2 FLASCHEN BOTTLES FLACONS FRASCOS - Bujno … · 2|SCHOTT DURAN® RETRACE CODE| INFORMATION 30 Los...
Transcript of 2 FLASCHEN BOTTLES FLACONS FRASCOS - Bujno … · 2|SCHOTT DURAN® RETRACE CODE| INFORMATION 30 Los...
2 | SCHOTT DURAN® RETRACE CODE | INFORMATION
29
SCHOTT DURAN® Laborglasflaschen mitChargenkennung und Qualitätszertifikat
Immer weitreichendere Anforderungen und Vorgaben bezüglich der Qualitäts-sicherung sowie der Rückverfolgbarkeit von Pack- und Hilfsmitteln (EN-ISO9000/8402, GMP, EU 178/2002) gewinnen zunehmend an Bedeutung. Um diesen Ansprüchen gerecht zu werden, sind alle SCHOTT DURAN® Laborglas-flaschen, Standflaschen, Becher und Erlenmeyerkolben mit einem „Retrace Code“ausgestattet:
Die achtstellige Chargenkennung auf den Produkten lässt eine Rückverfolgbarkeitbis hin zum Fertigungszeitpunkt und der dazugehörigen Charge zu. Der Codegestattet den Anwendern eine lückenlose Dokumentation innerhalb ihres Quali-tätsmanagementsystems und spielt daher vor allem in den Bereichen Medizin,Pharma- und Lebensmittelindustrie eine wichtige Rolle.
Mit dem Retrace Code und der dazugehörigen SCHOTT DURAN® Artikelnummerkann jeder Anwender schnell und jederzeit über das Internet (www.duran-group.com) ein Chargen- und Qualitätszertifikat für jede DURAN® Laborglasflascheabrufen. Es beinhaltet neben Herstellungsdatum auch verschiedene Hinweise bzgl. Normen und USP/EP-Konformität.
Weitere Informationen unter www.duran-group.com.
SCHOTT DURAN® Laboratory Bottleswith Batch Certificate
Increasing requirements and standards in terms of quality assurance as well as theretraceability of primary packaging and auxiliary materials (EN-ISO 9000/8402,GMP, EU 178/2002) are becoming more and more significant. To meet theserequirements, all SCHOTT DURAN® laboratory bottles, reagent bottles, beakersand Erlenmeyer flasks are marked with a “Retrace Code”:
The 8-digit batch code allows the products to be retraced to the point of produc-tion and the matching batch. The Retrace Code is a contribution to a continuousdocumentation within the user’s quality management system and it is thereforeparticularly important in the areas of medicine, the pharmaceutical and foodindustries.
By using this “Retrace Code“ and the corresponding SCHOTT DURAN® item number, every user can easily, conveniently and at any time retrieve a batch andquality certificate via the internet. Besides the production date, the certificate alsoprovides information on conformity with standards and USP/EP.
You will find further information on www.duran-group.com.
NEUJetzt auch bei Bechern und Erlenmeyer Kolben
NEWNow on beakers and Erlenmeyer flasks, too.
2 | SCHOTT DURAN® RETRACE CODE | INFORMATION
30
Los frascos para laboratorio SCHOTT DURAN® con certificado delote de fabricación
Los cada vez más amplios requisitos y disposiciones de aseguramiento de calidadasí como la posibilidad de un posterior seguimiento de los medios de envase y de auxiliares (EN-ISO 9000/8402, GMP, EU 178/2002) van ganando importancia.Para poder cumplir dichos requisitos, todas los frascos para laboratorio, frascos,vasos y Erlenmeyer SCHOTT DURAN® están rotuladas con un “Retrace Code”.
La rotulación de lote de fabricación de ocho dígitos en los productos permite unseguimiento posterior de la fecha de fabricación y el correspondiente número delote de la misma. Dicha codificación facilita al usuario la documentación continu-ada en su sistema de gestión de calidad y es por ello de suma importancia en lossectores de las industrias de medicina, farmacéutica y de alimentación.
Junto con el “Retrace Code” y el correspondiente número de artículo SCHOTTDURAN® el usuario puede solicitar rápidamente y en todo momento via Internet(www.duran-group.com) el certificado de calidad y el lote de fabricación quecontiene a parte de la fecha de fabricación también varias indicaciones en relación a varias normativas y la conformidad USP/EP.
Consulte más informaciones bajo www.duran-group.com.
Les flacons de laboratoire en verreSCHOTT DURAN® avec numéro de lot
L’augmentation constante des standards et besoins en assurance qualité, dans les laboratoires de procédé ou en production, et la nécessité de la traçabilité dechaque produit, emballage, et intermédiaire de fabrication selon (EN-ISO9000/8402, GMP, EU 178/2002) est une réalité chaque jour plus présente. Afin deproposer une solution concrète, à la hauteur de cet enjeu, SCHOTT a développéle « code de traçabilité » qui est imprimé sur tous les flacons, becher et ErlenmeyerSCHOTT DURAN®.
Ce code, numéro à huit chiffres présent sur les produits en verre SCHOTT DURAN®,permet de retrouver pour chaque flacon son lieu de production et le lot dont ilest issu. Ce code, qui permet un suivi continu par les systèmes de contrôle de laqualité, est particulièrement bien adapté au domaine médical ainsi qu’aux indu-stries pharmaceutiques et agro-alimentaires.
Grâce aux informations contenues dans ce numéro de code de traçabilité, l’utilisateur final pourra, très simplement, et à tout moment, retrouver sur Internetle certificat de qualité par lot et les dates de production. En outre ce certificatcontient aussi, à côté de la date de production, toutes les informations sur lesnormes et spécifications pour la conformité USP/EP.
Informations complémentaires sur : www.duran-group.com.
NOUVEAU
Dès maintenant aussi sur
béchers et fioles Erlenmeyer
NUEVO
Ahora también en los vasos
y matraces Erlenmeyer
200
100
300
400
AP
PR
OX
. V
OL
.
Made in Germany
500 ml
00000000Retrace Code
200
100
300
400
AP
PR
OX
. V
OL.
Made in Germany
500 ml
00000000Retrace Code
31
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Laborflaschen mit DIN-Gewinde, ISO 4796mit Teilungmit Retrace Code
Laboratory bottles with DIN thread, ISO 4796graduatedwith Retrace Code
Flacons de laboratoire (filetage DIN), ISO 4796avec graduationavec Retrace Code
Frascos para laboratorio con roscaDIN, ISO 4796graduadoscon Retrace Code
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantity
ml GL mm mm
Ohne Kappe und Ausgießring/Without cap and pouring ringsans capuchon ni bague de déversement/sin tapa ni anillo de vertido21 801 142 25 25 36 70 1021 801 17 50 32 46 87 1021 801 24 100 1 45 56 100 1021 801 36 250 1 45 70 138 1021 801 44 500 1 45 86 176 1021 801 54 1 000 1 45 101 225 1021 801 63 2 000 1 45 136 260 1021 801 73 5 000 45 182 330 121 801 86 10 000 45 227 410 121 801 88 15 000 45 268 445 121 801 91 20 000 45 288 505 1Mit Schraubverschluss-Kappe und Ausgießring aus PP (blau)With PP screw-cap and PP pouring ring (blue)avec capuchon vissé et bague de déversement en PP (bleus)con tapa roscada y anillo de vertido de PP (azul)21 801 14 52 25 25 36 74 1021 801 17 5 50 32 46 91 1021 801 24 5 100 1 45 56 105 1021 801 36 5 250 1 45 70 143 1021 801 44 5 500 1 45 86 181 1021 801 54 5 1 000 1 45 101 230 1021 801 63 5 2 000 1 45 136 265 1021 801 73 5 5 000 45 182 335 121 801 86 5 10 000 45 227 415 121 801 88 5 15 000 45 268 450 121 801 91 5 20 000 45 288 510 1
Chemische und thermische Beständigkeit siehe Seite 142.Chemical and thermal properties see page 164.En ce qui concerne les propiétés chimiques et thermiques, se reporter au tableau de la page 186.Ver propiedades químicas y térmicas en tabla pág. 208.
1Eine ringförmige Verstärkung an der Schulter der Flaschen von 100–2000 ml macht die Füllhöhe des Nenninhaltes sichtbar.
1A bead is moulded in the glass on the shoulder of the 100–2000 ml sizes to indicate the nominal capacity level.
1L’amplification de l’épaulement des flacons permet de voir plus aisement le niveau du contenu.
1Un anillo de refuerzo situado en el comienzo del estrechamiento de los frascos desde 100 a 2000 ml indica la altura de llenado del contenido nominal.
2Mit speziell geformtem Glasrand zum besseren Aus-gießen (damit entfällt ein zusätzlicher Ausgießring aus Kunststoff).
2Bottle with specially formed glass lip for better pouring (this makes an additional plastic pouring ring unnecessary).
2Avec un bord en verre de forme spéciale pour un meilleur déversement (la bague de déversement en matière plastique supplémentaire n’est donc plus nécessaire).
2Frasco con borde de vidrio especialmente formado para verter mejor (no es necesario un anillo adicional de plástico para verter).
200
100
300
400
AP
PR
OX
. V
OL
.
