1 Pertemuan 24 Mengatasi Kelemahan Akuntansi Biaya Konvensional Matakuliah: J0274/Akuntansi...
-
date post
20-Dec-2015 -
Category
Documents
-
view
229 -
download
3
Transcript of 1 Pertemuan 24 Mengatasi Kelemahan Akuntansi Biaya Konvensional Matakuliah: J0274/Akuntansi...
1
Pertemuan 24Mengatasi Kelemahan Akuntansi Biaya
Konvensional
Matakuliah : J0274/Akuntansi Manajemen
Tahun : 2005
Versi : 01/00
2
Learning Outcomes
Pada akhir pertemuan ini, diharapkan mahasiswa
akan mampu :
• Memahami alternatif untuk mengatasi keterbatasan informasi akuntansi konvensional
3
Outline Materi
• Karakteristik lingkungan produksi dimana informasi akuntansi konvensional masih akurat
• Ilustrasi kasus
4
Volume, Size, and Complexity
• The traditional volume-based costing system may provide reasonably accurate costs when a firm’s operation possess the following characteristics:
1. Few and very similar products and service lines
2. Relatively low overhead expenses3. Homogeneous conversion processes for all
products or services4. Similar distribution channels, customer
demands, and customers
5
Volume, Size, and Complexity
• A traditional volume-based overhead costing system, whether plantwide or departmental, often leads to inaccurate product costs (especially for firms with complex manufacturing operations)
• Distortions of volume-based overhead cost systems increase as product diversity increases
• Inaccurate cost information can lead to undesirable strategic results, such as wrong product-line decisions, unrealistic pricing, and ineffective resource allocations
6
Problems With Simple Cost Accounting Systems: The Cooper Pen Company
Example
• Cooper Pen had been the low-cost producer of blue pens and black pens, with profit margins exceeding 20% of sales
• Several years ago Cooper Pen expanded their business by extending their product line into products with premium selling prices
7
The Cooper Pen Company Example
• Five years ago red pens were introduced– The same basic production technology– Could be sold at a price that was 3% higher than for
blue and black pens
• Last year purple pens were added– Could be sold at a 10% price premium
• The controller of Cooper Pen was disappointed with the most recent quarter’s financial results– Overall profitability for all four together had decreased– The red and purple pens, however, were more profitable
than the blue and black pens
8
Total Profitability by Product
Blue Black Red Purple Total
Units 50,000 40,000 9,000 1,000 100,000
Price $ 4.50 $ 4.50 $ 4.65 $ 4.95
Sales $225,000 $180,000 $41,850 $4,950 $451,800
Material 75,000 60,000 14,040 1,650 150,690
Labor 30,000 24,000 5,400 600 60,000Overhead 90,000 72,000 16,200 1,800 180,000Total Mfg. Expenses
195,000 156,000 35,640 4,050 390,690
Gross Margin
$ 30,000 $ 24,000 $ 6,210 $ 900 $ 61,110
G.M. % 13.3% 13.3% 14.8% 18.2% 13.5%
9
Concern at Cooper Pen
• The controller of Cooper Pen wondered whether the company should continue to deemphasize the blue and black commodity products and keep introducing new specialty colored pens
• Cooper’s manufacturing manager commented on how the introduction of colored pens had changed the production environment:– Everything ran smoothly when producing just
blue and black pens in long production runs– Difficulties started when the red pens were
introduced and required more changeovers
10
Changes Caused by New Pens (1 of 2)
• Making black ink was simple; there was not even a need to clean out the residual blue ink from the previous run if enough black ink was dumped in to cover it up
• Red required Cooper to stop production, empty the vats, clean out all remnants of the previous color, and then start the production of the red ink– Even small traces of the blue or black ink
created quality problems• The ink for the purple pens also had demanding
specifications, though not quite as demanding as the red ink
11
Changes Caused by New Pens (2 of 2)
• Cooper Pens was also spending more time on purchasing and scheduling activities and keeping track of existing, backlogged, and future orders
• Cooper’s manufacturing manager was concerned about rumors that new colors may be introduced in the near future– He did not think they had any more capability to
handle additional confusion and complexity in the operations
• Last year’s new computer system helped to reduce some of the confusion
12
Pen Production At Cooper’s
• Pen production at the factory involved:– Preparing and mixing the ink for the different color pens– Inserting the ink into the pens in a semiautomated
process– Packing and shipping the pens in a manual stage
• Each product had a:– Bill of materials that identified the quantity and cost of
direct materials required for the product– Routing sheet that identified the sequence of
operations required for each operating step• This information was used to calculate the labor
expenses for each of the four products– From this information, it was easy to calculate the direct
materials costs and direct labor costs for each color pen
13
Cooper’s Indirect Cost Allocation
• Because it was a small company and historically had produced only a narrow range of products, Cooper used a simple costing system– All the plant’s indirect expenses were aggregated at
the plant level and allocated to products based on each product’s direct labor cost
– Currently the cost system’s overhead burden rate was 300% of direct labor cost
– Before the new specialty products were introduced, the overhead rate was only 200% of direct labor cost
14
Cooper Pen’s Cost System
