line (piping)
4. Steel fabrications (such as
tanks).
5. Fire fighting system.
6. Sewage system.
333000
Piping Work
1. Water distribution.
2. Waste water
disposal.
3. Drainage system.
333111
Other Servises
HAM Engineering also provides the proactive, preventive and corrective maintenance system for: industrial
plants, building, and services stations.
Building Industrial Plant
333222
Projects & Service Contracts
PETRONAS
.
Order description: Contract scope:
-MAINTENANCE PROGRAM *Monthly preventive maintenance execution
- HSE gaps closure and Reporting
Client: * Meters calibration
PETRONAS Marketing Sudan service * Dispenser's electrical and mechanical faults
. Solving
Period: *Pipeline and tanks checks and rehab.
-2011 up to date *Electrical control checks and rehab
* HSE reporting
* Initiate remarks for better maintenance
Performance
Scope of work:
HAM ELECTROMECANICAL CO.LTD is
contracted for the maintenance contract for the
PETRONAS MARKETING Sudan’s services stations
(number of service stations is 48) in Sudan
starting from 2011 up to date and also for
commercial outlets
333333
MOAWIA M. A. ELBERIER Group
Order Description:
1- Electrical system for Moawia El-berair Islamic complex, Khartoum (September
2011)
2- Fuel system for Albrair Biscuit Factory ( July, 2013)
3- Fuel system for New Biscuit Factory (April, 2014)
Client:
MOAWIA M. A. ELBERIER Group
Albrair Biscuit Factory x
Install of Fuel system.
Moawia El-berair Islamic complex, Khartoum (September 2011)
Scope of work:
Install of fuel system and electrical &
lighting system
333444
DAL GROUP
.
Order Description:
Pipe line system
Earthing system
Fuel system
Client:
Sayga Food Industry
Period:
Feb 2012
2011
.
Scope of work:
Building Electromechanical maintenance
Scope of work:
Sayga fuel tank pipeline,
-Install and connect pipeline for two fuel tanks to
connect it with pump for loading and unload to
tanks, and boiler line.
-install and connect the electrical earth
- System with the tanks.
Sayga Flour Mills
-Provide and install new fuel system
333555
Oilibya
Scope of work:
1. Install of STP and dispensers
2. Maintain of electrical board
3. Install submersible pump (SAP)
4. Connect flexible piping (UPP) between tank and dispenser
5. Install surge protection device enclosed in panel (includes earth surge
protector , over/under voltage ,phase failure ,contactor and push bottom).
Client:
Oilibya
Period:
Sep 2015
Feb 2014
333666
Premier Farms
.
Order Description:
Install and connect pipeline
And electrical earth system
Client:
Premier Farms
Period:
April 2012
Scope of work:
Complete fuel system:
Install and connect pipeline for two tanks
With two dispensers and pump, with all
control, protection, and electrical earth system
333777
.
Khartoum Bank
Order Description:
Fire Fighting System
Air condition
Electrical security
Client:
Bank of Khartoum
Period:
2010
Scope of work:
Electromechanical works for Afra;s Mall site
(providing Fire Fighting system, electrical,
security and Air conditioning
333888
Sendyan Hotel
Order Description:
Building electromechanical maintenance
Client:
Sendyan Hotel
Period:
Feb 2013
333999
Lama Oil Factory
Order Description:
Install flow meters and clean Tanks
Client:
LAMA OIL FACTORY
Period:
DEC 2012
Scope of work:
Install flow meter and clean tanks
in LAMA Oil Factory
444000
Other Jobs
.GABCO (Aljayly and Shajarah) (APRIL 2013)
Provide and install earthlings system.
Zawaia Investment (APRIL 2013)
Install Automatic Transfer Switch (ATS).
Ain of Sudan (March 2012)
Ain of Sudan is factory for intravenous fluids, HAM company designs and installs the
fuel line system (tanks, line, and pump).
International organization for migration (IOM) (2010)
IOM is one of the international organizations that their works is under the UN
umbrella standards. HAM electromechanical company made many projects for
them.
Electrical & Lighting System for Jabal Awliya Camp.
Rehab for Electrical & Lighting System for Dar Alslam Camp.