Made in Germany
500 ml
00000000Retrace Code
Laborflaschen mit DIN-Gewinde,ISO 4796, braunmit Teilung, ohne Kappeund Ausgießringmit Retrace Code
Laboratory bottleswith DIN thread, ISO 4796, ambergraduated, without capand pouring ringwith Retrace Code
Flacons de laboratoireDURAN (filetage DIN),verre brun, ISO 4796avec graduation, sanscapuchon ni bague dedéversementavec Retrace Code
Frascos para laborato-rio con rosca DIN,topacio, ISO 4796graduados, sin tapa nianillo de vertidocon Retrace Code
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantity
ml GL mm mm
21 806 142 25 25 36 70 1021 806 17 50 32 46 87 1021 806 24 100 1 45 56 100 1021 806 36 250 1 45 70 138 1021 806 44 500 1 45 86 176 1021 806 54 1 000 1 45 101 225 1021 806 63 2 000 1 45 136 260 1021 806 73 5 000 45 182 330 121 806 86 10 000 45 227 410 121 806 88 15 000 45 268 445 121 806 91 20 000 45 288 505 1
32
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
10010100100
300
400400400400
500 ml
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantityklar/clear ml GL mm mm
10 926 76 25 2 25 36 70 1010 926 77 50 32 46 87 1021 805 24 100 1 45 56 100 1021 805 36 250 1 45 70 138 1021 805 44 500 1 45 86 176 1021 805 54 1 000 1 45 101 225 1021 805 63 2 000 1 45 136 260 1021 805 73 5 000 45 182 330 1
1Eine ringförmige Verstärkung an der Schulter der Fla-schen von 100–2000 ml macht die Füllhöhe des Nenninhaltes sichtbar.
1A bead is moulded in the glass on the shoulder of the100–2000 ml size to indicate the nominal capacitylevel.
1L’amplification de l’épaulement des flacons permet de voir plus aisement le niveau du contenu.
1Un anillo de refuerzo situado en el comienzo del estrechamiento de los frascos desde 100 a 2000 ml indica la altura de llenado del contaenido nominal.
2Mit speziell geformtem Glasrand zum besseren Aus-gießen (damit entfällt ein zusätzlicher Ausgießring aus Kunststoff).
2Bottle with specially formed glass lip for better pouring (this makes an additional plastic pouring ring unnecessary).
2Avec un bord en verre de forme spéciale pour un meilleur déversement (la bague de déversement en matière plastique supplémentaire n’est donc plus nécessaire).
2Frasco con borde de vidrio especialmente formado para verter mejor (no es necesario un anillo adicional de plástico para verter).
3Chemische und thermische Beständigkeit siehe Seite 142,146.
3Chemical and thermal properties see page 164, 168.3Résistance chimique et thermique voir page 186, 190.3Estabilidad química y térmica véase página 208, 212.Ersatzkappen und Ausgießringe siehe Seite 36, 37.
For spare-caps and pouring ring see page 36, 37.Pour les capuchons à visser et les bagues de déversement: voir notre catalogue page 36, 37.Para tapas roscadas y anillos de vertido véase pág. 36, 37.
800
PB
-1
/+1
,5 b
ar
TB
14
0∞
C3
0 K
T
100
200
300
400
500
600
700
AP
PR
OX
. V
OL
.
Made in Germany
1000 ml
00000000Retrace Code
800
PB
-1
/+1
,5 b
ar
TB
14
0∞
C3
0 K
T
100
200
300
400
500
600
700
AP
PR
OX
. V
OL
.
Made in Germany
1000 ml
00000000Retrace Code
Ersatzkappen und Ausgießringe siehe Seite 36, 37.For spare-caps and pouring ring see page 36, 37.Pour les capuchons à visser et les bagues de déversement: voir notre catalogue page 36, 37.Para tapas roscadas y anillos de vertido véase pág. 36, 37.
Autoklavieranweisung siehe Seite 147.For Autoclaving instructions see page 169.Pour l’Instruction d’autoclavage voir notre catalogue page 191.Para Instrucciones de autoclavado véase pág. 213.
Das DURAN® pressure plus Programm ist druckfest nach DIN ISO 1595.The DURAN® pressure plus programme is pressure resistant in accordance to DIN ISO 1595.Le programme pression plus de DURAN® correspond an normes de résistance à la pression selon DIN ISO 1595.El programa de presión plus DURAN® es resistente a la presión según la norma DIN ISO 1595.
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantity
ml GL mm mm
klar/clear/clair/transparente10 922 34 250 45 70 138 1010 922 35 500 45 86 176 1021 810 54 1 000 45 101 225 10braun/amber/brun/topacio10 943 67 250 45 70 138 1010 943 68 500 45 86 176 1021 816 54 1 000 45 101 225 10
Flacons de laboratoireDURAN (filetage DIN),à gainage synthétique(PU), ISO 4796 sans capuchon ni baguede déversementavec Retrace Code
Frascos para laboratoriocon rosca DIN, provis-tos de recubrimientoen material plástico(PU), ISO 4796sin tapa ni anillo vertidocon Retrace Code
Laborflasche mit DIN-GewindeISO 4796, druckfest – 1/+ 1,5 bar,blaue Teilungohne Kappe und ohneAusgießringmit Retrace Code
Laboratory bottleswith DIN threadISO 4796, pressureresistant – 1/+ 1,5 bar,blue graduationwithout cap and pouring ringwith Retrace Code
Flacons de laboratoireDURAN (filetage DIN)ISO 4796, résistant à lapression – 1/+ 1,5 bar,avec graduation bleusans capuchon ni baguede déversementavec Retrace Code
Frascos para laborato-rio con rosca DINISO 4796, resistente aupresión – 1/+ 1,5 bar,graduación azulsin tapa ni anillo vertidocon Retrace Code
Laborflaschen mit DIN-Gewinde,ISO 4796, Kunststoff-ummantelt (PU), ohne Kappe und ohneAusgießringmit Retrace Code
Laboratory bottles, with DIN thread, ISO 4796, plastic coated (PU), without cap and pouring ringwith Retrace Code
DURAN® Protect3
DURAN® pressure plus
33
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
DURAN® Vierkant-Labor-flaschen, mit blauemAusgießring und blauerSchraubverschlusskappeaus PP1 komplettiertmit Retrace Code
DURAN® square bottlescomplete with blue pouring ring and bluescrew cap made of PP1
with Retrace Code
DURAN® Flacons de laboratoire carréslivrés avec bouchon etbague anti-goutte bleus en PP1
avec Retrace Code
DURAN® Frascos cuadrados,completo con tapa roscada y anillo de vertidode PP1 (azul)con Retrace Code
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantity
ml GL mm mm
21 820 24 5 100 32 50 109 1021 820 36 5 250 45 64 143 1021 820 44 5 500 45 78 181 1021 820 54 5 1 000 45 94 222 10
NEU/NEW/NOUVEAU/NUEVO
SCHOTT DURAN®
Premium-Flasche,komplett mit Ausgießringund Verschluss (TpCh 2601),Temperaturwechsel-beständigkeit 160 K (nachDIN ISO 718 GS- geprüft),DMF 19 757, Skalierung ± 5% Genauigkeit undgegenläufig mit Retrace Code
SCHOTT DURAN®Premium bottle,complete with pouringring and screw cap (TpCh 2601), thermal shockresistance 160 K (approvedin accordance to ISO 718,certified by GS-mark),DMF 19757, Scale accura-cy ± 5%, reverse scalewith Retrace Code
SCHOTT DURAN®Flacon Premium,livré avec bague et capu-chon (TpCh 2601), palierde chauffe et de refroidis-sement de 160 K (selonDIN ISO 718 GS- sécuritééprouvée), DMF 19 757,Précision de la graduation± 5%, pour remplir etquantifier les volumesdéversésavec Retrace Code
SCHOTT DURAN® frascoPremium, completo conanillo de vertido y tapa(TpCh 2601) resistente acambios de temperaturade 160 K (aporobadosegun ISO 718, y acredi-tado con la marca deseguridad GS), DMF19757, con escola de pre-cision contraria ± 5%con Retrace Code
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantity
ml GL mm mm
11 270 75 100 45 56 100 1011 270 76 250 45 70 138 1011 270 77 500 45 86 176 1011 270 78 1 000 45 101 225 10
1 0 0
0 0 2
0 0 3
0 0 4
0 0 5
0 0 6
0 0 7
0 0 8
0 0 9
1 0 0 0 l m
y n a m r e G n i e d a M
0 0 0 0 0 0 0 0 e d o C e c a r t e R
NARUD
OHCS
1 0 0
0 0 2
0 0 3
0 0 4
0 0 5
0 0 6
0 0 7
0 0 8
0 0 9
± % 5 ± % 5
K 0 6 1 T Δ 8 1 7 O S I N I D
dnalniehRVÜT
ytefaS tcudorP ciS eh rh tieeg ürp tf e
h
d
Chemische und thermische Beständigkeit siehe Seite 142.Chemical and thermal properties see page 164.En ce qui concerne les propiétés chimiques et thermiques, se reporter au tableau de la page 186.Ver propiedades químicas y térmicas en tabla pág. 208.