• Cooper’s management accountants designed the system years ago when:– Production operations were mostly manual– Total indirect costs were less than direct labor costs– Cooper’s two products had similar production
volumes and batch sizes
• Given the high cost of measuring and recording information, the accountants at the time judged correctly that a complex costing system would cost more to operate than the benefits it would provide
15
A Changed Production Environment
• Direct labor costs have decreased and indirect expenses have increased as a result of automation
• As custom low-volume products, such as red and purple pens were added, Cooper needed:– More scheduling– More setups– More quality control personnel– A computer to track orders and product specifications
16
An Outdated Cost System
• Cooper operates with only a single cost center, the plant– Most complex companies use many cost centers for
cost accumulation
• Even if Cooper Pen used multiple production and service department cost centers, it could still encounter severe distortions in its reported product costs:– In an environment of high product variety, using only
unit-level drivers (such as direct labor costs) to allocate overhead costs to products could lead to product cost distortion
17
Reason for Cost Distortions (1 of 3)
– schedule machine and production runs
– perform setups– inspect produced items after
setup– move materials– ship orders– expedite orders– rework defective items
– design new products– improve existing products– negotiate with vendors– schedule materials receipts– order, receive, and inspect
incoming materials and parts– update and maintain the much
larger computer-based information system
• A complex factory has a much larger production support staff because it requires more people to:
• A complex factory generally also operates with higher levels of idle time, setup time, overtime, inventory, rework, and scrap
18
Reason for Cost Distortions (2 of 3)
• Because the factory has the same physical output, it has roughly the same cost of materials (ignoring the slightly higher acquisition costs for smaller orders of specialty colors and other materials)
• Because all pens are about the same complexity, each pen would require the same number of direct labor hours and machine hours to produce
• The Cooper Pen Company factory has about the same property taxes, security costs, and heating bills as before, but it has much higher indirect and support costs because of its more varied product mix and complex production tasks
19
Reason for Cost Distortions (3 of 3)
• On a per unit basis, high-volume standard blue and black pens require about the same amount of direct labor costs (the allocation basis) as the low volume color pens
• Therefore, the traditional costing system would report essentially identical product costs for all products, standard and specialty, irrespective of their relative production volumes– This would hold true even if the cost system had
multiple production and service cost centers• Clearly, however, considerably more indirect and support
resources are required on a per-unit basis for the low-volume, newly designed products than for the high-volume, standard blue and black pens
20
Activity-Based Cost Systems
• Activity-based cost systems have been developed to eliminate this major source of cost distortion
• Activity-based cost (ABC) management systems use a simple two-stage approach similar to but more general than traditional cost systems
• The next slide compares the essential elements of the two systems
21
Traditional v. ABC System
• Traditional:– Uses actual departments or
cost centers for accumulating and redistributing costs
– Asks how much of an allocation basis (usually based on volume) is used by the production department
– Service department expenses are allocated to a production department based on the ratio of the allocation basis used by the production department
• ABC:– Uses activities, for
accumulating costs and redistributing costs
– Asks what activities are being performed by the resources of the service department
– Resource expenses are assigned to activities based on how much of the resource is required or used to perform the activities
22
Tracing Costs to Activities
• Here’s how an ABC system works, using the Cooper Pen Company as an example:– The controller started an analysis of indirect
expenses, beginning with indirect labor– The controller interviewed department heads in
charge of indirect labor and found that the people in these departments performed three main activities
23
Indirect Labor Activities (1 of 2)
• 50% of indirect labor was involved in what the controller called “handle production runs” – Scheduling production orders– Purchasing, preparing, and releasing materials– Inspecting the first few units produced each time the
process was changed to a new-colored pen
• 40% of indirect labor actually performed the physical changeover from one color pen to another, an activity that she labeled “perform setups”– Change to Black pens takes 2.4 hours– Change to Red or Purple pens takes 5.6 hours
24
Indirect Labor Activities (2 of 2)
• 10% of the time was spent on activities the controller called “support products:” maintaining records on the four products, such as:– Making up the bill of materials and routing information– Monitoring and maintaining a minimum supply of raw
materials and finished goods inventory for each product
– Improving the production processes– Performing engineering changes for the products
25
First Steps in Design of An ABC System
• As she conducted the interviews, the controller was performing the first two steps for designing an activity-based cost system:
