현대제철 Product Catalog
-
Upload
briankimbj -
Category
Documents
-
view
463 -
download
5
description
Transcript of 현대제철 Product Catalog
-
www.hyundai-steel.com Products Guide
Wide Flange Beams
Steel Shapes
Sheet Piles
Rails
Reinforcing Bars
Round Bars
Hot Rolled Steel
Stainless Steel
Ingots for Forging
Heavy Machinery
Rolls
www.hyundai-steel.com
Printed, 2009. 6
(Cold Rolled Stainless
Steel Sheets, Coils & Strips)
(Rolls)
(Heavy Machinery)
(Ingots for Forging)
(Hot Rolled Steel)
(Round Bars)
(Angles)
(Reinforcing Bars)
15
28
32
35
39
44
57
66
67
68
H(Wide Flange Beams)
(Sheet Piles)
33(Rails)
HYUNDAI STEEL Main Products
-
Products Guide HYUNDAI STEEL
03Over the past 50 years, HYUNDAI STEEL hascome a long way to become a prime globalsteel company. Today with a refreshed mind,we are fully committed to serving ourcustomers better. Armed with tremendousgrowth potentials and experience in creativemarket exploration, we are now striving toclaim global market leadership in steelmanufacturing to help upgrade our servicesand the nations competitiveness.
Corporate Introduction (CI)
The symbol H, which embosses the mission of Hyundai Steel, stands for High Spirit, Harmony,and Humanity. The firm and stable axes on both sides of the H imply the past and new businessesand customers. The bridge connecting the two axes suggests a promising future of Hyundai Steel,growing with balanced contact and integration of both axes.The bright blue color shows the leading position of Hyundai Steel in future environmental concerns,proposing a new blueprint based on modern technology and reliability. In other words, High Spirit,Harmony, Humanity collectively represent that Hyundai Steel will grow into a world-leading steelcompany with high spirit and harmony, thereby contributing to the humanity.
. .
HHigh Spirit( ), Harmony(),
Humanity() .
H , ,
(Bridge) .
.
, High Spirit, Harmony, Humanity
.
Table of Contents
02 (Introduction)
04 CEO (Message from the CEO)
06 (Company History)
08 / (Manufacturing Process)
10 (Products Guide)
15 H (Wide Flange Beams)
22 H (H-Bearing Piles)
23 H(Asymmetric H-Beams)
23 H (Checkered H-Beams)
24 H (Junior Beams)
24 C.T. (Structural Tees)
27 I (I-Beams)
27 I (I-Beams for Mine Support)
28 (Equal Angles)
30 (Unequal Angles)
30 (Inverted Angles)
31 (Channels)
31 (Parallel Flange Channels)
32 (Sheet Piles)
32 (Mast Beams)
33 (Railway Rails)
34 (Light Rails)
34 (Elevator Guide Rails)
35 (Reinforcing Bars)
39 (Round Bars)
44 (Hot Rolled Steel)
57 (Cold Rolled Stainless Steel Sheets, Coils & Strips)
66 (Ingots for Forging)
67 (Rolls)
68 (Heavy Machinery)
70 (Chemical Composition)
73 (Mechanical Properties)
78 (Dimensional Tolerance)
82 (Tolerance on Weight)
83 (Quality Certification)
88 (Conversion Table)
92 (Caution)
98 (HYUNDAI STEEL Network)
-
Products Guide HYUNDAI STEELProducts Guide HYUNDAI STEEL
0504
Message from the CEO
1953
.
2000
,
20047
. ,
FTA
.
, ,
.
. , ,
.
. ,
,
.
502
.
.
.
.
HYUNDAI STEEL was founded in 1953 as the first domestic steel
company in Korea. Over the last half century, HYUNDAI STEEL has
become a significant player in the Korean economy and has been
a major contributor to the nations growth.
