10 21 13/GLO BuyLine 0081
-
Upload
kingdavidlee -
Category
Documents
-
view
217 -
download
0
Transcript of 10 21 13/GLO BuyLine 0081
-
8/14/2019 10 21 13/GLO BuyLine 0081
1/12
10
Bu
-
8/14/2019 10 21 13/GLO BuyLine 0081
2/12
-
8/14/2019 10 21 13/GLO BuyLine 0081
3/12
Global Materials
Phenolic - Black Core
Holds up even under seve
moisture conditions from
pools and saunas, or when
maintenance includes hos
toilet partitions. Ideal for
vandalism is a problem. Icolor spectrum all with
edges. Available in all sty
Plastic Laminate
Combining design flexibility,
aesthetic appeal and economy in an
ideal finishthe proven benefits of
high pressure laminates are built in
featuring a smooth surface
highly resistant to scratches, grease,and mars. Offered in a complement
of designer colors. Available in
all styles.
Polymer (HDPE)
Polymer (HDPE) is highly resistant
to stains, common acids and cleaning
agents as well as to moisture. The
ideal choice for busy public facilities
never needs painting and will not
easily dent or chip. Available in awide variety of contemporary colors.
Floor Anchored/ Overhead Braced,
Ceiling Hung and Floor and Ceiling
Anchored styles.
-
8/14/2019 10 21 13/GLO BuyLine 0081
4/12
GLOBAL polymer toilet partitions are
the ideal choice for high-traffic areas.
They are environmentally safe and
sanitary, never need painting, and will
not easily dent or chip. It is the material
of choice for low maintenance.
HDPE solid polymer is water resistant
and unaffected by high humidity or
corrosive environments and cannot
delaminate. Most commercial cleaningagents will not damage the surface.
GLOBAL HDPE polymer has
homogeneous color and material
compound throughout. An aluminum
heat sink strip is applied to the bottom
edge of all doors and panels as standard.
Global Polymer (HDPE)
-
8/14/2019 10 21 13/GLO BuyLine 0081
5/12
Global Plastic Laminate
GLOBAL plastic laminate partitions combine
design flexibility with affordable cost. The high
pressure laminate finishes, bonded under pressure
to a solid impact-resistant particle board core, meet
or exceed all NEMAstandards. Edge banding of
all components prior to face lamination ensures
optimum water runoff and durability.
GLOBAL plastic laminate is available in all four
installation styles and a variety of designer colors to
complement vanities and counter tops. They are
the finish of choice for commercial and institutional
installations where aesthetics are essential.
Color Selection Guide
1010Mission White
1020Antique White
4000Almond
4010Sand
4410Natural Canvas
4300Lime Stone
4583Desert Zephyr
1130Neutral Glace
-
8/14/2019 10 21 13/GLO BuyLine 0081
6/12
Global Phenolic - Black Core
GLOBAL phenolic partitions are the material
of choice where durability and strength arerequired. These partitions are fabricated to
stand the test of time. The dense components,
combined with stainless steel brackets and
fasteners, stand up to the most extreme
conditions of moisture and humidity.
Phenolic is impact, water, and corrosion
resistant, and does not support bacteria.
The phenolic partition is decoratively faced
on both sides as an integral part of a resin-
impregnated kraft paper core. The surface
and core sheets are fused at high temperature
and pressure. In addition to strength and
serviceability, a wide range of colors
provides limitless design flexibility.
GLOBAL phenolic partitions are available inall four installation styles.
-
8/14/2019 10 21 13/GLO BuyLine 0081
7/12
GLOBAL Color-Thru Phenolic provides
another reason to choose phenolic. True to itsname, Color-Thru is made with surface color
through and through, to help resist damage;
and even discourage vandalism and abuse.
Along with phenolic strength, durability and
low maintenance requirement, Color-Thru
Phenolic is impact, scratch and graffiti
resistant; also it has excellent screw holding
power and all the advantages of traditionalPhenolic performance. Costs no more than
regular Global phenolic compartments.
Same construction features and hardware as
Global Black-Core Phenolic.
Color Selection Guide
COLOR-THRU: 10 W ORKING DAYS Any standard color - in all four styles.
Global Phenolic - Color-Thru
-
8/14/2019 10 21 13/GLO BuyLine 0081
8/12
Global Stainless Steel
GLOBAL stainless steel
toilet partitions are virtually
indestructible and retain their
gleaming beauty indefinitely.
These units combine the strength
of #304 stainless steel with a
#4 satin finish or textured
finish, formed and bonded to a
honeycomb core. The face sheets
are held rigid and permanently
in place by an interlockingstrip welded at each corner.