34
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
0 0 8
r a b 5 , 1 + / 1 - B P
B T C ° 0 4 1
K 0 3 T
0 0 1
0 0 2
0 0 3
0 0 4
0 0 5
0 0 6
0 0 7
AP
PR
OX
. V
OL
.
y n a m r e G n i e d a M
0 0 0 0 0 0 0 0 e d o C e c a r t e R
5 9 5 1 N E N I D
1 0 0 0 l m
ARUD N
OHCS
dnalniehRVÜT
ytefaS tcudorP ciS eh rh tieeg ürp tf e
h
d
NEU/NEW/NOUVEAU/NUEVO
SCHOTT DURAN® HPLC-Flasche, GL 45, komplettmit 4 Port-Schraubver-schluss PP1 und Dichtungen, druckfest –1 / + 1,5 bar, mit Retrace Code
SCHOTT DURAN® HPLCbottle, GL 45, completewith 4 port screw cap PP1
and seals, pressure resistant –1 /+ 1.5 bar, with Retrace Code
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantity
ml GL mm mm
11 298 21* 500 45 86 1761 211 298 20* 1000 45 101 2251 2Zubehör/Accessory11 298 12
11 298 13 1
11 378 01 1
11 298 19 2
*Ersatzflasche S. 32 1nur Flasche*Replacement bottle page 32 1bottle only *Flacon de rechange page 32 1seulement le flacon *Frasco de recambio pagina 32 1unicamente frasco
Flacon SCHOTT DURAN®
HPLC, GL 45, completavec capuchon à vis PP1 etjoints inclus, résistant à lapression –1 /+ 1.5 bar,avec Retrace Code
Frasco SCHOTT DURAN®
HPLC, GL 45, completocon cierres roscados de 4 puertos PP1 y juntas, resistente au presión –1 /+ 1.5 bar, con Retrace Code
AP
PR
OX
. V
OL.
0 0 1
0 0 2
0 0 3
0 0 4
0 0 5
0 0 6
0 0 7
0 0 8
0 0 9
l m 0 0 0 1
y n a m r e G n i e d a M
0 0 0 0 0 0 0 0 e d o C e c a r t e R
0 0 0 1
3 8 9 1 8 3 . o N n g i s e D U E
ARUD N
OHCS h
d
NEU/NEW/NOUVEAU/NUEVO
DURAN® GLS 80LaborglasflascheWeithals mit GLS 80Gewinde und Schnell-schraubverschluss aus PP1 (140 °C) komplettiert, mit Retrace Code
DURAN® laboratorybottle wide neck,with GLS 80 thread withquick release closure PP1 (140 °C) completed,with Retrace Code
DURAN® flacon de laboratoire à col large, GLS 80 filetage et bouchon à fermeture rapide PP1 (140 °C) complet, avec Retrace Code
DURAN® frasco paralaboratorio de cuelloancho, y rosca GLS 80con cierre rápido en PP1 (140° C) completo, con Retrace Code
Schraubverschluss HPLC, GL 45, 4 Port komplettScrew cap HPLC, GL 45, 4 ports completeCapuchon à vis HPLC, GL 45, 4 ports completCierra roscado HPLC, GL 45, 4 puertos completo
Ersatzset für HPLC-SchraubverschlussSpare part set for HPLC screw capKit de rechange pour capuchon à vis HPLCJuego de repuesto para cierre roscado HPLC
Druckausgleichset für 4-Port-Verschluss (0,2 µm inkl. Membranfilter)Pressure equalization set for 4-port cap(0.2 µm incl. membrane filter)Kit de compensation de pression pour capuchon 4 ports (filtre à membrane 0,2 µm inclus)Juego compensador de la presión para cierre de 4 puertos (0,2 µm incl. filtro de membrana)
Ersatz-Membranfilter für Druckausgleichset, 0,2 µmSpare membrane filter for pressure equalization set, 0.2 µmFiltre à membrane de rechange pour kit de compensation de pression, 0,2 µmFiltro de membrana de repuesto para juego compensador de la presiòn, 0,2 µm
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantity
ml GL mm mm
klar/clear/clair/transparente11 126 27 500 80 101 148 1011 127 13 1 000 80 101 218 1011 127 15 2 000 80 136 248 1011 139 49 5 000 80 182 311 111 139 50 10 000 80 227 395 111 139 51 20 000 80 288 483 1braun/amber/brun/topacio
11 601 46 500 80 101 148 1011 601 47 1 000 80 101 218 1011 601 48 2 000 80 136 248 1011 601 49 5 000 80 182 311 111 601 50 10 000 80 227 395 111 601 51 20 000 80 288 483 1
1Chemische und thermische Beständigkeit siehe Seite 142.1Chemical and thermal properties see page 164.1En ce qui concerne les propiétés chimiques et thermiques, se reporter au tableau de la page 186.1Ver propiedades químicas y térmicas en tabla pág. 208.
35
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
NEU/NEW/NOUVEAU/NUEVO
NEU/NEW/NOUVEAU/NUEVO
Best.-Nr. Gewinde d h Originalpckg./StückCat. No. thread Stand. pack/quantity
GLS mm mm
11 127 16 80 86 40 10h
d
SchnellschraubverschlussGLS 80 aus PP1 (140 °C )für DURAN® WeithalsLaborglasflasche mit GLS 80 Gewinde
Quick release closureGLS 80 made of PP1
(140 °C) suitable forDURAN® laboratory wide-neck bottles with GLS 80 thread
Bouchon à fermeture rapide GLS 80 en PP1 (140 °C) pour flacons de laboratoire á col largeGLS 80 DURAN®
Cierre rápido de plásticoGLS 80 en PP1 (140 °C)para frascos laboratoriode cuello ancho DURAN®
GLS 80
Best.-Nr. Gewinde d h Originalpckg./StückCat. No. thread Stand. pack/quantity
GLS mm mm
11 601 66 80 6,85 10
Ausgießring für GLS 80Flaschen, PP1 (140 °C),blau
PP1 pouring ring for GLS80 bottles, blue, (140 °C)
Bague de deversementen PP1 pour flacon deGLS 80, bleu, (140 °C)
Anillo de vertido en PP1
para frasco GLS 80, azul,(140 °C)
Best.-Nr. Gewinde d h Originalpckg./StückCat. No. thread Stand. pack/quantity
GLS mm mm
11 601 68 80 86 40 2h
d
Membran-VerschlussGLS 80 aus PP1, blau, mit eingeschweißter PTFE-Membran (0,2 µm)für Druckausgleich,beständig bis 140 °C
PP1 membrane screw capGLS 80, blue, welded-inPTFE membrane (0.2 µm)for pressure compensation,temp. resistant to 140 °C
Capuchon en membraneGLS 80 en PP1, bleu, avec membrane en PTFE soudé, (0,2 µm)pour compensation depression, résistant jusqu’ à 140 °C
Tapa GLS 80 PP1, azul,con membrana solada de PTFE (0,2 µm) para compensasion de presión,resistente hasta 140 °C
NEU/NEW/NOUVEAU/NUEVO
1Chemische und thermische Beständigkeit siehe Seite 142.1Chemical and thermal properties see page 164.1En ce qui concerne les propiétés chimiques et thermiques, se reporter au tableau de la page 186.1Ver propiedades químicas y térmicas en tabla pág. 208.
1Chemische und thermische Beständigkeit siehe Seite 142.1Chemical and thermal properties see page 164.1En ce qui concerne les propiétés chimiques et thermiques, se reporter au tableau de la page 186.1Ver propiedades químicas y térmicas en tabla pág. 208.
1Chemische und thermische Beständigkeit siehe Seite 142.1Chemical and thermal properties see page 164.1En ce qui concerne les propiétés chimiques et thermiques, se reporter au tableau de la page 186.1Ver propiedades químicas y térmicas en tabla pág. 208.
36
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
1Chemische und thermische Eigenschaften siehe Tabelle Seite 142.
1Chemical and thermal properties see page 164.1En ce qui concerne les propriétés chimiques et thermiques, se reporter au tableau de la page 186.
1Ver propiedades químicas y térmicas en tabla pág. 208.
Best.-Nr. DIN-Gewinde Farbe d h Originalpckg./StückCat. No. DIN thread Colour Stand. pack/quantity
GL mm mm
Kappe/Cap10 886 792 45 farblos/colourless 54 26 5Ausgießring/Pouring ring10 886 782 45 farblos/colourless 4 5
Membran-Schraubver-schlusskappe aus PP1, miteingeschweißter PTFE1
Membran3 für Druckaus-gleich, beständig bis140°C, ideal zumAutoklavieren
Membrane3 screw capmade of PP1, welded-inPTFE1 membrane for pressure compensation,temp. resistant to 140°C,ideal for autoclaving
Capuchon en membraneen PP1, avec membrane3
en PTFE1 soudé pourcompensation de pression,résistant jusqu’à 140°C,ideal pour l’autoclavage
Tapa PP1 con membrana3
soldada de PTFE1 paracompensación de presión,resistente hasta 140°C,ideal para autoclave
Best.-Nr. DIN-Gewinde Farbe d h Originalpckg./StückCat. No. DIN thread Colour Stand. pack/quantity
GL mm mm
10 886 552 45 blau/blue 54 26 5
2Autoklavierbar bis 140°C Wasserdampf2Autoclavable up to 140°C steam2Autoclavable jusqu’à 140°C sous vapeur2Esterilizable al vapor de aqua hasta 140°C3Porengrösse 0,2 µm3Average pore size 0,2 µm3Grosseur de pore 0,23Poro 0,2 µm
1Chemische und thermische Eigenschaften siehe Tabelle Seite 142.
1Chemical and thermal properties see page 164.1En ce qui concerne les propriétés chimiques et thermiques, se reporter au tableau de la page 186.
1Ver propiedades químicas y térmicas en tabla pág. 208.