In 2000, our company took part in a massive restructuring of the
steel industry, which saw a merger with Kangwon Industries and
the acquisition of Sammi Steel Company. As a result, HYUNDAI
STEEL was made a comprehensive steel company. In 2004, the
takeover of Hanbo Steel Company, which had been stalled for
seven years, was finalized. HYUNDAI STEEL emerged from this
restructuring stronger and better prepared to move forward. We
now have a strategic distribution network connecting Incheon,
Pohang and Dangjin, giving us a competitive advantage in the
imminent Free Trade Agreement between China, Japan and Korea.
This was made possible by our ability to revitalize Dangjin Works.
HYUNDAI STEEL now has a strong portfolio in construction use,
railroad rails, stainless sheets, hot rolled steel and is well on its
way to becoming a globally competitive comprehensive steel
company.
Looking to the future, HYUNDAI STEEL is in the midst of
developing a strategic industrial complex. This will increase our
companys competitiveness in the domestic steel market by
integrating innovation, scale and automation at our new eco-
friendly steelworks.
Success stories like this reflect our ability to create new technical
developments, management innovations and superior products,
without diminishing our policy of first-class customer service and
ethical business practices.
Our work at HYUNDAI STEEL over the past fifty years has been
driven by our belief in the infinite possibilities of steel and we will
continue to be driven by this belief over the next 50 years and
beyond. Through passion and an unwavering commitment,
HYUNDAI STEEL strives to become a leader not only in the
domestic market, but in the global market as well.
I welcome all of our stakeholders to join us in making HYUNDAI
STEEL one of the most competitive, most trusted, and most
complete steel companies in the world.
Thank you.
As a global corporate citizen, HYUNDAI STEEL aims to add value and to raise the overall quality of human life
Seung Ha, ParkVice Chairman and CEO, HYUNDAI STEEL
-
Products Guide HYUNDAI STEELProducts Guide HYUNDAI STEEL
06 07
Company History
1982. 3. 5 Commissioned a wide flange beam mill
1983. 2. 2 Commissioned a casting mill
1985. 2. 28 40 (50 )Expanded 40 ton electric furnace mill to 50 ton mill
1986. 1. 31 60 Converted 60 ton electric furnace mill
1986. 2. 1 Converted wire manufacturing mill
1987. 2. 28 30 (40 )Expanded 30 ton electric furnace mill to 40 ton mill
1987. 5. 23 Made a public company
1990. 3. 15 ( 5)Commissioned a stainless cold rolled steel mill (50,000 tons/year)
1990. 9. 15 ( 12)Expanded stainless cold rolled steel mill (120,000
tons/year)
1992. 1. 30 H 110 Completed the 1.1 million ton wide flange beams mill
1992. 10. 4 Became a full member of the International Iron & Steel Institute
1993. 12. 19 Renovated the shapes mill
1994. 12. 20 90 2 Completed the 90 ton electric arc furnace mill and second No.2 reinforcing bar mill
1997. 10. 4 Completed the R&D building
1998. 3. 20 120 Completed the 120 ton electric arc furnace mill and new shapes mill
2000. 3. 15 () Merged with Kangwon Industries Ltd.
2000. 12. 5 () Acquired Sammi Steel Company Ltd.
2001. 4. 2 Reincorporated into Hyundai Motor Group
2001. 7. 27 INI Steel Changed name to INI Steel Company
2004. 10. 1 () Acquired Dangjin Steelworks (Hanbo Iron & Steel) assets
2004. 10. 12 () Dangjin Works was merged and acquired
2005. 5. 2 A Completed commercial test run of Dangjin hot rolledsteel mill production
2006. 3. 10 Changed name to
2006. 9. 8 5 A harbor opening ceremony for ships with a draft of50,000 tons
2006. 10. 27 B Completion Hyundai hot-rolled steel mill
Ground-breaking ceremony for integrated steel mill
2007. 7. 2 Ground-breaking ceremony for the closed-loop type raw material treatment facility for the integrated steel mill
2008. 6. 30 UN Joined UN Global Compact
2008. 10. 31 Developed railways for magnetic levitation train
2008. 12. 15 (ISO27001)Obtained Information Security Management SystemRequirements (ISO 27001) Certification
1953. 6. 10 Established as Korea Heavy Industry Corporation
1962. 11. 10 ()Changed name to Incheon Heavy Industry Company Ltd.(Privatized)
1964. 9. 1 Established Incheon Iron & Steel Company
1970. 4. 1 Merged with Incheon Heavy Industry Company Ltd.
