谢卫江 Xie Weijiang

2009.6.19 2009.6.19 北京北京

Beijing, Jun. 19, 2009Beijing, Jun. 19, 2009

谢卫江谢卫江Xie WeijiangXie Weijiang

创新监理模式，规范监理流程，促进设备监理工创新监理模式，规范监理流程，促进设备监理工作健康发展作健康发展

Innovative Modes and Standardized Flow to Spur the SInnovative Modes and Standardized Flow to Spur the S

ound Development of Plant Engineering Consultancyound Development of Plant Engineering Consultancy

公司介绍Profile

• 中国水利电力物资有限公司是由中国大唐集团公司控股，中国水利投资集团公司、中国华能集团公司、国投资产管理公司参股的国有大型物流企业，注册资金 4.73 亿元。

• China National Water Resources & Electric Power Materials & Equipment Co., Ltd. (CWEME) is a large-sc

ale state-owned logistics enterprise held by China Datang Corporation and shared by China Water Investmen

t Group Corp., China Huaneng Group, and State Development & Investment Corp.. Its registered capital is R

MB 473 million Yuan.

• 公司前身为 1955 年成立的电力工业部供应司，历经水利电力部供应司，电力部、水利电力部、能源部物资局等演变。 1988 年改制为中国水利电力物资有限公司。 2002 年底划归为中国大唐集团公司。公司在北京、天津、上海、西安、广州、成都、沈阳、武汉等城市设有 8 个全资子公司和 2 个分公司。

• The former company is Supply Department of Ministry of Power Industry which was established in 1955, and

evolved through the Supply Department of Ministry of Water Conservancy & Electric Power, Ministry of Ele

ctric Power, Ministry of Water Conservancy & Electric Power, and Commodities Bureau of Energy Departm

ent. In 1988 it was restructured to be China National Water Resources & Electric Power Materials & Equipm

ent Co., Ltd. At the end of 2002, it was held by China Datang Corporation. It has 8 exclusively-invested affilia

tes and 2 branches in Beijing, Tianjin, Shanghai, Xi’an, Guangzhou, Chengdu, Shenyang, and Wuhan.

公司介绍Profile

• 公司具备进出口资格、建设工程设备招标甲级资质、国际招标甲级资质、设备监理甲级资质、无损检测等近二十项国家级经营资质，是电力行业中经营资质最为全面的企业之一。公司在招标代理、进口代理、管道供应、备品备件、设备监理、工程项目物资管理、 CDM 、安全评价等业务方面积累了丰富经验，在电力及煤化工行业处于领先地位。

• Our company is qualified for export and import, and is one of the enterprises holding v

arious kinds of certificates in the electric power sector with nearly 20 grade-A certificat

es for construction equipment tendering, international tendering, plant engineering con

sultancy and non-destructive detection. CWEME has rich experiences in operations suc

h as tender representation, import representation, pipe supply, spare parts, plant engin

eering consultancy, project supplies management, CDM, and safety assessment, thus ra

nking the top in the power and coal chemical processing industries.

公司介绍Profile

• 公司的全资子公司北京中唐电工程咨询有限公司专业从事设备监理业务，具有火电工程和水电工程甲级资质。 2003 年以来先后承担了大唐、华能、国华、国投、粤电以及地方省投等 100 多个火电、水电、风电、燃机以及煤化工、脱硫设备等项目的设备监理与金属监检服务，承担了斯里兰卡、巴基斯坦、苏丹、印尼、土耳其等多个大型出口设备的监理工作，仅 2008 年度公司共承担了 22 个项目 7000 多万元的设备监理工作。

• One of our exclusively-invested affiliates – Beijing Zhongtang Electric Power Engineering Consultation C

o., Ltd. is engaged in plant engineering consultancy with grade-A certificates for thermal power plants an

d hydropower plants projects. Since 2003, it has involved in plant engineering consultancy and metal dete

ction services for more than 100 projects of thermal power plants, hydropower plants, wind power plants,

gas turbines, coal chemical processing, and desulfurizing devices that were contracted by China Datang C

orporation, China Huaneng Group, Guohua Energy Investment Co., Ltd. State Development & Investme

nt Corp. Guangdong Yudean Group Co., Ltd. or the provincial or local development & investment compa

nies, and the large-scale plant engineering consultancy exported to Sri Lanka, Pakistan, Sudan, Indonesia,

Turkey, etc. It has more than 22 projects of plant engineering consultancy valued over 70 million Yuan.

• 目前，公司拥有注册设备监理工程师 60 多人、无损检测人员 30 多人，专业监理工程师近 300 多人，专业涵盖了锅炉、汽轮机、发电机、水轮机、燃机、煤化工、核电、生物质发电、输配电、自动控制、机械制造、焊接、无损检测等各个专业了；公司在上海、哈尔滨、成都、武汉等主要设备制造厂设有工作组，形成了覆盖全国的服务网络，在电力行业设备监理业务占有率达 15% 左右。

• The company now has more than 60 registered plant engineering consultants, over 30 no

n-destructive testing personnel, and nearly 300 professional consulting engineers, coveri

ng such fields as boiler, steam turbine, generator, hydraulic turbine, gas turbine, coal ch

emical processing, nuclear power, bio-energy power, power transmission and distributio

n, auto control, machinery engineering, welding, and non-destructive detection. We have

set work groups in main equipment manufacturers in Shanghai, Harbin, Chengdu, Wuh

an, forming a service network nationwide with a market share of about 15% in plant en

gineering consultancy in the power industry.