GLOBAL stainless steel
components are impervious
to just about any substance.
Even scratches caused by
deliberate vandalism can be
removed by buffing. Theelegance of GLOBAL stainless
steel components complements
any design scheme, either
in new construction or for
-
8/14/2019 10 21 13/GLO BuyLine 0081
9/12
Global powder coated steel
partitions provide high-tech
quality at an economical price.
The powder coated finish is
electrostatically applied over
stretcher level quality steel.
The finish is highly resistant
to wear, fading, staining,
scratching and scuffing. It is
easily cleaned with mild soap
and wiped dry.
The steel is electrogalvanized
to protect against corrosion
and provide a proper base for
the finish. The face sheets are
held rigid and permanently in
place by an interlocking strip
welded at each corner. Thecore is cellular honeycomb
which provides strong
construction and maximum
sound attenuation.
Global Powder Coated
-
8/14/2019 10 21 13/GLO BuyLine 0081
10/12
PHENOLIC - COLOR-THRU
Solid core, comprised of multiplkraft paper, phenolic resin and decsheets, all of the same color, shtogether under high temperature a
a. Floor Anchored Overhead Braceb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors shall be constructed of 3/4phenolic.Panels shall be constructed of 1/phenolic.
Pilasters shall be constructed of 3Pilaster shall include a mountcomprising a 1/4" thick x 3/4" widsteel base bar with 3/8" steel lag mounting bar shall be secured to structure with two 3/8" cadmiumanchoring studs.
a. All exposed door hardware shal
aluminum and shall be as noted:1. Heavy-duty die cast vault hinge brushed finish and have wrap-aroThe gravity acting cams shall be from 3/4" diameter nylon roddiameter stainless steel pin. Hingthrough-bolted onto doors and pilstainless steel theft resistant thr
PLASTIC LAMI NATE
High-pressure decorative plasticlaminate .050" (1.2 mm) thick bondedwith non-toxic water resistantadhesive under high pressure to 45-lb
(20.4-kg) density resin impregnatedparticle-board.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors and panels finished thickness to be 1".Doors to be recessed to accept hinges withinthe plane of the door and yield bi-directionaloperation about an axis within the plane ofthe door.
Pilasters shall be 1-1/4" thick. Pilastersshall include a mounting systemcomprising a 1/4" thick x 1" wide steelbase bar with 3/8" steel lag bolts. Eachmounting bar shall be secured to thebuilding structure with two 3/8"cadmium-plated self-anchoring studs.
a. Door hardware shall be chromium
plated die cast Zamac on all exposedparts and shall be as noted:1. Hinges shall be recessed into doorand saddle mounted on the adjacentpilaster. Hinges shall be adjustable forpartial opening or self-closing of doors.2. Slide latches shall be mounted at themid-point of t he door Keepers shall be
PHENOLIC - BLACK CORE
Solid core with decorative laminate on bothsides. Materi al has multiple layers of resin-impregnated kraft and surface sheets fusedat high temperatures and pressure. Al l edgesare black.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors shall be constructed of 3/4" black corephenolic.Panels shall be constructed of 1/2" black corephenolic.
Pilasters shall be constructed of 3/4" phenolicPilaster shall include a mounting systemcomprising a 1/4" thick x 3/4" wide stainlesssteel base bar with 3/8" steel lag bolts. Eachmounting bar shall be secured to the buildingstructure with two 3/8" cadmium plated selfanchoring studs.
a. All exposed door hardware shall be die
cast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shall havea brushed finish and have wrap-aroundflanges. The gravity acting cams shall beconstructed from 3/4" diameter nylon rod and3/8" diameter stainless steel pin. Hingesshall be through-bolted onto doors andpilasters using stainless steel t heft resistant
M ATERIALINFORMATION
TYPESAVAILABLE:
DOORS AN D
PANELS:
PILASTERS:
HARDWARE:
SpecificationsPOLYM ER (HDPE)
High-density polyethylene (HDPE) resinswith homogeneous color throughout.
a. Floor Anchored Overhead Bracedb. Floor and Ceiling Anchoredc. Ceiling Hung
Doors and panels to be 1" thick and 55"high and have an extruded aluminumheat sink strip attached to the loweredge.