1972. 5. 31 Commissioned a wire manufacturing
1973. 7. 5 40 Commissioned a 40 ton crude steel facility
1973. 11. 20 Commissioned a wire rod rolling mill
1975. 5. 8 Commissioned a mini mill
1978. 6. 22 Incorporated into Hyundai Group
1979. 3. 27 60 Commissioned an electric arc furnace mill
1980~90~1979 2000
-
Products Guide HYUNDAI STEEL
08 09
Products Guide HYUNDAI STEEL
Manufacturing Process /
Incheon Works92450430. 500. 2007 1 5 2, .
The plant has a production capability of 4.52 million tons of steelmaking and 4.26million tons of rolling on a total area of 920,000. It is a representative plantpracticing green management since industrial water used at Incheon plant is recycledfrom Gwjwa Water Recycling System by annually treating 5 million tons of sewage.
Steel pier at Incheon North Port, completed in January 2007, is composed of 2 wharfs with 50,000 ton capacity and showsexcellent reduction in logistics costs and reducing environment pollutions.
Pohang Works66320, 330 H, , . . .
The plant has a production capacity of 3.2 million tons of steelmaking and 3.25 milliontons of rolling on a total area of 660,000 and manufactures various products like H-beams, Reinforcing Bars, Round steel and Heavy machineries. The plant especially isthe only one supplying rails for high-speed railways and normal railways and
manufacturing rolling recognized as a first-class product in the world and leading domestic rolling markets. The plant is beingrenovated by replacing selling facilities.
Qingdao Factory2000 7 66,000, T/ASSY 15,000, ROLLER8,000. 2002 10, 23 1, 50% .
A plant was invested in China in July 2000 and has the production capability of 15,000units of T/ASSY for excavators, 8,000 units of roller on total area of 66,000. HyundaiSteel is actively developing the Chinese market with the Chingdao plant, which took firstplace in the undercarriage market which is a part for excavators within 2 years and 3
months after the start of operations in October 2002 and has about 50% of market share.
Dangjin Works739ABC. A120 A, B 300. C. 340, 610. .
It has a total area of 7,390,000 and broadly divided into A-block, B-block and C-blockfor constructing iron works. A-block consists of a Reinforcing Bars plant with an annualcapacity of 1.2 million tons and hot-rolled steel mill producing hot-rolled steel with steel
scrap as materials. B-block is composed of hot-rolled steel mill with annual capacity of 3 million tons. An integrated steel mill isbeing constructed in C-block that will include blast furnace. The capacity to produce crude steel at Dangjin Plant is 3.43 milliontons and the capacity to produce products like Reinforcing Bars, hot-rolled steel plate is 6.06 million tons. Integrated steel mill isconstructed in the future, it will bounce Hyundai Steel back and will rewrite the history of Korean steel industry.
Cold Rolled Stainless Steel Coils & Sheets
Hot Rolled Steel CoilsShapes, Bars & Castings
Electric Arc Furnace
Electric Arc Furnace
Continuous Casting Machine
Reheating Furnace
Roughing Mill
L.F
V.D
Finishing Mill Coiler
Hot Coil Coil Build-up Cold Rolling (Sendzimir) Annealing & Pickling
Coil
Skin Pass
Polishing
Slitting & TrimmingCoil
SheetCut to Length
L.F V.D
Beam-BlankH-Beam
Equal Angle
Channel
Heavy Rail
I-Beam Structural Tee
Unequal Angle
Sheet Pile
Light Rail
Inverted Angle
Reinforcing Bar
Round Bar
BloomReheating Furnace
Break Down Mill, Universal Beam Mill
Break Down Mill, Medium Section Mill
Continuous Mill
Billet
CastingIngot
VerticalCentrifugal Casting
Finish Machining Roll
VAD/VIC Pouring Heat Treatment Furnace
Continuous Casting Machine
-
Products Guide HYUNDAI STEELProducts Guide HYUNDAI STEEL
10 11
(Products
Guide)
(Products
Guide)