1) Develop the activity dictionary: the list of major activities performed by both the factory’s human and physical resources
2) Obtain sufficient information to assign resource expenses to each activity in the activity dictionary (50% of indirect labor to “handle production runs,” 40% to “perform setups,” and 10% to “support products”)
26
Computer System Expenses (1 of 2)
• The controller next turned her attention to the $30,000 of expenses needed to operate the company’s computer system and interviewed the manager of the data center and the manager of the management information system department
• 20% of computer expenses should be assigned to “support products,” an activity already defined in her activity dictionary, because it was used to keep records on the four products, including:– Production process– Associated engineering change notice information
27
Computer System Expenses (2 of 2)
• About 80% of the computer resource was involved in the production run activity and seemed to relate well to the “handle production runs” activity already defined:– Schedule production runs in the factory– Order and pay for the materials required in each
production run– Since each production run was made for a particular
customer, also included in this activity was the computer time required to:
• Prepare shipping documents• Invoice a customer• Collect from a customer
28
Other Overhead Expenses
• There were three remaining categories of overhead expense:– Machine depreciation– Machine maintenance– Energy to operate the machines
• These expenses were incurred to supply machine capacity to produce the pens:– A practical capability of 10,000 hours of productive
time could be supplied to pen production
• The controller labeled this production activity “run machines”
29
Identifying Cost Hierarchies
• The controller noted that even though she had defined only four activities for Cooper’s indirect costs, they represented the three different levels of the manufacturing cost hierarchy:
PRODUCT SUSTAININGSUPPORT PRODUCTS
BATCH LEVELSETUP MACHINES
BATCH LEVELHANDLE PRODUCTION RUNS
UNIT LEVELRUN MACHINES
COST HIERARCHYACTIVITY
• Finding at least one activity for each hierarchy level gave her confidence that the complexity of the manufacturing process could be represented well enough by the activity-based cost system
30
Benefits from Half an ABC System
• The ABC model was only half completed (costs have not yet been driven down to products), yet it had already provided some important insights:– Now the controller could see why Cooper Pens was
incurring expenditures for resources instead of seeing categories of expenses
– In particular she saw how expensive activities such as handling production runs and setting up machines were
• The ABC model shifted the focus from what the money was being spent on (labor, equipment, supplies) to what the resources acquired by spending were actually doing
31
From ABC to ABM (1 of 2)
• In the past, industrial engineers at Cooper Pen had studied labor and materials usage closely:– These had been the high cost resources– They were also the primary cost categories featured by
Cooper’s traditional cost system– The high overhead rate on direct labor seemed to
amplify any benefits from direct labor cost savings that the industrial engineers could achieve
32
From ABC to ABM (2 of 2)
• It would be worthwhile to have industrial engineers study the way Cooper handled and scheduled production runs and how the employees set up machines to uncover new opportunities for cost reduction and process improvement projects– This is an example of operational activity-based
management (ABM), where managers use information collected by the ABC system at the activity level to identify opportunities for reducing costs in indirect and support activities
33
Tracing Costs From Activities To Products
• The controller next turned her attention to understanding the demands for these activities by the four different products
• By understanding how products use activities, she would be able to relate the cost of performing activities to individual products
34
Activity Cost Drivers• Activity cost drivers represent the quantity of activities
used to produce individual products• The controller identified the following activity cost drivers
for the activities in her activity dictionary:
ACTIVITY ACTIVITY COST DRIVER
HANDLE PRODUCTION RUNS PRODUCTION RUNS
SET UP MACHINES SETUP HOURS
SUPPORT PRODUCTS NUMBER OF PRODUCTS
RUN MACHINES MACHINE HOURS
PROVIDE FRINGE BENEFITS LABOR DOLLARS
35
Completing the ABC Model (1 of 2)
• Once the activity cost drivers had been determined, the controller obtained quantitative information on:
– The total quantity of each activity cost driver
– The quantity of cost driver used by each product
36
Completing the ABC Model (2 of 2)
• The controller now had sufficient information to estimate a complete activity-based cost model for Cooper Pen’s factory– She calculated the activity cost driver rate
(ACDR) by dividing the activity expense by the total quantity of the activity cost driver
– She then multiplied the activity cost driver rate by the quantity of each activity cost driver used by each of the four products
37
Activity Cost Drivers
Activity Cost
Driver Blue Black Red Purple Total**
DL hr/unit 0.02 0.02 0.02 0.02 2,000
Mach. hr/unit 0.1 0.1 0.1 0.1 10,000
Prod. runs 70 65 50 15 200
Setup time/run 4 2.4 5.6 5.6 --
Total setup hr 280 156 280 84 800
# of products 1 1 1 1 4
**Total = per unit X quantity 50,000 40,000 9,000 1,000
38
Activity Cost Driver Rates (ACDR)
Activity Expense
Activity Cost Driver
Driver Quantity ACDR
Handle Production Runs
$66,000 Number of production runs