Premium-Schraubver-schlusskappe ausTpCh2601 mit Dichtung,beständig –196 °C bis+260 °C, Heißluft-Sterilisation, USP/FDAkonform; Ausgießring ausTpCh2601
Premium screw capmade of TpCh2601 withseal, temp. resistant –196 °C to +260 °C, hot-air sterilization,USP/FDA standard conformity; pouring ringmade of TpCh2601
Capuchon de préférenceen TpCh2601 avec jointsoudé, résistant de –196 °C jusqu’à +260 °C,stérilisation à l’air chaud,conforme au USP/FDA;bague de déversement en TpCh2601
Tapa de preferencia enTpCh2601 con junta soldada, resistente entre–196 °C hasta +260 °C,esterilización por aircaliente, conforme aUSP/FDA; anillo de vertido en TpCh2601
2Autoklavierbar, temperaturbeständig bis 260°C2Autoclavable, temperature resistant up to 260°C2Autoclavable, resistant aux températures jusqu’à 260°C2Esterilizable, resistente a temperatura hasta 260°C
37
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Schraubverschluss-Kappen aus PBT1, rotkomplett mit PTFEbeschichteter Dichtung,beständig bis 180°CAusgießringe aus ETFE1,rot
Screw-caps made ofPBT1, red, completewith PTFE protected seal,to withstand up to180°C ETFE1 Pouringrings, red
Capuchon à visser enPBT1, rouge, completavec joint revêtu de PTFE,résistant jusqu’à 180°C;Bague de déversementen ETFE1, rouge
Tapas de cierre roscadasde PBT1, rojo, completascon junta revestida dePTFE, estable hasta 180°C;Anillo de vertido enETFE1, rojo
Schraubverschluss-Kappen aus PP1
mit Lippendichtung,Ausgießringe aus PP1
PP1 screw-capswith lip seal, PP1 pouring rings
Capuchon à visser enPP1, avec joint à lèvre,bague de déversement enPP1
Tapa de plástico en PP1
con junta de labios, anillo de vertido en PP1
Best.-Nr. DIN-Gewinde d h Originalpckg./StückCat. No. DIN thread Stand. pack/quantity
GL mm mm
Kappen/Caps29 240 13 25 33 23 1029 240 19 32 41 26 1029 240 28 45 54 28 10Ausgießringe/Pouring rings29 244 19 32 4 1029 244 28 45 4 10
1Chemische und thermische Eigenschaften siehe Tabelle Seite 142.1Chemical and thermal properties see page 164.1En ce qui concerne les propriétés chimiques et thermiques, se reporter au tableau de la page 186.1Ver propiedades químicas y térmicas en tabla pág. 208.
Schraubverbindungskappen mit Bohrung, Silikondichtungen mit Bohrung und Septa siehe Seite 132, 133.See pages 132, 133 for plastic screw-caps with aperture, silicone rubber sealing rings with aperture and Septa.Capuchons vissables (ouverts), rouge joints en silicone (VMQ) percé et à percer voir page 132, 133.Caperuzas roscadas de unión, perfordas; juntas de silicona perforadas y Septum, ver pág. 132, 133.
Best.-Nr. DIN-Gewinde Farbe d h Originalpckg./StückCat. No. DIN thread Colour Stand. pack/quantity
GL mm mm
Kappen/Caps29 239 132 25 blau/blue 33 19 1029 239 192 32 blau/blue 40 24 1029 239 282 45 blau/blue 54 26 1029 338 28 02 45 gelb/yellow 54 26 1029 338 28 62 45 grün/green 54 26 1029 338 28 82 45 grau/grey 54 26 10Ausgießringe/Pouring rings29 242 192 32 blau/blue 4 1029 242 282 45 blau/blue 4 1010 899 112 45 grün/green 4 1010 899 142 45 grau/grey 4 1010 899 172 45 gelb/yellow 4 10
1Chemische und thermische Eigenschaften siehe Tabelle Seite 142.
1Chemical and thermal properties see page 164.1En ce qui concerne les propriétés chimiques et thermiques, se reporter au tableau de la page 186.
1Ver propiedades químicas y térmicas en tabla pág. 208.
2Autoklavierbar bis 140°C Wasserdampf2Autoclavable up to 140°C steam2Autoclavable jusqu’à 140°C sous vapeur2Esterilizable al vapor de aqua hasta 140°C
h
d
Originalitätsverschlussaus PP1 für Laborflaschenmit DIN-Gewinde ISO 4796
PP1 Tamper-evidentscrew caps for Laboratorybottles with DIN threadISO 4796
Capouchons avec bagued’inviolabilite en PP1
pour Flacons de labor-atoire (filetage DIN), ISO 4796
Tapas con precinto enPP1 para Frascos paralaboratorio con roscaDIN, ISO 4796
Best.-Nr. DIN-Gewinde Farbe d h Originalpckg./StückCat. No. DIN thread Colour Stand. pack/quantity
GL mm mm
Mit Lippendichtung/with lip seal10 175 262 45 blau-rot/blue-red 66 38 10mit PTFE beschichteter Silikondichtung/with PTFE silicone seal11 558 862 45 blau-gelb/blue-yellow 66 38 10
2Autoklavierbar bis 140°C Wasserdampf2Autoclavable up to 140°C steam2Autoclavable jusqu’à 140°C sous vapeur2Esterilizable al vapor de aqua hasta 140°C
1Chemische und thermische Eigenschaften siehe Tabelle Seite 142.
1Chemical and thermal properties see page 164.1En ce qui concerne les propriétés chimiques et thermiques, se reporter au tableau de la page 186.
1Ver propiedades químicas y térmicas en tabla pág. 208.
38
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Best.-Nr. DIN-Gewinde Originalpckg./StückCat. No. DIN thread Stand. pack/quantity
GL
1129750 Schraubverschluss GL 45, PP, 2 Anschlüsse GL 14 45 2Screw Cap GL 45 PP, 2 Port GL 14Capuchon à vis GL 45, PP, 2 ports GL 14Cierre roscado GL 45, PP, 2 puertos GL 14
1129751 Schraubverschluss GL 45, PP, 3 Anschlüsse GL 14 45 2Screw cap GL 45, PP, 3 Port GL 14Capuchon à vis GL 45, PP, 3 ports GL 14Cierre roscado GL 45, PP, 3 puertos GL 14
1129814 Schraubverschluss GL 14 für Schlauchanschluss 14 2Screw Cap GL 14 for hose connectionCapuchon à vis GL 14 pour raccord de tubeCierre roscado GL 14 para conectar tubos flexibles
1129815 Einsatz für Schraubverschluss GL 14, 1,6 mm [1/16 Zoll] iØ 1Insert for srew cap GL 14, 1.6 mm [1/16 Zoll] iØRajout pour capuchon à vis GL 14, 1,6 mm [1/16 pouce] iØCierro roscado insertable GL 14, 1,6 mm [1/16 pulgada] enØ
1129816 Einsatz für Schraubverschluss GL 14, 3,0 mm [1/8 Zoll] iØ 1Insert for srew cap GL 14, 3.0 mm [1/8 Zoll] iØRajout pour capuchon à vis GL 14, 3,0 mm [1/8 pouce] iØCierro roscado insertable GL 14, 3,0 mm [1/8 pulgada] enØ
1129817 Einsatz für Schraubverschluss GL 14, 3,2 mm [1/8 Zoll] iØ 1
Insert for srew cap GL 14, 3.2 mm [1/8 Zoll] iØRajout pour capuchon à vis GL 14, 3,3 mm [1/8 pouce] iØ
Cierro roscado insertable GL 14, 3,2 mm [1/8 pulgada] enØ
1129818 Einsatz für Schraubverschluss GL 14, 6,0 mm 1[1/4 Zoll] iØ
Insert for srew cap GL 14, 6.0 mm [1/4 Zoll] iØRajout pour capuchon à vis GL 14, 6,0 mm [1/4 pouce] iØ
Cierro roscado insertable GL 14, 6,0 mm [1/4 pulgada] enØ
1156292 Schraubverschluss, PBT, mit PTFE beschichteter 14 2Dichtung, GL 14, rotScrew cap, PBT, with PTFE protected seal, red, GL 14Capuchon vissable, PBT, avec joint enduits de PTFE, rougeCaperuza de unión rosca, PBT, con juntas revestida de PTFE, rojo
1137799 Druckausgleichset für 2- u. 3-Anschluss-Verschluss 1(inkl. 0,2 µm Membranfilter)
Set for pressure compensation 2 and 3 port screw cap (incl. 0.2 µm membrane filter)Kit de compensation de pression pour capuchon à 2 ou 3 ports (filtre à membrane 0,2 µm inclus)
Juego compensador de la presión para cierre de 2 y 3 puertos (incl. filtro de membrana de 0,2 µm)
1129819 Ersatz Membranfilter für Druckausgleich, 0,2 µm 2Spare membrane filter for pressure compensation, 0.2 µm
Filtre à membrane de rechange pour compensation de pression, 0,2 µmFiltro de membrana de repuesto para compensador de la presión, 0,2 µm
Anschluss-System,Schraubverschluss GL 45,2 oder 3 Port (GL 14), flexibles Baukastensystem,verschiedene Schlauch-durchmesser (1,6 – 6,0 mm), PP1
(140 °C, autoklavierbar)
Multiport-System, for screw cap GL 45, 2 or 3 Port (GL 14),modular system, differenthose sizes (1,6 – 6,0 mm),PP1 (140 °C, autoclavable)
Système de raccords,Capuchons à vis GL 45, 2 ou 3 sorties (GL 14)Système flexible modulaire,des diamètres differentsde tubes (1,6 – 6,0 mm),PP1 (140 °C, autoclavable)
Sistema de conexiónpara tapa GL 45, 2 o 3puertos (GL 14) sistema de conexiones modulares,diferentes tubos flexibles(1,6 – 6,0 mm), PP1 (140 °C, autoclavable)
NEU/NEW/NOUVEAU/NUEVO