Railway Rails
30Kg/m ~ 60Kg/m
73Kg/m
70Kg/m
15Kg/m ~ 22Kg/m
8 ~ 24K
30A KS R 9106, 911037A, JIS E 1101, 1120
50N, 60,UIC60 ASTM A 1, AREA, UIC
73 USER Spec.
70S KNR
15 KS R 9101, JIS E 110320, 22 BS 248, DIN 5901
8K, 13K,18K, 24K 94-439
D 10 ~ D 57SR 240 SD 350 SD 400WSR 300 SD 400 SD 500WSD 300 SD 500
(Grade 40)(Grade 60)
Bar No.3 ~ No.18
19 ~ 250
0.3 ~ 4.0mm
Crane Rails
Point Rails
Light Rails
Elevator Guide Rails
Reinforcing Bars
Round Bars
Cold Rolled Stainless SteelSheets, Coils & Strips
SS 400 SM 45C SCM 440SS 490 SM 50C SCM 445SS 540 SM 55C 10B35MSM 10C SM 58C 30M84SM 15C SM 43C SCR 440BSM 20C SM 48C SCR 420SM 25C SM 53C SCR 440SM 30C A105 R4SM 35C SCM 415 R 3SSM 38C SCM 420 SBC 70SM 40C SCM 43515B37B S43BCH SMN443HSMN420H S40CVS S45CVMNSAE1008 1050M S48CMCK35M S53CM SCMHT
STS 304 STS 410 STS 436LSTS 304L STS 430 STS 304J1STS 316 STS 409LSTS 316L STS 410L
KS D 3503, 3515/3051, 3707, 3708, 3709, 3711, 3723, 3724, 3752, 3754
JIS G 3101, 3106/3191A 5526
ASTM A36-36M, 242, 283441, 572/6-6M
BS 4360DIN 17100/1013IS 226/808/1852
KS D 3504 JIS G 3112DIN 488 BS 4449SAUDI ARABIAN Standard
ASTM A 615
KS D 3698JIS G 4305ASTM A 240
Designation
Nominal Size
KSKS Symbol
Applicable Standards
Products Guide
Products Tables (unit) : mm
HWide Flange Beams
HWide Flange Beams For Building Structures
Metric SeriesH100 x 100 ~ H900 x 300
Inch SeriesW4(4" x 4") ~ W27(27" x 10")
H190 x 197
H312x234x344 ~ H336x240x350
H100 x 100 ~ H800 x 300
H150 x 75 ~ H350 x 175
Metric Series50 x 100 ~ 400 x 300
125 x 75 ~ 600 x 190
100 x 80 ~ 130 x 100
25 x 25 ~ 250 x 250
100 x 75 ~ 150 x 90
200 x 90 ~ 450 x 125
75 x 40 ~ 380 x 100
100 x 50 ~ 380 x 100
400 x 100 ~ 500 x 200600 x 130 ~ 600 x 210
H H - Bearing Piles
HCheckered H - Beams
HAsymmetric H - Beams
HJunior Beams
C.T.Structural Tees(Cut Tees)
II - Beams(Standard Beams)
II - Beams for Mine Support
Equal Angles
Unequal Angles
Inverted Angles
Channels
TFC
PFC
Sheet Piles
SS 400 SS 490SS 540SM 400ASM 400BSM 490ASM 490BSM 490YASM 490YBSM 520BSHN 490
SS 400 SS 490 SS 540 SM 400A SM 400BSM 490ASM 490BSM 490YA SM 490YBSM 520B
SG1SG2
SY 295SY 390
KS D 3503, 3515/3502/3866F 4603
JIS G 3101, 3106/3192 A 5526
ASTM A36-36M, 242, 283 441, 572, 992/6-6M
BS 4360/4, 4848DIN 17100/1019, 1020,
1025, 1026, 1028, 1029IS 226/808/1852EN 10025/10034
KS D 3503, 3515/3502F 4603
JIS G 3101, 3106/3192A 5526
ASTM A36-36M, 242, 283441, 572/6-6M
BS 4360/4, 4848DIN 17100/1019, 1020,
1025, 1026, 1028, 1029IS 226/808/1852EN 10025/10056
KS E 4002, JIS M 2504DIN 21544/21541, BS 4360/4
KS F 4604JIS A 5528
Designation
Nominal Size
KSKS Symbol
Applicable Standards
Metric SeriesH200 x 200 ~ H400 x 400
Inch SeriesHP8(8" x 8") ~ HP14(14" x 14")
Mast Beams
147x44x11~ 228.6x95.25x15.88 10V 27 USER Spec.