200 $330 per run
Set up machines $33,600 Number of setup hours
800 $42 per setup hr
Support Products
$14,400 Number of products
4 $3,600 per product
Run Machines $42,000 Number of machine hours
10,000 $4.20 per machine hr
$156,000
39
Activity Expenses Assigned
Blue Black Red Purple Total
Handle Production Runs
$23,100 $21,450 $16,500 $4,950 $66,000
Set up machines
11,760 6,552 11,760 3,528 33,600
Support Products
3,600 3,600 3,600 3,600 14,400
Run Machines
21,000 16,800 3,780 420 42,000
Total Costs Assigned $ 59,460 $ 48,402 $ 35,640 $ 12,498 $ 156,000
40
ABC Profitability Report• The controller combined the activity expense analysis for
each product with their direct materials and labor costs to obtain a new ABC profitability report
• The results from the activity-based costing system were quite different from the results based on the traditional cost system
• The controller now understood why the profitability of Cooper Pen has deteriorated in recent years:– The two specialty products, which the previous cost system had
reported as the most profitable, were in fact the most unprofitable, and losing lots of money
– The company had added large quantities of overhead resources to enable these products to be designed and produced, but their incremental revenue did not cover those costs
41
Total ABC Profitability by Product
Blue Black Red Purple Total
Sales $225,000 $180,000 $41,850 $4,950 $451,800
Material 75,000 60,000 14,040 1,650 150,690
Labor 30,000 24,000 5,400 600 60,00040% fringe on DL
12,000 9,600 2,160 240 24,000
Support 59,460 48,402 35,640 12,498 156,000Total Mfg. Expenses
176,460 142,002 57,240 14,988 390,690
Gross Margin
$ 48,540 $ 37,998 $(15,390) $(10,038) $ 61,110
G.M. % 21.6% 21.1% -36.8% -202.8% 13.5%
42
Using ABC to Improve Profitability (1 of 2)
• The ABC information provides managers with numerous insights about how to increase the profitability of Cooper Pen:– Increase either their sales volume or prices to
compensate for the large batch and product-sustaining expenses of the red and purple pens
– Impose minimum order sizes to eliminate short, unprofitable production runs
– Try to increase demand for the highly profitable black and blue pens, which could generate new revenues that exceed their incremental costs
43
Using ABC to Improve Profitability (2 of 2)
– Improve processes, particularly the processes performing batch and product-sustaining activities
• Manufacturing personnel can redirect their attention:– From trying to run their production equipment faster, in
order to improve the performance of unit-level activities– To learning how to reduce setup times, in order to
improve the performance of batch-level activities so that small batches of the specialty products would require fewer resources to produce and be less expensive
• The goal of these ABM actions is to enable the company to produce the same volume and mix of products with fewer resources– This leads to lower costs for producing low-volume, specialty
products, and reduces the pressure to raise prices or impose minimum order sizes on customers in order to make such products profitable
44
Selecting Activity Cost Drivers (1 of 2)
• Activity cost drivers are the central innovation of activity-based cost systems
• They are also the most costly to measure– Particularly the quantity of each activity cost driver
used by each product• Accordingly, it is important to understand the issues
involved in selecting activity cost drivers• The selection of an activity cost driver reflects a
subjective trade-off between accuracy and the cost of measurement– An ABC system with 50 activity cost drivers and 2,000
products would require that 100,000 data elements be estimated
45
Selecting Activity Cost Drivers (2 of 2)
• Because of the large number of potential activity-to-product linkages, management accountants attempt to economize on the number of different activity cost drivers
• Activities triggered by the same event may all use the same activity cost driver– For example, preparing production orders, scheduling production
runs, performing first part inspections, and moving materials may all use the number of production runs
• ABC system designers choose from three different types of activity cost drivers:– Transaction– Duration– Intensity (direct charging)
• The choice of a transaction, duration, or intensity cost driver can occur for almost any activity
46
Transaction Drivers• Least expensive type of cost driver• Also the least accurate
– They assume that the same quantity of resources is required every time an activity is performed
• For example, a transaction driver such as the number of setups assumes that all set ups take about the same time to perform
• For many activities, the variation in the quantity of resources used by each is small enough that a transaction driver will be fine for assigning activity expenses to the cost object– E.g., all setup times are between 30 and 35 minutes
• If the amount of resources required to perform the activity varies considerably from product to product then more accurate and more expensive types of cost drivers should be used– E.g., Setup times range from 30 minutes to 6 hours
47
Duration Drivers
• Represent the amount of time required to perform an activity• Should be used when significant variations exist in the
amount of activity required for different outputs– A transaction driver such as number of setups will overcost the
resources required to set up simple products and undercost the resources required for complex products
• More expensive to implement because they require an estimate of time needed each time an activity is performed