BESTELLBEISPIELSie möchten zwei Flaschen mit einem 3-Port-Anschluss System ausstatten. Sie wollen mit zwei unterschiedlichen Schlauchdurchmessern (1,6 mm und 3 mm) und Druckausgleich arbeiten. Dafür benötigen Sie folgendeEinzelkomponenten: Schraubverschluss GL 45 3 Port (Art.-Nr. 1129751) 1x [VE 2 Stück]; Schraubverschluss GL 14 (Art.-Nr. 1129814) 2x [VE 2 Stück];Einsatz für Schraubverschluss GL14 1,6 mm iØ, (Art.-Nr. 1129815) 2x [VE 1Stück]; Einsatz für Schraubverschluss GL14 3,0 mm iØ, (Art.-Nr. 1129816) 2x[VE 1 Stück] Druckausgleichset (komplett) (Art.-Nr. 1137799) 2x [VE 1 Stück]
ORDERING EXAMPLEYou want to fit two bottles with a three-port connection system. You want towork with two different tube diameters (1.6 mm and 3 mm) and pressureequalization. You will need the following individual components: Screw capGL 45 3 ports (Art. No. 1129751) 1x [PackQty 2 each]; Screw cap GL 14 (Art. No. 1129814) 2x [PackQty 2 each], Insert for screw cap GL14 1.6 mm iØ,(Art. No. 1129815) 2x [PackQty 1 each], Insert for screw cap GL14 3,0 mm iØ,(Art. No. 1129816) 2x [PackQty 1 each],Pressure equalization set (complete)(Art. No. 1137799) 2x [PackQty 1 each]
EXEMPLE DE COMMANDEVous souhaitez équiper deux flacons avec un système de raccords à 3 ports.Vous souhaitez utiliser deux diamètres différents de tubes (1,6 mm et 3 mm)et effectuer une compensation de pression. Pour cette opération les pièces suivantes sont nécessaires : Capuchon à vis GL 45 3 ports (Réf. de l’article1129751) 1x [Quantité 2 pièces], Capuchon à vis GL 14 (Réf. de l’article1129814) 2x [Quantité 2 pièces], Rajout pour capuchon à vis GL14 1,6 mmiØ, (Réf. de l’article 1129815) 2x [Quantité 1 pièce], Rajout pour capuchon àvis GL14 3,0 mm iØ, (Réf. de l’article 1129816) 2x [Quantité 1 pièce], Kit decompensation de pression (complet), (Réf. de l’article 1137799) 2x [Quantité1 pièce]
EJEMPLO DE PEDIDOEn este ejemplo, usted desea equipar dos frascos con un sistema de conexionesde 3 puertos. Además desea trabajar con tubos flexibles de dos diámetros diferentes (1,6 mm y 3 mm), así como con compensación de la presión. Para ello precisará de los siguientes componentes individuales: Cierre roscadoGL 45 3 puertos (nº art.: 1129751), 1x [un. venta: 2 unidades], Cierre roscadoGL 14 (nº art.: 1129814) 2x [un. venta: 2 unidades], Cierre roscado insertableGL14 1,6 mm en Ø, (nº art.: 1129815) 2x [un. venta: 1 unidad], Cierre roscadoinsertable GL14 3,0 mm en Ø, (nº art.: 1129816) 2x [un. venta: 1 unidad]Juego compensador de la presión completo) (nº art.: 1137799) 2x [un. venta:1 unidad]
Chemische und thermische Beständigkeit siehe Seite 142.Chemical and thermal properties see page 164.En ce qui concerne les propiétés chimiques et thermiques, se reporter autableau de la page 186.Ver propiedades químicas y térmicas en tabla pág. 208.
39
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Vierkant-Schraubflaschen,enghalsig mit Gewinde,aus Kalk-Soda-Glas,komplett mitAusgießring undStaubschutzkappe
Square bottles, narrow neck, with thread, made of soda-lime glass, completewith dust cap and pouring ring
Flacons carrés,à col étroit, à filetage,en verre sodocalcique,complets avec bague dedéversement et capu-chon de protection anti-poussière
Frasco cuadrangular,cuello estrecho, conrosca, en vidrio cal-soda, completo conanillo de vertido y tapade protección contra elpolvo
Best.-Nr. Inhalt Gewinde d h Originalpckg./StückCat. No. Capacity thread Stand. pack/quantity
ml mm mm
Klarglas/clear glass/verre clair/vidrio transparente23 810 24 5 100 321 49 119 3023 810 36 5 250 321 64 155 1023 810 44 5 500 321 77 186 1023 810 54 5 1 000 451 96 223 10Braunglas/amber glass/verre brun/vidrio topacio23 816 24 5 100 321 49 119 1023 816 36 5 250 321 64 155 1023 816 44 5 500 321 77 186 1023 816 54 5 1 000 451 96 223 10
KALK-SODA/SODA-LIME/SODO-CALCIQUE/CAL-SODA
KALK-SODA/SODA-LIME/SODO-CALCIQUE/CAL-SODA
1Hohe Form/highform/forme haute/forma alta
Vierkant-Schraub-flaschen, weithalsig mit Gewinde, aus Kalk-Soda-Glas, ohne Aus-gießring und Staub-schutzkappe
Square bottles, wideneck, with thread, madeof soda-lime glass,without cap and pouring ring
Flacons carrés, à collarge, à filetage, enverre sodo-calcique,sans bague de déverse-ment ni capuchon deprotection anti-poussière
Frasco cuadrangular,cuello ancho, con rosca,en vidrio cal-soda, sin anillo de vertido ytapa de protección contra el polvo
Best.-Nr. Inhalt Gewinde d h Originalpckg./StückCat. No. Capacity thread Stand. pack/quantity
ml mm mm
Klarglas/clear glass/verre clair/vidrio transparente23 820 24 100 321 49 109 3023 820 36 250 451 64 146 1023 820 44 500 541 77 173 1023 820 54 1 000 601 97 213 10Braunglas/amber glass/verre brun/vidrio topacio23 826 24 100 321 49 109 1023 826 36 250 451 64 146 1023 826 44 500 541 77 173 1023 826 54 1 000 541 97 213 10
1Kurze Form/short form/forme courte/forma baja Passende Kappe siehe Seite 40, 41.For spare caps see page 40, 41.Capuchons, voir page 40, 41.Tapas adecuadas: ver pág. 40, 41.
40
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Enghals-Schraubflascherund, aus Kalk-Soda-Glas, Braunglas, kom-plett mit Ausgießringund Staubschutzkappe
Round bottle, narrowneck, amber, with DIN-thread, made of soda-lime glass, completewith cap and pouringring
Flacons ronds, à colétroit, filetage en verresodo-calcique en verrebrun, complets avecbague de déversementet capuchon de protec-tion anti-poussière
Frasco redondo conrosca, cuello estrecho,en vidrio cal-soda, colortopacio, completo conanillo de vertido y tapade protección contra elpolvo
Best.-Nr. Inhalt Gewinde d h Originalpckg./StückCat. No. Capacity thread Stand. pack/quantity
ml mm mm
braun/amber/verre brun/vidrio topacio23 835 66 5 2 500 45 H 138 285 1
Passende Kappe/For spare caps/Capuchons/Tapas adecuadas 2930128, 2930228
KALK-SODA/SODA-LIME/SODO-CALCIQUE/CAL-SODA
Originalitätsverschlüsse(Kappen) aus PP, blaufür Vierkant-Schraub-flaschen, enghalsig
Tamper-evident PPscrew-caps, blue, fornarrow neck squarebottles
Capuchons avec bagued’inviolabilité en PP,bleu, pour flacons carrésà filetage à col étroit
Tapas con precinto, en PP, azul, para frascos cuadrangulares, cuelloestrecho
Best.-Nr. Gewinde d h Originalpckg./StückCat. No. thread Stand. pack/quantity
mm mm
29 301 19 32 H1 45 32 1029 301 28 45 H1 60 35 10
H1 = hohe Form/highform/formehaute/forma alta
41
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Best.-Nr. Gewinde d h Originalpckg./StückCat. No. thread Stand. pack/quantity
mm mm
29 302 19 32 H1 45 32 1029 302 28 45 H1 60 35 10
H1 = hohe Form/highform/formehaute/forma alta
Ventilkappe öffnet bei 0,1 bar ÜberdruckValve opens above 0,1 barLa soupape s’ouvre en cas de surpression de 0,1 barVálvula abre a partir de 0,1 bar
Sicherheitsverschlüsse(Kappen) aus PP, rotfür Vierkant-Schraub-flaschen, enghalsig, mitVentil
Safety, tamper-evidentPP screw-caps, red, for narrow neck squarebottles
Capuchons avec bagued’inviolabilité en PP,rouge, pour flacons car-rés à filetage à col étroit,avec soupape
Tapas de seguridad con precinto, en PP,rojo, para frascos cua-drangulares, cuelloestrecho, con válvula
Originalitätsverschlüsse(Kappen) aus PP, blaufür Vierkant-Schraub-flaschen, weithalsig
Tamper-evident PPscrew-caps, blue,for wide neck squarebottles
Capuchons avec bagued’inviolabilité en PP,bleu pour flacons carrésà filetage à col large
Tapas con precinto, enPP, azul para frascos cuadrangu-lares, cuello ancho
Best.-Nr. Gewinde d h Originalpckg./StückCat. No. thread Stand. pack/quantity
mm mm
29 303 19 321 44 23 1029 303 28 451 58 27 1029 303 32 541 69 29 1029 303 35 601 78 29 10
1kurze Form/short form/forme courte/forma baja
42
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
1Nicht nach DIN und ISO1Non-DIN, non-ISO size1Non conforme aux dimensions DIN et ISO1No según DIN e ISO
2 Nur solange Vorrat reicht2 Discontinued, available until stocks exhausted2 Uniquement jusqu’à épuisement du stock2 Sólo hasta agotar existencias
3Enghals-Flaschen mit NS, 1000 ml, sind auch als Bürettenflaschenverwendbar, siehe Seite 86.
