+12V Constant = WHITE/GREEN

+12v Acc. Switched = YELLOW/RED

-12V Chassis Ground = BLACK

+12V Illumination = RED/BLACK

+12V Dimmer = RED

Amp Remote = N/A

LF+ = GREEN/BLACK

LF- = LT. GREEN

RF+ = GREEN/TELLOW

RF- = GREEN/RED

LR+ = BLUE/WHITE

LR- = BLUE/BLACK

RR+= PINK

Dash Type :

Kit:Harness:Antenna Adapter: STD-ADT

Interface Adapter(s): N/A

About the Vehicle

Make: HONDA

Model: ODYSSEY

Year: 2005

In Dash Application

Wire Color Codes

Speaker Notes

Front Speaker Sizes

Speaker Adapter : N/A

Factory Assembly: Plastic housing with (3) PHS Screws

Rear

ODYSSEYHONDA

2005

CUSTOM

TBA

HA08

RR- = BLUE/YELLOW

Factory Assembly : Plastic housing with (3) PHS Screws

NOTES

Lower Door : 6 1/2" Midrange

Speaker Sizes

Dimensions:DOOR Dimensions: DASH W= 2-1/2'' L= 2-1/2'' D= 1''

Dimensions: W= 5-5/8'' L= 5-5/8''D= 3-1/4''

NOTES

Rear Door : 6 1/2"Midrange

OPTIONS

PREMIUM SYSTEMNAVIGATION

AMPLIFIER LOCATIONS:

Aftermarket Kit: SINGLE DIN

W= 5-1/2''L= 5-1/2''D= 2''

Dash Speaker: 1-1/2'' Tweeter

-

HONDA2005 ODYSSEY

Images

Front Speaker

Rear

Tweet

1. Using small pick remove panel located behind door release handle cup. Extract two Phillips head screws.2. Remove interior side mirror trim panel.3. Remove one Phillips head screw below arm rest in pocket4. Remove Plastic trim housing around door lock and window controls. Remove one Phillips head screw.5. Using panel removal tool carefully remove door panel.

1. Using panel removal tool carefully remove plastic speaker grill panel.2. Remove (3) phillips head screws and disconnect speaker harness, then remove.

Radio removal

Front Speaker

Rear Speaker

1. Using panel removal tool carefully remove the panel surround the AC controls and vents.2. Remove two Phillips head screws located bellow radio.3. Remove Phillips head screw under the rear center portion of the radio. 4. Remove radio from dash disconnect wire harness and antenna connection.

1. Using Panel removal tool carefully remove plastic pod surrounding and tweeter.2. Disconnect speaker harness and remove.

Tweeter Removal