• The choice between a duration driver and a transactional driver is, as always, one of economics:– Balancing the benefits of increased accuracy against the costs of
increased measurement
48
Intensity Drivers• Directly charge for the resources used each time an activity
is performed• A duration driver, such as setup cost per hour, assumes
that all hours are equally costly but does not reflect the higher costs that may be required on some setups:– E.g., extra personnel, more skilled personnel, more expensive
machinery• Activity costs may have to be charged directly to the
output, based on work orders or other records that accumulate the activity expenses incurred for that output
• Intensity drivers are the most accurate activity cost drivers but the most expensive to implement
• Intensity drivers should be used only when the resources associated with performing an activity are both expensive and variable each time an activity is performed unless the measurements are inexpensive
49
Designing an ABC System (1 of 2)
• Sometimes ABC system designers get carried away with the potential capabilities of an activity-based cost system
• For product costing and customer costing purposes, most companies:– Limit their activity dictionary to 30 to 50
different activities– Choose activity cost drivers that can be
obtained simply and are available within their organization’s existing information system
50
Designing an ABC System (2 of 2)
• The goal of an ABC system should be to have the best cost system -- not the most accurate one
• The ABC system designer should balance the cost of errors resulting from inaccurate estimates with the cost of measurement
• Most of the benefits from a more accurate cost system can be obtained with simple ABC systems
51
Measuring The CostOf Resource Capacity (1 of 2)
• The calculation of activity cost driver rates are sometime based on the capacity actually used
• Analysts can obtain a better estimate for the cost of resources required to handle each production run by dividing activity expenses by the practical capacity of work the resources could perform
• Otherwise, the activity cost driver rates overestimate the cost of the activity provided
• The cost of unused capacity should not be assigned to products produced or customers served during a period
52
Measuring The CostOf Resource Capacity (2 of 2)
• The activity cost driver rate should reflect the underlying efficiency of the process: the cost of resources to handle each production order
• This efficiency is measured better by using the capacity of the resources supplied as the denominator when calculating activity cost driver rates
• Still, the cost of unused capacity should not be ignored
53
Cost of Unused Capacity (1 of 2)
• The cost of unused capacity remains someone’s or some department’s responsibility
• Usually you can assign unused capacity after analyzing the decision that authorized the level of capacity supplied– For example, if the capacity was acquired to meet anticipated
demands from a particular customer or a particular market segment, then the costs of unused capacity due to lower than expected demands can be assigned to the person or organizational unit responsible for that customer or segment
• Such an assignment is done on a lump-sum basis; it will be treated as a sustaining, not a unit-level, expense.
54
Cost of Unused Capacity (2 of 2)
• If the unused capacity relates to a particular product line then the cost of unused capacity is assigned to that product line, where the demand failed to materialize
• Unused capacity should not be treated as a general cost, to be shared across all product lines
• In making assignment of unused capacity costs, we trace the costs at the level in the organization where decisions are made that affect the supply of capacity resources and the demand for those resources
• The lump-sum assignment of unused capacity costs provides feedback to managers on their supply and demand decisions
55
Fixed and Variable Expenses
• Most indirect expenses assigned by an ABC system are committed costs
• Committed costs become variable via a two-step procedure:– First, demands for resources change either because of
changes in the quantity of activities performed or because of changes in the efficiency of performing activities
– Second, managers must make decisions to change the supply of committed resources, either up or down, to meet the new level of demand for the activities performed by these resources
56
Activity in Excess of Capacity
• If activity volumes exceed the capacity of existing resources, the result is– Bottlenecks– Shortages– Increased pace of activity– Delays– Poor-quality work
• Such shortages occur often on machines, but can also occur in human resources who perform support activities
• Facing such shortages, companies typically make committed costs variable– They relieve the bottleneck by spending more to increase the
supply of resources to perform work– This is why many indirect costs increase over time
57
Decreased Demand for Resources• Demands for indirect and support resources also can
decline– Consciously through activity-based management– Inadvertently through competitive or economy-wide forces that lead
to declines in sales
• Should the demands for batch and product-sustaining resources decrease, few immediate spending reductions will be noticed
• Even for many unit-level resources, such as machines and direct labor, reduced demands for work does not immediately lead to spending decreases
• The reduced demand for organizational resources lowers the cost of resources used, but this decrease is offset by an equivalent increase in the cost of unused capacity