-
Products Guide HYUNDAI STEELProducts Guide HYUNDAI STEEL
12 13
(Products
Guide)
(Products
Guide)
Rolled Steels for GeneralStructure
*
1.6~16mm
600~1,560mm
Max 28 ton
* ( )
Rolled Steels forWelded Structure
Hot Rolled Mild SteelPlates, Sheets & Strip
Hot Rolled Carbon SteelStrip for Pipes & Tubes
Superior Atmospheric ResistingRolled Steels
Carbon Steels forMachine Structural Use
SS330
SS400
SS490
SS540
SM400A,B,C
SM490A,B,C
SM490YB
SPHC,D,E
SPHT1,2,3,4
SPA-H
S10C~S55C
SS330
SS400
SS490
SS540
SM400A,B,C
SM490A,B,C
SM490YB
SPHC,D,E
HRS1,2,3,4
SPA-H
SM10C~SM55C
Designation
Applicable Standards
KS JIS
Products Tables
Nominal Size
Memo
HotRolledSteels
-
14
Products Guide HYUNDAI STEEL
15
1. Wide Flange Beams HDimensions and Sectional Properties
(1) Metric Series
100 x 100 100 x 100 6 8 10 21.9 17.2 383 134 4.18 2.47 76.5 26.7 2.73 1.250 87.6 41.2
125 x 125 125 x 125 6.5 9 10 30.31 23.8 847 293 5.29 3.11 136 47 3.43 1.110 154 71.9
150 x 75 150 x 75 5 7 8 17.85 14.0 666 49.5 6.11 1.66 88.8 13.2 1.96 2.860 102 20.8
150 x 100 148 x 100 6 9 11 26.84 21.1 1,020 151 6.17 2.37 138 30.1 2.65 1.650 157 46.7
150 x 150 150 x 150 7 10 11 40.14 31.5 1,640 563 6.39 3.75 219 75.1 4.12 1.000 246 115
200 x 100198 x 99 4.5 7 11 23.18 18.2 1,580 114 8.26 2.21 160 23 2.57 2.500 180 35.7
200 x 100 5.5 8 11 27.16 21.3 1,840 134 8.24 2.22 184 26.8 2.6 2.500 209 41.9
200 x 150 194 x 150 6 9 13 39.01 30.6 2,690 507 8.3 3.61 277 67.6 4.03 1.440 309 104
200 x 200 8 12 13 63.53 49.9 4,720 1,600 8.62 5.02 472 160 5.5 0.835 525 244
200 x 200 200 x 204 12 12 13 71.53 56.2 4,980 1,700 8.35 4.88 498 167 5.53 0.817 565 257
208 x 202 10 16 13 83.69 65.7 6,530 2,200 8.83 5.13 628 218 5.61 0.643 710 332
250 x 125248 x 124 5 8 12 32.68 25.7 3,540 255 10.4 2.79 285 41.1 3.23 2.500 319 63.6
250 x 125 6 9 12 37.66 29.6 4,050 294 10.4 2.79 324 47 3.26 2.220 366 73.1
250 x 175 244 x 175 7 11 16 56.24 44.1 6,120 984 10.4 4.18 502 113 4.68 1.270 558 173
244 x 252 11 11 16 82.06 64.4 8,790 2,940 10.3 5.98 720 233 6.76 0.880 805 358
250 x 250248 x 249 8 13 16 84.7 66.5 9,930 3,350 10.8 6.29 801 269 6.84 0.766 883 408
250 x 250 9 14 16 92.18 72.4 10,800 3,650 10.8 6.29 867 292 6.87 0.715 960 444