3Bottles reagent, narrow neck, with neck 29/32, 1000 ml, can be used as burette bottle (reservoir bottle) see page 86.
3Les flacons à col étroit, 1000 ml, à RIN, sont également utilisables comme flacons à burette (réservoir), voir page 86.
3Los frascos de cuello estrecho con esmerilado NS, 1000 ml, se utilizan también como frascos para buretas, ver pág. 86.
Best.-Nr. Best.-Nr. Inhalt d h Hals Originalpckg./StückCat. No. Cat. No. Capacity Neck Stand. pack/quantityklar/clear braun/amber ml mm mm mm
Hals mit Normschliff, DIN 12 245/with standard ground joint, DIN 12 245avec rodage normalisé, DIN 12 245/con esmerilado normalizado, DIN 12 24521 164 141 21 167 14 1,2 25 36 64 12/21 1021 164 17 21 167 17 2 50 42 80 14/15 1021 164 24 21 167 24 2 100 52 96 14/15 1021 164 36 21 167 36 2 250 70 133 19/26 1021 164 44 21 167 44 2 500 86 164 24/29 1021 164 542 21 167 54 3 1 000 107 200 29/32 1021 164 63 21 167 63 2 2 000 134 248 29/32 1021 164 73 21 167 73 2 5 000 182 324 45/40 121 164 86 21 167 86 2 10 000 227 398 60/46 121 164 911 21 167 91 1,2 20 000 288 492 60/46 1
DURAN®-Enghals-StandflaschenDIN 12 035, ISO 4796mit Retrace Code
DURAN® bottles, reagent, narrow neckDIN 12 035, ISO 4796with Retrace Code
Flacons à col étroitDURAN®
DIN 12 035, ISO 4796avec Retrace Code
Frascos cuello estrechoDURAN®
DIN 12 035, ISO 4796con Retrace Code
1Nicht nach DIN1Non-DIN size1Non conforme aux dimensions DIN1No según DIN
DURAN®-Weithals-StandflaschenDIN 12 038mit Retrace Code
DURAN® bottles, reagent, wide neckDIN 12 038with Retrace Code
Flacons à col largeDURAN®
DIN 12 038avec Retrace Code
Frascos, cuello anchoDURAN®
DIN 12 038con Retrace Code
Best.-Nr. Best.-Nr. Inhalt d h Hals Originalpckg./StückCat. No. Cat. No. Capacity Neck Stand. pack/quantityklar/clear braun/amber ml mm mm mm
Hals mit Normschliff/with standard ground joint/avec rodage normalisée/con esmerilado normalizado21 184 17 21 187 17 2 50 44 79 24/20 1021 184 24 21 187 24 2 100 52 97 29/22 1021 184 36 21 187 36 2 250 70 132 34/35 1021 184 44 21 187 44 2 500 86 163 45/40 1021 184 54 21 187 54 2 1 000 107 201 60/46 1021 184 63 21 187 63 2 2 000 133 247 60/46 1021 184 731 21 187 73 1,2 5 000 182 358 85/55 121 184 861 21 187 86 1,2 10 000 229 443 85/55 121 184 911 21 187 91 1,2 20 000 290 570 85/55 1
1Nicht nach DIN1Non-DIN size1Non conforme aux dimensions DIN1No según DIN
DURAN®-Weithals-StandflaschenDIN 12 039mit Retrace Code
DURAN® bottles, reagent, wide neckDIN 12 039with Retrace Code
Flacons à col largeDURAN®
DIN 12 039avec Retrace Code
Frascos, cuello anchoDURAN®
DIN 12 039con Retrace Code
Best.-Nr. Best.-Nr. Inhalt d h Hals Originalpckg./StückCat. No. Cat. No. Capacity Neck Stand. pack/quantityklar/clear braun/amber ml mm mm mm
Hals mit Normschliff und NS-Glasdeckelstopfen/with standard ground joint and glass flat-head stopperavec rodage normalisé et bouchon en verre à tête plate/con esmerilado normalizado y tapón de vidrio21 185 17 21 188 17 50 44 79 24/20 1021 185 24 21 188 24 100 52 97 29/22 1021 185 36 21 188 36 250 70 132 34/35 1021 185 44 21 188 44 500 86 163 45/40 1021 185 54 21 188 54 1 000 107 201 60/46 1021 185 63 21 188 63 2 000 133 247 60/46 1021 185 731 21 188 73 1 5 000 182 358 85/55 121 185 861 21 188 86 1 10 000 229 443 85/55 121 185 911 21 188 91 1 20 000 290 570 85/55 1
Stopfen finden Sie auf Seite 45, 46.Stoppers see page 45, 46.Bouchons, voir page 45, 46.Tapones: ver página 45, 46.
2 Nur solange Vorrat reicht2 Discontinued, available until stocks exhausted2 Uniquement jusqu’à épuisement du stock2 Sólo hasta agotar existencias
43
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
1 Nicht nach DIN1 Non-DIN size1 Non conforme aux dimensions DIN1 No según DIN
DURAN®-Enghals-Stand-flaschen, DIN 12 036, ISO 4796 mit Retrace Code
DURAN® bottles, reagent,narrow neck, DIN 12036,ISO 4796with Retrace Code
Flacons à col étroit DURAN®,DIN 12 036, ISO 4796avec Retrace Code
Frascos cuello estrechoDURAN®, DIN 12 036, ISO 4796 con Retrace Code
Best.-Nr. Best.-Nr. Inhalt d h Hals Originalpckg./StückCat. No. Cat. No. Capacity Neck Stand. pack/quantityklar/clear braun/amber ml mm mm mm
Hals mit Normschliff und NS-Glasdeckelstopfen/with standard ground joint and glass flat-head stopperavec rodage normalisé et bouchon en verre à tête plate/con esmerilado normalizado y tapón de vidrio21 165 081 10 28 52 10/19 1021 165 141 21 168 14 1 25 36 64 12/21 1021 165 17 21 168 17 50 42 80 14/15 1021 165 24 21 168 24 100 52 96 14/15 1021 165 36 21 168 36 250 70 133 19/26 1021 165 44 21 168 44 500 86 164 24/29 1021 165 54 21 168 54 1 000 107 200 29/32 1021 165 63 21 168 63 2 000 134 248 29/32 1021 165 73 21 168 73 5 000 182 324 45/40 121 165 86 21 168 86 10 000 227 398 60/46 121 165 911 21 168 91 1 20 000 288 492 60/46 1
Stopfen finden Sie auf Seite 45, 46.Stoppers see page 45, 46.Bouchons, voir page 45, 46.Tapones: ver página 45, 46.
Stopfen finden Sie auf Seite 45, 46.Stoppers see page 45, 46.Bouchons, voir page 45, 46.Tapones: ver página 45, 46.
Best.-Nr. Best.-Nr. Inhalt d h Hals Originalpckg./StückCat. No. Cat. No. Capacity Neck Stand. pack/quantityklar/clear braun/amber ml mm mm mm
Hals mit Normschliff/with standard ground joint/à rodage normalisé/con esmerilado normalizado23 184 17 23 187 17 50 44 78 24/20 1023 184 24 23 187 24 100 52 97 29/22 1023 184 36 23 187 36 250 72 130 34/24 1023 184 44 23 187 44 500 89 165 45/27 1023 184 54 23 187 54 1 000 110 200 60/46 10
Weithals-Standflaschenaus Kalk-Soda-Glas, DIN 12 038
Bottles, reagent, wideneck made of soda-lime glass, DIN 12 038
Flacons à col largeen verre sodo-calcique,DIN 12 038
Frascos cuello anchoen vidrio cal-soda, DIN 12 038
KALK-SODA/SODA-LIME/SODO-CALCIQUE/CAL-SODA
Hinweis: Bei Verwendung von DURAN®-Glasstopfen auf Standflaschen aus Kalk-Soda-Glas können sich durchTemperaturdifferenzen über 30°C die Glasstopfen auf den Flaschenhälsen festsetzen.
Important note: When DURAN® glass stoppers are used with soda-lime glass reagent bottles, they may becomestuck in the neck if temperature differences exceed 30°C.
Remarque: Lors de l’utilisation de bouchons en DURAN® sur des flacons en verre sodo-calcique, ceux-ci peuvent se bloquer dans les cols des flacons en présence de différences de températures de plus de 30°C.
Importante: Cuando se utilizan tapones DURAN® en frascos de vidrio cal-soda, los tapones pueden quedar agarrotados en el cuello de los frascos si la diferencia de temperatura sobrepasa los 30°C.
Stopfen finden Sie auf Seite 45, 46.Stoppers see page 45, 46.Bouchons, voir page 45, 46.Tapones: ver página 45, 46.
Best.-Nr. Best.-Nr. Inhalt d h Hals Originalpckg./StückCat. No. Cat. No. Capacity Neck Stand. pack/quantityklar/clear braun/amber ml mm mm mm
Hals mit Normschliff und NS-Glasdeckelstopfen/with standard ground joint and glass flat-head stopperavec rodage normalisé et bouchon en verre à tête plate/con esmerilado normalizado y tapón de vidrio23 185 17 23 188 17 50 44 78 24/20 1023 185 24 23 188 24 100 52 97 29/22 1023 185 36 23 188 36 250 72 130 34/24 1023 185 44 23 188 44 500 89 165 45/27 1023 185 54 23 188 54 1 000 110 200 60/46 10
Weithals-Standflaschenaus Kalk-Soda-Glas,DIN 12039
Bottles, reagent, wideneck made of soda-limeglass, DIN 12 039
Flacons à col large enverre sodo-calcique,DIN 12 039
Frascos cuello anchoen vidrio cal-soda,DIN 12 039
Hinweis: Bei Verwendung von DURAN®-Glasstopfen auf Standflaschen aus Kalk-Soda-Glas können sich durchTemperaturdifferenzen über 30°C die Glasstopfen auf den Flaschenhälsen festsetzen.