58
Making Committed CostsVariable Downward
• After unused capacity has been created, committed costs will vary downward if, and only if, managers actively reduce the supply of unused resources
• What makes a resource cost “variable” downward is not inherent in the nature of the resource
• It is a function of management decisions– To reduce the demands for the resource– To lower the spending on it
59
Managers Make Costs Fixed (1 of 2)
• Organizations often create unused capacity through activity-based management actions– Process improvement– Repricing to modify the product mix– Imposing minimum order sizes on customers
• They keep existing resources in place, when demands for the activities performed by the resources have diminished
• They also fail to find new activities that could be done by the unused resources already in place
60
Managers Make Costs Fixed (2 of 2)
• The organization receives no benefits from its activity-based management decisions that reduced the demands on their resources if capacity is not reduced or redeployed
• The failure to capture benefits from activity-based management is not because their costs are “fixed”– The failure occurs because managers are unwilling or unable to
take advantage of the unused capacity they have created by• Spending less on capacity resources• Increasing the volume of work processed by the capacity
resources• The cost of these resources is only “fixed” if managers do
not exploit the opportunities from the unused capacity they helped to create
• Making decisions based solely upon resource usage (the ABC system) may not increase profits if managers are not prepared to reduce spending to align resource supply with future lower levels of demand
61
Problems Implementing ABC (1 of 3)
• Several problems arise in practice from the common approach to activity-based costing that assigns many resource expenses to activities based on interviews, surveys, and direct observation of production and support processes– The interview and survey processes are time consuming
and costly• This front-end cost to an ABC analysis is often a
barrier to widespread ABC adoption
62
Problems Implementing ABC (2 of 3)
– Inaccuracies and bias may affect the accuracy of cost driver rates derived from individuals’ subjective estimates of their past or future behavior
– Companies must periodically repeat the interviewing and surveying processes if they want to keep their activity-based cost systems updated
• High updating cost leads to infrequent updates of many ABC systems and, eventually, to obsolete cost driver estimates
– Adding new activities to the system is also difficult, requiring re-estimates of the relative amount of resource time and effort required by the new activity
63
Problems Implementing ABC (3 of 3)
– A more subtle and serious problem arises from the interview or survey process
• People estimating how much time they spend on a list of activities handed to them invariably report percentages that add up to 100%
• Few individuals report that a significant percentage of their time is idle or unused
– Accordingly, the cost driver rates calculated from this process assume that resources are working at full capacity
– But operations at capacity are more the exception than the rule
64
Time-Driven ABC:An Alternative Approach
• Several companies have overcome these problems by using a new approach for estimating their ABC models
• The insight for the new approach is simple:– Most ABC systems use a large number of
transactional cost drivers that assume each occurrence of the event (a production run, a customer order, a product to support) consumes the same quantity of resources
65
Time-Driven ABC:
• This homogeneity assumption provides the foundation for an alternative approach to estimating cost driver rates. The new approach requires two new estimates:– The unit cost of supplying capacity, and– The consumption of capacity (unit times) by
each activity
66
Unit Cost Estimate (1 of 3)
• The new procedure starts with the same information used by a traditional ABC approach: – The cost of resources that supply capacity and – The practical capacity of the resources supplied
• Practical capacity is often estimated as a percentage (e.g., 80% or 85%) of theoretical capacity
• This estimate allows time (e.g., 15 – 20%) for nonproductive time:
– For personnel, time for breaks, arrival and departure, and communication and reading unrelated to actual work performance
67
Unit Cost Estimate (2 of 3)
– For machines, an allowance for downtime due to maintenance, repair, and scheduling fluctuations
• With estimates of the cost of supplying capacity and practical capacity, the analyst can calculate the unit cost of supplying capacity:
Unit cost =Cost of capacity supplied
Practical capacity of resources supplied
68
Unit Cost Estimate (3 of 3)
• For example, assume that indirect labor employees supply about 2,500 hours of labor in total each quarter at a cost of $84,000. The practical capacity (at 80% of theoretical) is about 2,000 hours per quarter, leading to a unit cost (per hour) of supplying indirect labor capacity of:
Indirect labor cost per hour =$84,000
2000 hours
= $42 per hour
69
Unit Time Estimate
• The second piece of new information is an estimate of time used each time a committed resource performs a transactional activity– Precision is not critical– Rough accuracy is sufficient
• Estimates for the indirect labor from the Cooper Pen example are:
Resource Activity Unit Time
Indirect Labor
Production Run 5 hours
Support Products 50 hours
70
Cost Driver Rate