Electrical & Lighting System for Mayo Camp.
Dismantling of Mayo Camp.
United Capital Bank (2010)
UCB Main Tower plumping Contract.
Electrical works and fire alarm system for construction site.
PETRODAR Operating Company (2010)
Centrifugal Pumps maintenance contract for two years.
444111
Design Works
1. Green Village & Alameeri MEP Design (May, 2014)
2. Nile Petroleum Service stations (March 2012).
Design for fire alarm system.
3. Iraq ambassador villa (February 2012).
Design for (electrical system, drainage system, domestic water system, fire
alarm system, data and telephone system, CCTV and public address system, and
air conditioning system).
4. Royal care outpatient clinics new extension (December 2011).
Design for (electrical system, drainage system, domestic water system, fire
alarm system, data and telephone system, CCTV and public address system)
5. Al-cardinal group Head Quarter Office. Juba (September 2011).
6. Al-Cardinal Villa, Juba (august, 2011).
7. Mayom Mayor Building (three floor) (July 2011)
8. Lecture Hall (June 2011).
9. Fish Factory, electromechanical design, Juba (May 2011).
10. High way check point design. Juba (March 2011).
11. Telecommunication center electromechanical design, Juba (February 2011)
12. Design for five- floors villa's electromechanical works. Juba (January 2011).
13. Villa Akon's electromechanical design. Juba (December 2010).
14. Design for Kuajok Hospital's electromechanical works. Juba (October 2010).
444222
HSE Policy Statements
This is the Health and Safety Policy Statement of HAM Electro Mechanical Engineering
Co Ltd. Signed on 22nd August 2010
Our statement of general policy is:
To provide adequate control of the health and safety risks arising from our work
activities;
To consult with our employees on matters affecting their health and safety;
To provide and maintain safe plant and equipment;
To ensure safe handling and use of substances;
To provide information, instruction and supervision for employees;
To ensure all employees are competent to do their tasks, and to give them
adequate training;
To prevent accidents and cases of work-related ill health;
To maintain safe and healthy working conditions; and to review and
Revise this policy as necessary at regular intervals.
444333
Quality Assurance policy
The objectives which underpin the policy are:
1. To develop a full understanding of the needs of our customers.
2. To work in close co-operation with clients, customers, suppliers and sub-contractors to provide the right quality work and
service, first time.
3. Actively to seek customer feedback and to use this as a format for continuous assessment and improvement.
4. To develop the potential of our employees to ensure all members of staff are capable of undertaking work required in a
safe and responsible manner, in accordance with the Company’s Health and Safety and Environmental policies.
Achievement of these policy aims involves all staff, who is individually responsible for the quality of their work, resulting in a
continually improving working environment for all.
HAM Electro mechanics is fully committed to delivering the objectives of this quality policy statement within all its activities and
work undertaken by the Company.
HAM Electro mechanics has implemented a management structure that is based on the quality and commitment of its professional
and experienced management and staff.
We are continually developing the Company’s operation and upgrading of IT systems and highly focusing in staff training to
professional level.
HAM Electro mechanics approach is to listen to our clients and customers and to openly discuss the individual requirements of
every contract, thus ensuring that our clients remain fully satisfied with our service delivery.
With each project we undertake, a Quality Plan is implemented, encompassing control measures that ensure the client’s
requirements are met, within the specified time, and in line with the budget. To this end, we endeavor to work as a committed team
in a spirit of co-operation with the client and their customers.
HAM Electro mechanics' management and supervisory staff has the authority to make decisions, within the scope of their
responsibilities, and is charged with working in accordance with the documented procedures.HAM Electro mechanics' objectives
are:
To continue to meet in full the requirements of the client.
To reduce waste and loss.
To carry out all our activities within our environmental policy guidelines, thus helping to ensure a sustainable environment for
the benefit of the community.
To continually identify improvements to existing working practices.
In order for HAM Electro mechanics to achieve the above objectives, every employee and sub-contractor must:
Understand customer and client needs.
Be responsible and accountable for the quality of work.
444444
Company C.V’s And Organizations
HAM ENGINEERING Company management and technical team comprise (at all levels) of knowledgeable and experienced
staff with broad working experience for over three decades in the engineering, Project Management and construction
activities.