Pilasters shall be 1" thick. Pilaster shallinclude a mounting system comprising a1/4" thick x 1" wide stainless steel basebar with 3/8" steel lag bolts. Eachmounting bar shall be secured to thebuilding structure with two 3/8"cadmium-plated self anchoring studs.
a. All exposed door hardware shall be die
cast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shallhave a brushed finish and have wrap-around flanges. The gravity acting camsshall be constructed from 3/4" diameternylon rod and 3/8" diameter stainlesssteel pin. Hinges shall be through-boltedonto doors and pilasters using stainless
-
8/14/2019 10 21 13/GLO BuyLine 0081
11/12
M ATERIALINFORMATION
TYPESAVAILABLE:
DOORS ANDPANELS:
PILASTERS:
STAINLESS STEEL
Stretcher-leveled quality type 304 stainless steel, formed and bonded underpressure with a non-toxic adhesive to a resin-impregnated, sound-deadening,honeycomb core.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors and panels shall be 1" thick, constructed of two sheets of 22 gaugestainless steel. The perimeter shall be sealed with a 22 gauge interlockingmolding. Molding corners shall be welded to each other and to face sheetsand ground smooth to form a rigid frame around the component.
a. Floor Anchored Overhead Braced Pilasters shall be 1-1/4" thick constructedof tw o sheets of 22 gauge stainless steel. Vertical edges shall be sealed with22 gauge interlocking molding. An inverted stirrup shall be welded within thebase of each pilaster with a jack bolt for leveling during installation andpermanent load support. "L" brackets shall be coupled to the stirrup bracketand floor for full range adjustment.b. Floor Anchored Pilasters shall be 1-1/ 4" thi ck, constructed of tw o sheets of18 gauge stainless steel. Vertical and top edges shall be sealed with 22gauge interlocking molding. An 11 gauge slotted stirrup bracket shall bewelded in the base of each pilaster. Two 3/ 8" diameter cadmium-platedstuds anchor the mounting bracket to a concrete floor.c. Ceiling Hung Pilasters shall be 1-1/4" thick, constructed of two sheets of18 gauge stainless steel. Vertical and bottom edges shall be sealed with 22gauge stainless steel interlocking molding. An 11 gauge slotted stirrupbracket shall be welded to the top of each pilaster. Two 3/8" diametercadmium-plated studs anchor the mounting bracket to overhead structuralsteel members.d Fl d C ili A h d Pil t h ll b 1 1/4" thi k t t d f
SpecificationsPOWDER COATED
Stretcher-leveled quality galvannealed steel, formed and bondedpressure with a non-toxic adhesive to a resin-impregnated, deadening honeycomb core. Hybrid resin powder w hich is electrost
charged, is sprayed onto the surface then heated fused in a curininto a smooth coating.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors and panels shall be 1" t hick, constructed of tw o sheets of 22steel. The perimeter shall be sealed with a 22 gauge interlocking mMolding corners shall be welded to each other and to face sheeground smooth to form a ri gid frame around the component.
a. Floor Anchored Overhead Braced Pilasters shall be 1-14" thick consof tw o sheets of 22 gauge steel. Vertical edges shall be sealed wgauge interlocking molding. An inverted stirrup shall be welded witbase of each pilaster with a jack bolt for leveling during installatipermanent load support. "L" brackets shall be coupled to the bracket and fl oor for full range adjustment.b. Floor Anchored Pilasters shall be 1-14" thick, constructed of two sh18 gauge steel. Vertical edges shall be sealed with 22 gauge intermolding. The top of each pilaster shall be sealed with 22 interlocking molding. A 11 gauge slotted sti rrup bracket shall be wethe base of each pilaster. Two 38" diameter cadmium-plated self anstuds anchor the mounting bracket to a concrete floor.c. Ceiling Hung Pilasters shall be 1-14" thick, constructed of two sh18 gauge steel. Vertical and bottom edges shall be sealed with 22interlocking molding. A 11 gauge slotted stirrup bracket shall be to the top of each pilaster. Two 38" diameter studs anchor the mobracket to overhead structural steel members.d Fl d C ili A h d Pil t h ll b 1 1 " thi k t
-
8/14/2019 10 21 13/GLO BuyLine 0081
12/12
Global Privacy and Urinal
Screens are available in
three, easy to maintainmounting configurations and
are offered in six materials:
polymer, plastic laminate,
phenolic-black core,
phenolic-color-thru, stainless
steel and powder coated.
Construction styles include
wall hung, floor anchoredand post-to-ceiling screens.
Wall Hung Screens
Standard sizes:
24" x 42", 18" x 42", 12" x 42".
Floor Anchored Screens
6" wide pil asters,
58" high panels by depth
required.
Post-to-Ceiling Screens
Post 1-3/4" sq. x 10' satin
finish aluminum.
Global Privacy and Urinal Screens