• Assume similar calculations regarding computer resources produced estimates of $60 per hour and 2 hours per production run
• The cost driver rate for the activity, handle production runs, can now be calculated as the costs of using indirect labor and the computer for each production run:
Unit Cost Unit Time Cost Driver
Indirect Labor Resource $42 per hour 5 hours/run $210 per run
+ Computer Resource $60 per hour 2 hours/run 120 per run
= Activity Cost Driver Rate $330 per run
71
Advantages of Time-Driven ABC
• Managers may easily update their time-driven ABC model to reflect changes in their operating conditions– They can incorporate the new knowledge by providing
reasonable estimates about the unit times required for different activities for each type of product
• Managers may also easily update the activity cost driver rates– Changes in the prices of resources supplied affect the
hourly cost rate– Activity cost driver rates change when there has been
a shift in the efficiency of the activity
72
Tracing Marketing-RelatedCosts to Customers
• The costs of marketing, selling, and distribution expenses have been increasing rapidly in recent years– Result of increased importance of customer satisfaction
and market-oriented strategies• Many of these expenses do not relate to individual
products or product lines but are associated with:– Individual customers– Market segments– Distribution channels
• Companies need to understand the cost of selling to and serving their diverse customer base
73
Alpha – Beta Example (1 of 7)
• Assume Alpha and Beta are customers generating about equal revenue and seen as equally valuable customers
• Using a conventional cost accounting system, marketing, selling, distribution, and administrative (MSDA) expenses were allocated to customers at a rate of 35% of Sales
ALPHA BETA
Sales $320,000 $315,000
CGS 154,000 156,000
Gross Margin $166,000 $159,000
MSDA expenses (@35% of Sales)
112,000 110,250
Operating profit $ 54,000 $ 48,750
Profit percentage 16.9% 15.5%• In many respects, however, the customers were not similar
74
Alpha – Beta Example (2 of 7)
• Beta’s account manager spent a huge amount of time on that account
• Beta required a great deal of hand-holding and was continually inquiring whether the company could modify products to meet its specific needs
• Beta’s account required many technical resources, in addition to marketing resources
• Beta also:– Tended to place many small orders for special products– Required expedited delivery– Tended to pay slowly
• All of which increased the demands on the order processing, invoicing, and accounts receivable process
75
Alpha – Beta Example (3 of 7)
• Alpha, on the other hand:– Ordered only a few products and in large quantities– Placed its orders predictably and with long lead times– Required little sales and technical support
• The Accounting Manager in Marketing knew that Alpha was a much more profitable customer than the financial statements were currently reporting
• He launched an activity-based cost study of the company’s marketing, selling, distribution, and administrative costs
76
Alpha – Beta Example (4 of 7)
• The multifunctional project team:– Studied the resource spending of the various accounts– Identified the activities performed by the resources– Selected activity cost drivers that could link each
activity to individual customers
• The Accounting Manager used:– Transactional activity cost drivers
• Number of orders, number of mailings
– Duration drivers• Estimated time and effort
– Intensity drivers when he had readily-available data• Actual freight and travel expenses
77
Alpha – Beta Example (5 of 7)
• The manager also used a customer cost hierarchy that was similar to the manufacturing cost hierarchy– Some activities were order-related
• Handle customer orders• Ship to customers
– Others were customer-sustaining• Service customers• Travel to customers• Provide marketing and technical support
78
Alpha – Beta Example (6 of 7)
• The picture of relative profitability of Alpha and Beta shifted dramatically
Alpha Beta
Gross Margin (as previously) $166,000 $159,000
Marketing & tech. support 7,000 54,000
Travel to customer 1,200 7,200
Distribute sales catalog 100 100
Service customers 4,000 42,000
Handle customer orders 500 18,000
Warehouse inventory 800 8,800
Ship to customers 12,600 42,000
Total activity expenses 26,200 172,100
Operating profit $ 139,800 $ (13,100)
Profit percentage 43.7% (4.2%)
79
Alpha – Beta Example (7 of 7)
• As the manager suspected, Alpha Company was a highly profitable customer– Its ordering and support activities placed few
demands on the company’s marketing, selling, distribution, and administrative resources
– Almost all the gross margin earned by selling to Alpha dropped to the operating margin bottom line
• Beta Company was now seen to be the most unprofitable customer that the company had
• While the manager intuitively sensed that Alpha was a more profitable customer than Beta, he had no idea of the magnitude of the difference
80
ABC Customer Analysis
• The output from an ABC customer analysis is often portrayed as a whale curve– A plot of cumulative profitability versus the number of
customers– Customers are ranked, on the horizontal axis from
most profitable to least profitable (or most unprofitable)
81
Customer Profitability
• Cumulative sales follow the usual 20-80 rule– 20% of the customers provide 80% of the sales
• A whale curve for cumulative profitability typically reveals:– The most profitable 20% of customers generate
between 150% and 300% of total profits– The middle 70% of customers break even– The least profitable 10% of customers lose 50% - 200%