Dr. Ar. Elhag Elsiddig Taha (Head boarder director)
Architect & planner
Doha Municipality as Consultant Engineer
Associate Professor at Omdurman Islamic University for more
than 15 years
Associate Professor at New Castle University U.K for 5 years
Professor at Computer Man College, up to date
Owner of Gulf Trading and Contracting Company
444555
Eng. Mohamed Elhag Elsiddig (General Manager)
B. Sc in Mechanical Engineering
Electro Mechanical Engineer in PETRONAS Marketing Sudan
ltd for 3 years
Training Certificates in: Aviation Product Inspector Course,
HEMP, Accident Investigation, Permit to Work & Confined
Space.
Executor of electromechanical projects
Provisional on design, install, commissioning & maintenance
of Fueling System
Eng. Amal Mirgani Osman (Manager Assistance)
Master’s of Business Administration (MBA) 2011-2012
B. Sc in Architectural Engineering
Operations Engineer International organization for
migration IOM.
Designing the organization camps and way stations.
Sites assessments and visits.
Manage the construction of them, and setting a follow up
monitoring and plan.
444666
Saif Eldin Mohamed Younis Elhassan(Technical Support) • B.Sc. Mechanical Engineering - Faculty of Engineering - University of Khartoum - April, 1978 • Engineer Specialist - Certificate of Engineering Council - Khartoum in 1993 with organic Academic Association of Engineering. Practical experiences:-
(1) Al-hassim Investment Co. Ltd. - Sudan (Jan. 2008 – March 2014) (2) Tas’helat Marketing Co. Ltd. Saudi Arabia (Nov.1999 – Nov. 2006) (3) Seif Engineering Services Enterprises - Sudan (May1993 - July 1999) (4) Mobil Oil Sudan (December 1981 - March 1993)
(5) Ministry of Irrigation, Sudan (June1978 – Dec.1981)
Eng. Mohamed Salah Elkhalifa (Business Support)
Master degree in Manufacturing Engineering
Systems (United State of America)
B.SC in Mechanical Engineering.
Business Analytical in Grapnel Tech. Services. Dec
2009 – Feb 2011
Technical Service Engineer in PETRONAS Marketing
Sudan. Dec 2005 - Dec 2006
Industrial Engineer in Moawia Elberier Jan 2004 –
Dec 2005
Assistant Consultant in International Center for
Quality Dec 2002 -Dec 2003
444777
Eng. MOHAMMED ABUGOUKH (Marketing & Sales Manager)
Master of Science in Mechanical Engineering Mar2006 to
Sep2009
Thermodynamics and Fluids Emphasis (United State of America)
B.SC in Mechanical Engineering UNIVERSITY OF KHARTOUM.
Elbarbary Engineering Co. – Hyundai Motors - Sudan Service
Manager
February 2014 – Nov 2014
Diesel Co. LTD Parts and Service Sales Manager (FG Wilson and PERKINS)
(Jun 2011 to Jan 2014)
Service Support Engineer Nov. 2003 to Jan. 2006
444888
General Manager
Electrical
Human
Resource dept. Sales &
marketing dept.
Accounting &
finance dept.
MEP dept.
Chairman
Fuel service
dept.
Mechanical Projects Sales Marketing Maintenance
Business
support dept.
IT
Preventive Breakdown Up
country
Business coordination
444999
Contacts
Eng. Mohamed Elhag
General Manager.
Tel: +249-9-12392840
E-mail: [email protected]
Eng. Amal Mirgani Osman
Manager Assistance
Tel: +249-9-12305520
E-mail: [email protected]
Eng. Mohamed Salah Elkhalifa
Business Support Manager
Tel: +249-9-12397015
E-mail: [email protected]
Eng. Mohammed Abugoukh
Marketing & Sales Manager
Tel: +249-9-25000099
E-mail: [email protected]
555000
Elriyad block (11)
Building # (16/19) 2nd floor flat # 2
Khartoum, Sudan
Tel: +249-12305520
Mob: +249-9123-92840
Web site: www.ham.sd
ADRESS