Important note: When DURAN® glass stoppers are used with soda-lime glass reagent bottles, they may becomestuck in the neck if temperature differences exceed 30°C.
Remarque: Lors de l’utilisation de bouchons en DURAN® sur des flacons en verre sodo-calcique, ceux-ci peuvent se bloquer dans les cols des flacons en présence de différences de températures de plus de 30°C.
Importante: Cuando se utilizan tapones DURAN® en frascos de vidrio cal-soda, los tapones pueden quedar agarrotados en el cuello de los frascos si la diferencia de temperatura sobrepasa los 30°C.
KALK-SODA/SODA-LIME/SODO-CALCIQUE/CAL-SODA
44
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Best.-Nr. Best.-Nr. Inhalt d h Hals Originalpckg./StückCat. No. Cat. No. Capacity Neck Stand. pack/quantityklar/clear braun/amber ml mm mm mm
Hals mit Normschliff und NS-Glasstopfen/with standard ground joint and flat-head stopperavec rodage normalisé et bouchon en verre à RIN/con esmerilado normalizado y tapón de vidrio NS
23 165 171 23 168 17 50 44 78 14/15 1023 165 24 23 168 24 100 54 100 14/23 1023 165 36 23 168 36 250 72 130 19/26 1023 165 44 23 168 44 500 89 165 24/29 1023 165 54 23 168 54 1 000 110 200 29/32 10
Enghals-Standflaschenaus Kalk-Soda-Glas,DIN 12 036, ISO 4796
Bottles, reagent, narrow neck made ofsoda-lime glass,DIN 12 036, ISO 4796
Flacons à col étroiten verre sodo-calcique,DIN 12 036, ISO 4796
Frascos cuello estrechoen vidrio cal-soda,DIN 12 036, ISO 4796
Best.-Nr. Best.-Nr. Inhalt d h Hals Originalpckg./StückCat. No. Cat. No. Capacity Neck Stand. pack/quantityklar/clear braun/amber ml mm mm mm
Hals mit Normschliff/with standard ground joint/avec rodage normalisé/con esmerilado normalizado23 164 17 23 167 17 50 44 78 14/15 1023 164 24 23 167 24 100 54 100 14/23 1023 164 36 23 167 36 250 72 130 19/26 1023 164 44 23 167 44 500 89 165 24/29 1023 164 541 23 167 54 1 1 000 110 200 29/32 10
Flacons à col étroiten verre sodo-calcique,DIN 12 035
Frascos cuello estrechoen vidrio cal-soda,DIN 12 035
Enghals-Standflaschenaus Kalk-Soda-Glas,DIN 12 035
Bottles, reagent, narrowneck made of soda-lime glass, DIN 12 035
1Enghals-Flaschen mit NS, 1000 ml, sind auch als Bürettenflaschen verwendbar, siehe Seite 86.1Bottles reagent, narrow neck, with neck 29/32, 1000 ml, can be used as burette bottle (reservoir bottle) see page 86.1Les flacons à col étroit, 1000 ml, à RIN, sont également utilisables comme flacons à burette (réservoir), voir page 86.1Los frascos de cuello estrecho con esmerilado NS, 1000 ml, se utilizan también como frascos para buretas, ver pág. 86.
KALK-SODA/SODA-LIME/SODO-CALCIQUE/CAL-SODA
KALK-SODA/SODA-LIME/SODO-CALCIQUE/CAL-SODA
1Nur solange Vorrat reicht1Discontinued, available until stocks exhausted1Uniquement jusqu’à épuisement du stock1Sólo hasta agotar existencias
Hinweis: Bei Verwendung von DURAN®-Glasstopfen auf Standflaschen aus Kalk-Soda-Glas können sich durchTemperaturdifferenzen über 30°C die Glasstopfen auf den Flaschenhälsen festsetzen.
Important note: When DURAN® glass stoppers are used with soda-lime glass reagent bottles, they may becomestuck in the neck if temperature differences exceed 30°C.
Remarque: Lors de l’utilisation de bouchons en DURAN® sur des flacons en verre sodo-calcique, ceux-ci peuvent se bloquer dans les cols des flacons en présence de différences de températures de plus de 30°C.
Importante: Cuando se utilizan tapones DURAN® en frascos de vidrio cal-soda, los tapones pueden quedar agarrotados en el cuello de los frascos si la diferencia de temperatura sobrepasa los 30°C.
Hinweis: Bei Verwendung von DURAN®-Glasstopfen auf Standflaschen aus Kalk-Soda-Glas können sich durchTemperaturdifferenzen über 30°C die Glasstopfen auf den Flaschenhälsen festsetzen.
Important note: When DURAN® glass stoppers are used with soda-lime glass reagent bottles, they may becomestuck in the neck if temperature differences exceed 30°C.
Remarque: Lors de l’utilisation de bouchons en DURAN® sur des flacons en verre sodo-calcique, ceux-ci peuvent se bloquer dans les cols des flacons en présence de différences de températures de plus de 30°C.
Importante: Cuando se utilizan tapones DURAN® en frascos de vidrio cal-soda, los tapones pueden quedar agarrotados en el cuello de los frascos si la diferencia de temperatura sobrepasa los 30°C.
Best.-Nr. Best.-Nr. Kern Originalpckg./StückCat. No. Cat. No. NS Stand. pack/quantityDURAN® SBW Cone size
massiv/solid/massifs/macizo21 627 03 – 10/19 1021 627 04 – 12/21 10– 24 627 06 14/23 10– 24 627 07 19/26 10– 24 627 08 24/29 10halbhohl/semi-hollow/semi-creux/semi-hueco– 24 627 09 29/32 1021 627 11 – 34/35 121 627 12 – 45/40 1– 24 627 13 60/46 121 627 16 – 85/55 1
Best.-Nr. Nenngröße Originalpckg./StückCat. No. Nominal size Stand. pack/quantity
29 204 02 7/16 1029 204 03 10/19 1029 204 04 12/21 1029 204 06 14/23 1029 204 07 19/26 1029 204 08 24/29 1029 204 09 29/32 1029 204 111 34/35 129 204 121 45/40 129 204 131 60/46 129 204 161 85/55 1
1Nicht nach DIN1Non-DIN size1Non conforme aux dimensions DIN1No según DIN
2Chemische und thermische Beständigkeit siehe Seite 142.2Chemical and thermal properties see page 164.2Résistance chimique et thermique, voir page 186.2Para la resistencia química y térmica ver página 208.
45
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Deckelstopfen, braunmit Normschliff, achteckig, DIN 12 252
Glass flat-head stoppers, amber, with standard groundjoint, octagonal, DIN 12 252
Bouchons à tête plate,bruns, à rodage normalisé, octogonaux,DIN 12 252
Tapones planos, colortopacio, con esmeriladonormalizado, octogona-les, según DIN 12 252
Kunststoff-Stopfenaus Polyethylen2
DIN 12 254
Plastic stoppersin polyethylene2
DIN 12 254
Bouchons en matièreplastiqueen polyéthylène2
DIN 12 254
Tapones de plásticode polipropileno2
DIN 12 254
DURAN® Ausgießer mitKECK™ Kegelschliff-klammer, POM, KC
DURAN® pour out connection withKECK™ clip for conicaljoints, POM, KC
DURAN® bec de dever-sement avec pince KECK™pour rodages coniques,POM, KC
DURAN® conneccion paravertido con KECK™ clippara sujecciones conicosesmerialdas, POM, KC
Best.-Nr. Größe Originalpckg./StückCat. No. Size Stand. pack/quantity
NS
10 164 26 14/15 110 164 25 19/26 110 164 24 24/29 110 164 23 29/32 1
46
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Hinweis: Bei Verwendung von DURAN®-Glasstopfen auf Standflaschen aus Kalk-Soda-Glas können sich durchTemperaturdifferenzen über 30°C die Glasstopfen auf den Flaschenhälsen festsetzen.
Important note: When DURAN® glass stoppers are used with soda-lime glass reagent bottles, they may becomestuck in the neck if temperature differences exceed 30°C.
Remarque: Lors de l’utilisation de bouchons en DURAN® sur des flacons en verre sodo-calcique, ceux-ci peuvent se bloquer dans les cols des flacons en présence de différences de températures de plus de 30°C.
Importante: Cuando se utilizan tapones DURAN® en frascos de vidrio cal-soda, los tapones pueden quedar agarrotados en el cuello de los frascos si la diferencia de temperatura sobrepasa los 30°C.