of total profits, leaving the company with its 100% of total profits
• It is not unusual for some of the largest customers to turn out being the most unprofitable– The largest customers are either the company’s most
profitable or its most unprofitable– They are rarely in the middle
82
Managing Customer Profitability (1 of 3)
• High-profit customers, such as Alpha, appear in the left section of the profitability whale curve– These customers should be cherished and
protected– They could be vulnerable to competitive
inroads– The managers of a company serving them
should be prepared to offer discounts, incentives, and special services to retain the loyalty of these valuable customers if a competitor threatens
83
Managing Customer Profitability (2 of 3)
• The challenging customers, like Beta, appear on the right tail of the whale curve, dragging the company’s profitability down with their low margins and high cost-to-serve
• The high cost of serving such customers can be caused by their:– Unpredictable order pattern– Small order quantities for customized
products– Nonstandard logistics and delivery
requirements– Large demands on technical and sales
personnel
84
Managing Customer Profitability (3 of 3)
• The opportunities for a company to transform its unprofitable customers into profitable ones is perhaps the most powerful benefit the company’s managers can receive from an activity-based costing system
• Managers have a full range of actions for transforming unprofitable customers into profitable ones– Process improvements– Activity-based pricing– Managing customer relationships
85
Process Improvements
• Managers should first examine their internal operations to see where they can improve their own processes to lower the costs of serving customers
• If customers are migrating to smaller order sizes:– Strive to reduce batch-related costs, such as setup
and order handling– Electronic systems greatly lower the cost of
processing large quantities of small orders• If customers prefer suppliers offering high variety
– Try to customize products at the latest possible stage– Use information technology to enhance the linkages
from design to manufacturing
86
Activity-Based Pricing
• Pricing is the most powerful tool a company can use to transform unprofitable customers into profitable ones
• Activity-based pricing establishes a base price for producing and delivering a standard quantity for each standard product– To this base price, the company provides a menu of
options, with associated prices, for any special services requested by the customer
• Special services may be priced just to cover costs or also to earn a margin
• Activity-based pricing prices orders, not products
87
Managing Relationships
• Companies can transform unprofitable customers into profitable ones by persuading the customer to use a greater scope of the company’s products and services– The margins from such increased business purchases
contribute to covering customer-sustaining costs• If these efforts fail, the company may then contemplate
“firing” the customer• Some customers may be unprofitable only because it is
the start of the relationship with the company– Companies can afford to be more tolerant of newly-acquired
unprofitable customers than they can of unprofitable customers they have served for 10 or more years
88
ABC at Service Companies (1 of 2)
• Although ABC had its origins in manufacturing companies, many service organizations today are obtaining great benefits from this approach– In practice, the actual construction of an ABC model is
nearly identical for both types of companies– This should not be surprising since, in manufacturing
companies, the ABC system focuses on the “service” component of the company
89
ABC at Service Companies (2 of 2)
• Service companies in general are ideal candidates for activity-based costing– Virtually all costs are indirect and appear fixed– They often do not have direct, traceable costs to
serve as convenient allocation bases– They must supply virtually all their resources in
advance to provide the capacity to perform work for customers during each period
90
Implementation Issues (1 of 2)
• Not all ABC systems have been sustained or contributed to higher profitability for the company– Some companies have experienced difficulties and frustrations
in building and using activity-based cost and profitability models for some of the following reasons
• Lack of clear business purpose– The project may start in Accounting/Finance, and nobody
outside the department understands what changes need to be made and why
• Lack of senior management commitment– The group (usually Accounting/Finance) that initiates the project
probably does not have the authority to make decisions about processes, product designs, etc., without full senior management support
91
Implementation Issues (2 of 2)
• Delegating the project to consultants– Consultants are usually not familiar enough with the business’s
organization and problems and may not be able to build management consensus
• Poor ABC model design– The model may be too complicated to build and maintain and too
complex for managers to understand and act upon– Or the model may use arbitrary allocations that merely create
different distortions than the old system– The new data requirements may increase the workload of other
functions without increasing the benefits to them
• Individual and organizational resistance to change– People may feel threatened by the suggestion that their work
might be improved– Resistance may be overt, but it may be more subtle and passive