公司介绍Profile

序号S/N

工程名称Project Description

备注Remarks

1 大唐户县电厂 2×300MW亚临界机组2×300MW sub-critical units in Huxian Power Plant set up by Datang

三大主机The three main units

2 大唐灞桥电厂 2×300MW亚临界机组2×300MW sub-critical units in Baqiao Power Plant set up by Datang

三大主机和主要辅机The three main units and main auxiliaries

3 大唐西固电厂 2×300MW亚临界机组2×300MW sub-critical units in Xigu Power Plant set up by Datang


4大唐安阳电厂 2×300MW亚临界机组2×300MW sub-critical units in Anyang Power Plant set up by Datang


5大唐太二电厂 2×300MW亚临界机组2×300MW sub-critical units in Taiyuan No.2 Power Plant set up by Datang


6粤电茂名电厂 2×300MW亚临界机组2×300MW sub-critical units in Maoming Power Plant set up by Yudean


7兰州铝厂 3×300MW亚临界机组3×300MW sub-critical units in Lanzhou Aluminum Factory

主机和主要辅机The main units and main auxiliaries

主要业绩Performances


序号S/N


备注Remarks

8大唐珲春电厂 2×330MW亚临界机组2×330MW sub-critical units in Hunchun Power Plant set up by Datang


9国华准格尔电厂 2×330MW亚临界机组2×330MW sub-critical units in Junggar Power Plant set up by Guohua


10大唐长三热 2×300MW亚临界机组2×300MW sub-critical units in Changsan Thermal Power Plant set up by D

atang


11大唐七台河二期 2×600MW亚临界机组2×600MW sub-critical units in Qitaihe Phase II Project set up by Datang


12大唐韩城电厂 2×600MW亚临界机组2×600MW sub-critical units in Hancheng Phase II Project by Datang


13国华黄骅电厂 2×600MW超临界机组2×600MW super-critical units in Huanghua Power Plant set up by Guohua

主要辅机main auxiliaries

14国华台山电厂 2×600MW超临界机组2×600MW super-critical units in Taishan Power Plant set up by Guohua


15国华锦界电厂 2×600MW超临界机组2×600MW super-critical units in Jinjie Power Plant set up by Guohua



序号S/N


备注Remarks

16大唐三门峡 2×600MW 超临界机组2×600MW super-critical units in Sanmenxia set up by Datang


17大唐马鞍山 2×660MW 超临界机组2×660MW super-critical units in Maanshan set up by Datang


18大唐湘潭二期 2×600MW 超临界机组2×600MW super-critical units in Xiangtan power plant Phase II Project se

t up by Datang


19粤电汕尾电厂 2×600MW 超临界机组2×600MW super-critical units in Shanwei Power Plant set up by Yudean


20粤电惠来电厂 2×600MW 超临界机组2×600MW super-critical units in Huilai Power Plant set up by Yudean


21中电防城港电厂 2×600MW超临界机组2×600MW super-critical units in Fangchenggang Power Plant set up by C

EEG三大主机和主要辅机The three main units and main auxiliaries

22国投钦州电厂 2×600MW 超临界机组2×600MW super-critical units in Qinzhou Power Plant set up by SDIC


序号S/N


备注Remarks

23大唐漳州六鳌风电场 26MW三期工程26MW unit in Zhangzhou Liu’ao Wind Power Plant Phase

III Project set up by Datang

主机和主要辅机Main unit and main auxiliaries

24大唐三门峡黄河风电场 25.5MW 工程25.5MW unit in Sanmenxia Yellow River Wind Power Plan

t Project set up by Datang

主机和主要辅机Main unit and main auxiliaries

25大唐多伦煤化工工程Duolun Coal Chemical Processing Project by Datang

辅机设备Auxiliary devices

26博奇科技 23 个项目的脱硫设备Desulfurizing equipment for 23 projects by Beijing Bootes

Electric Power Science And Technology Co.,Ltd

每个项目 16 个设备16 devices for each projects

27龙滩 7×700MW 水电机组7×700MW hydropower units by Longtan Hydropower Deve

lopment Co., Ltd.

三方联合体执行Jointly done by three parties


规范管理和创新Standardized Management and Innovation

• 公司编写的《中国大唐集团公司发电设备监理管理办法》明确了设备监理范围、见证内容和见证方式，是指导中国大唐集团公司所属项目进行设备监理的指导性文件公司，对提高设备出厂质量起到了重要作用。

• The Management of Power Generation Plant Engineering Consultancy of China Datang Corporation,

which was compiled by our company and specifies the coverage of plant engineering consultancy, w

itness contents and methods, is a guide for plant engineering consultancy in projects contracted by

China Datang Corporation and plays an important role in improving equipment quality.