Deckelstopfen mitNormschliff, achteckig,DIN 12 252
Glass flat-head stopperswith standard groundcone, octagonal, DIN 12 252
Bouchons à tête plateà rodage normalisé,octogonaux, DIN 12 252
Tapones planoscon esmerilado normali-zado, octogonales, según DIN 12 252
Best.-Nr. Best.-Nr. Kern Originalpckg./StückCat. No. Cat. No. NS Stand. pack/quantityDURAN® SBW Cone size
massiv/solid/massifs/macizo21 624 03 – 10/19 1021 624 04 – 12/21 10– 24 624 06 14/23 10– 24 624 07 19/26 10– 24 624 08 24/29 10halbhohl/semi-hollow/semi-creux/semi-hueco– 24 624 09 29/32 1021 624 11 – 34/35 121 624 12 – 45/40 1– 24 624 13 60/46 121 624 16 – 85/55 1
Deckelstopfenmit kurzem Normschliff,achteckig, DIN 12 252
Glass flat-head stopperswith short standardground joint, octagonal,DIN 12 252
Bouchons à tête plateà rodage normalisé court,octogonaux, DIN 12 252
Tapones planoscon esmerilado normali-zado corto, octogonales,según DIN 12 252
Best.-Nr. Kern Originalpckg./StückCat. No. NS Stand. pack/quantitySBW Cone size
massiv/solid/massifs/macizo24 625 06 14/15 1024 625 08 24/20 10halbhohl/semi-hollow/semi-creux/semi-hueco24 625 09 29/22 1024 625 11 34/24 124 625 12 45/27 1
DURAN®-Glasstopfenschräg geschliffen, fürStandflaschen (Sauerstoff-Flaschen nach Winkler)
DURAN® glass stoppersground conical, for reagentbottles (oxygen bottlesaccording to Winkler)
Bouchons en verreDURAN®, rodés en bise-au, pour flacons (flaconsà acide selon Winkler)
Tapones en vidrioDURAN®, esmerilados en ángulo, para frascos (frascos para oxígenosegún Winkler)
Best.-Nr. für NS Originalpckg./StückCat. No. for Stand. pack/quantity
ml
24 622 06 50 14/23 1024 622 07 100 19/26 10
47
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
DURAN®-Niveauflaschenmit Retrace Code
DURAN®-Levelling bottles with Retrace Code
Flacons à niveau en DURAN®
avec Retrace Code
Frascos de nivel DURAN®
con Retrace Code
Best.-Nr. Inhalt d h Originalpckg./StückCat. No. Capacity Stand. pack/quantity
ml mm mm
24 708 36 250 73 131 1024 708 44 500 89 162 1024 708 54 1 000 111 200 1
Säurekappenflaschenmit NS-Griffstopfen,Steilbrust, mit aus-tauschbarer Glaskappe
Acid bottles, completewith NS-pennyheadstopper, conicalshoulde-red, interchangeable cap
Flacons à acides àcapuchon, avec bouchon RIN à têteplate, avec épaulement
Frascos para ácidos,con tapón NS y capu-chón, intercambiable
Best.-Nr. Best.-Nr. Inhalt d h NS Originalpckg./StückCat. No. Cat. No. Capacity Joint Stand. pack/quantityklar/clear braun/amber ml mm mm St
21 275 24 21 275 24 6 100 55 145 19/17 1021 275 36 21 275 36 6 250 75 180 19/17 1021 275 44 21 275 44 6 500 82 220 24/20 1021 275 54 21 275 54 6 1 000 109 260 29/32 10
Einzelteile/Components/Eléments/Piezas de repuesto:Flasche/bottle/flacon/frasco 21 273 . . bzw. 21 273 . . 6Kappen/Caps/Capuchons/Tapas 21 274 . . bzw. 21 274 . . 6
Tropfflaschenmit austauschbarerKlarglas-Pipette NS, ausKalk-Soda-Glas komplettmit Gummihütchen
Dropping bottleswith interchangeablepipette NS, soda-limeglass, complete withrubber teats
Flacon compte gouttesà pipette RIN interchan-geable en verre sodo-calcique, complets, avecpetite poire en caout-chouc
Frascos cuentagotascon pipeta NS intercam-biable, en vidrio cal-soda, completo concapuchón de goma
Best.-Nr. Best.-Nr. Inhalt h Originalpckg./StückCat. No. Cat. No. Capacity Stand. pack/quantityklar/clear braun/amber ml mm
23 270 17 23 270 17 6 50 79 1023 270 24 23 270 24 6 100 105 10
Gummihütchen, transparent, Best.-Nr. 2920001 (Originalpackung 10 St.)Rubber teats, transparent, Cat. No. 2920001 (Quantity 10)Capuchons en caoutchouc, transparent, No d’article 2920001 (10 pièces)Capuchones de goma transparente, No ref. 2920001 (10 piezas)
Ersatzpipetten, Klarglas, Best.-Nr. 23271 . . (Originalpackung 10 St.)Spare pipettes, clear glass, Cat. No. 23271 . . (Quantity 10)Pipettes de rechange, verre clair, No d’article 23271 . . (10 pièces)Pipetas de recambio, vidrio transparente, No ref. 23271 . . (10 piezas)
*DURAN®
*
48
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
Best.-Nr. Inhalt d h Bodentubus Originalpckg./StückCat. No. Capacity Tubulature Stand. pack/quantity
ml mm mm NS
24 701 44 500 89 165 19/26 1024 701 54 1 000 110 200 19/26 1024 701 63 2 000 136 245 19/26 1024 701 73 5 000 182 320 29/32 124 701 86 10 000 234 398 29/32 124 701 91 20 000 300 492 29/32 1
Best.-Nr. Inhalt d h Hals Bodentubus Originalpckg./StückCat. No. Capacity Neck Tubulature Stand. pack/quantity
ml mm mm mm NS
24 702 44 500 89 165 24/29 19/26 1024 702 54 1 000 110 200 29/32 19/26 1024 702 63 2 000 136 245 29/32 19/26 1024 702 73 5 000 182 320 45/40 29/32 124 702 86 10 000 234 398 60/46 29/32 124 702 91 20 000 300 492 60/46 29/32 1
Ablaufhahn NS fürStutzenflaschen
Stopcock NS for aspirator bottles
Robinet d’écoulementRIN pour flacons àtubulure
Llave NS para frascos con tubuladura
Best.-Nr. für Inhalt NS Originalpckg./StückCat. No. for capacity Stand. pack/quantity
ml
24 148 03 500– 2 000 19/26 124 148 04 5 000–20 000 29/32 1
Flacons à tubulure(flacons à décanter),tubulure de fond avecRIN, col non rodé, sansbouchon, EN ISO 4796-3avec Retrace Code
Frascos con tubuladura (frascos de decantación)tubuladura en la basecon esmerilado NS,cuello sin esmerilar, sin tapón, EN ISO 4796-3con Retrace Code
Stutzenflaschen(Abklärflaschen),Bodentubus mit NS,Hals ungeschliffen, ohne Stopfen, EN ISO 4796-3mit Retrace Code
Aspirator bottlesNS tubulated, withoutstoppers, EN ISO 4796-3with Retrace Code
Stutzenflaschen(Abklärflaschen)Bodentubus mit NS,komplett mit NS-Hahnund NS-Stopfen, EN ISO 4796-3mit Retrace Code
Aspirator bottlesNS tubulated, EN ISO 4796-3, comple-te with NS stopcock andNS stopperswith Retrace Code
Flacons à tubulure (flacons à décanter)tubulure de fond avecRIN, complets avec robinet RIN et bouchonRIN, EN ISO 4796-3avec Retrace Code
Frascos con tubuladura(frascos de decantación)tubuladura con esmerila-do NS, completo conllave NS, EN ISO 4796-3con Retrace Code
h h
d d
2 l
3 l
4 l
1 l
AP
PR
OX
. V
OL
.
5000 ml
P000000Retrace Code
49
2 | SCHOTT DURAN® FLASCHEN | BOTTLES
StutzenflaschenHals mit DIN-GewindeGL 45, Bodentubus GL 32, komplett mitSchraubverbindungs-kappe, Silikondichtung,Ablaufhahn und PTFE-Spindelmit Retrace Code
Aspirator bottlesneck with GL 45 DINscrewthread, completewith GL 32 tubulature,screwthread adaptercoupling, silicone gasketand draincock with PTFEspindlewith Retrace Code
Flacons à tubulurecol avec filetage DIN GL 45, tubulure de fondGL 32, complets aveccapuchon de raccorde-ment à visser, joint en sili-cone, robinet d’écoule-ment et pointeau en PTFEavec Retrace Code
Frascos con tubuladuracuello con rosca DIN GL45, tubuladura GL 32 enla base, completo concaperuza de unión roscada, junta de siliconay llave con punzón de teflóncon Retrace Code
Best.-Nr. Inhalt DIN-Gewinde d h Originalpckg./StückCat. No. Capacity DIN thread Stand. pack/quantity
ml GL mm mm
24 703 54 1000 45 101 225 124 703 63 2000 45 136 262 124 703 73 5000 45 182 330 124 703 86 10 000 45 230 410 1
Ersatzkappe siehe Seite 132, 133.For spare cap see page 132, 133.Pour les capuchons à visser, voir page 132, 133.Para tapas roscadas véase página 132, 133.
Ablaufhahn fürStutzenflaschenmit PTFE-Spindel für Gewinde GL 32
Draincockwith PTFE spindle for GL32 DIN screwthread foraspirator bottle
Robinet d’écoulement pour flacons à tubulureavec pointeau en PTFE, pour filetage GL 32
Llaves para frascos con tubuladuracon punzón de teflón, para rosca GL 32
Best.-Nr. Bohrung für Inhalt Originalpckg./StückCat. No. hole for capacity Stand. pack/quantity
mm ml
24 147 03 6 1 000 + 2 000 124 147 04 8 5 000 + 10 000 1
Silikondichtungfür GL 32
Silicone gasketfor GL 32
Joint en siliconepour GL 32
Juntas de siliconapara GL 32
Best.-Nr. für ID für Inhalt Originalpckg./StückCat. No. for ID for capacity Stand. pack/quantity
mm ml
29 236 10 10 1 000 + 2 000 1029 236 12 12 5 000 + 10 000 10