• 基于“全过程控制的设备监理管理体系构建与实践”，获得了中国电力企业联合会颁发的 2008年度“全国电力企业管理现代化创新成果”一等奖。自主开发了的设备监理系统管理系统（SMIS），实现了信息的快速传递、浏览和共享，在项目执行过程中起到了较好的效果。

• With “ the Structure and Practices of Whole-process Controlled Management System of Plant Engi

neering Consultancy”, we have got the first award of “National Modernized Management Innovati

on of the Electric Power Enterprises”. The Supervision Management Information System (SMIS) d

eveloped by us realized fast transferring, browsing and sharing information, and got good effects in

project implementation.

提高了信息化程度，实现质量、进度、资金全过程实时网络在线控制与管理Informationization has been improved, real-time online control and management of quality, sc

hedule, and capitals has been realized.

监理方式创新 Innovative Supervision Modes

• 常规的文件审核、现场见证设备监理方式不能发现设备材质存在原发性内在质量缺陷，不能发现制造厂不进行 100% 检查造成的漏检或检查不严误判产生的质量缺陷。公司将设备制造过程中的金属检验作为控制制造质量的主要手段，明确了检验项目、方法、数量，在设备制造过程中使用检测仪器进行超声、磁粉、射线、渗透、金相、硬度等方法对设备的原材料材质、焊缝、厚度进行检测，极大地提高了设备质量过程中的质量。

• The conventional plant engineering consulting mode of document examination and on-site ins

pection can not enable us to find out intrinsic defects in equipment quality and defects that we

re not checked by the manufacturer as it only checked carelessly or part of their products. W

e mainly focus on metal inspection in equipment manufacturing as a mean of controlling the

quality, making clear how to inspect, what and how many to be inspected. We adopt ultrason

ic detection, magnetic powder detection, X-ray detection, penetration detection, metallograph

ic inspection and hardness inspection on the materials, welding seams, and thickness of equip

ment, thus considerably improving the quality.

• 公司在设备交货进度方面强化了控制，设立的专门的进度协调人员，设备监理工作涵盖了设备监造、监检和催交三部分内容，提升了设备的制造质量和交货进度的控制力，中国大唐集团公司是五大发电集团公司第一个全方位进行设备监理管理的公司，对促进电力建设、提高工程质量起到了很大的作用，在电力行业中起到了很好的示范作用。

• We have intensified control of goods delivery schedule with special coordinators responsi

ble for the schedule. Our plant engineering consulting tasks cover equipment consulting

engineering, inspection, and delivery. We have effectively controlled the manufacturing

quality and delivery schedule. China Datang Corporation is the first among the Top 5 Po

wer Generation Groups in China to carry out the complete management of plant enginee

ring consultancy, which plays a key role in promoting power constructions and improvi

ng engineering quality, and leads the way in the electric power industry.

监理方式创新 Innovative Supervision Modes

监理成效Achievements in Consulting Engineering

• 公司 2008 年共对 20 个火电、 3 个水电、 4 个风电项目实施了设备监理，涉及 280台套设备。发现质量缺陷1161 项，其中监检 513 项，常规监理 648 项。监检发现重大缺陷达 20 项，监理 15 项；其中，某个项目仅1台锅炉和汽机的 26 个部件就存在缺陷 30余项，检查出 P91 集箱角焊缝存在长裂纹等重大质量缺陷。

• In 2008, 20 thermal power plants, 3 hydropower plants, and 4 wind power plants projects, involving 280 sets

of equipment are under the plant engineering consultancy. We have found out 1161 defects, 513 found in insp

ection consulting engineering and 648 in regular consulting engineering. There found 20 vital defects in inspe

ction consulting engineering and 15 in regular consulting engineering. In a project, 30 defects existed in just 1

set of boiler and 26 parts of turbine, and long cracks occurred on the welding seam of P91 header.

• 通过采用检测设备进行制造过程中的检查，发现了诸如材质错用、集箱内有大量的遗留物、大板梁焊缝存在贯穿性裂纹、汽轮机转子毛坯报废等重大质量缺陷，挽回了损失，保证了基建建设工期。同时，极大地避免了机组生产运营中的事故率，取得了较好的综合效益，赢得了客户的好评。

• By inspection through detection devices, we have found out vital defects such as misused materials, remainder

s in the header, penetrating cracks on the welding seam of the plate girder, and scrapped turbine rotor blank.

We retrieved losses, guaranteed projects schedule, prevented potential accidents in operation, got good compr

ehensive effects, and gained high reputation from our clients.

真诚希望与广大同行进行交流，共同促进中国设备监理事业的发展。

We sincerely hope to exchange with our counterpart

s to accelerate the development of the plant engineer

ing consultancy in China.

谢谢大家！Thank you!

谢卫江 Xie Weijiang

Documents

Transcript of 谢卫江 Xie Weijiang