250 x 255 14 14 16 104.7 82.2 11,500 3,880 10.5 6.09 919 304 6.9 0.700 1,040 468
300 x 150298 x 149 5.5 8 13 40.8 32.0 6,320 442 12.4 3.29 424 59.3 3.84 2.500 475 91.8
300 x 150 6.5 9 13 46.78 36.7 7,210 508 12.4 3.29 481 67.7 3.87 2.220 542 105
300 x 200294 x 200 8 12 18 72.38 56.8 11,300 1,600 12.5 4.71 771 160 5.32 1.220 859 247
298 x 201 9 14 18 83.36 65.4 13,300 1,900 12.6 4.77 893 189 5.38 1.060 1,000 291
294 x 302 12 12 18 107.7 84.5 16,900 5,520 12.5 7.16 1,150 365 8.09 0.812 1,280 560
298 x 299 9 14 18 110.8 87.0 18,800 6,240 13 7.5 1,270 417 8.19 0.712 1,390 634
300 x 300 10 15 18 119.8 94.0 20,400 6,750 13.1 7.51 1,360 450 8.23 0.666 1,500 684
300 x 300 300 x 305 15 15 18 134.8 106.0 21,500 7,100 12.6 7.26 1,440 466 8.23 0.656 1,610 716
304 x 301 11 17 18 134.8 106.0 23,400 7,730 13.2 7.57 1,540 514 8.29 0.593 1,710 781
310 x 305 15 20 18 165.3 130.0 28,150 9,460 13.2 7.6 1,810 620 8.39 0.508 2,080 949
310 x 310 20 20 18 180.8 142.0 29,390 9,940 12.8 7.5 1,890 642 8.44 0.500 2,200 992
NominalSize(mm)
Standard SectionalDimension(mm)
H x B t1 t2 r A W Ix Iy ix iy Sx Sy rT H/Af Zx Zy Cw J
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
FlexibleProperties(cm)(cm-1)
PlasticModulus(cm3)
WarpingConstant(cm6)
TorsionalConstant(cm4)
KS D 3503, 3515/3502
Steel Casting Products
Ingots for Forging
Cast Rolls for Rolling Mill
max. 180 ton
max. 80 ton
Static Castingmax. 60 tonmax. 1600
Centrifugal Casting Rolls: max.1500 x max. 60 ton
Sleeves: max. 1900 x 1100mm(Length)
Pitch 135 ~ 228
Pitch 135 ~ 228 (6T ~ 16T)
35 x 100 ~ 60 x 150
5 ton ~ 45 ton
Link Assembly
Shoe
Fork
Roller
SC SCMn, SCMnH,SCMnCr
SF, SCMSNCM, SCr, SFVA
Low Carbon SteelHigh Carbon Steel
Ductile Definite Chilled
Indefinite Chilled High Chromium High Speed Steel
15B37M
15B23M
15B37M
15B37M
JIS Spec.
JIS Spec.
Hot Strip MillSection Mill Plate Mill Beam Mill Bar Mill
Link Pitch
Link Pitch
1ton ~ 5ton
Designation
Capacity
Material
Applicable Standards
Products Tables
(W
ideFlange
Beam
s)
H(Products
Guide)
T13A060 ~ T21D110Track Shoe 15B 26cr USER Spec.
2,830 5.17
9,870 8.43
2,530 2.81
7,270 7.37
27,600 13.5
10,400 3.86
12,300 5.77
43,400 10.9
142,000 29.8
150,000 39.6
203,000 66.7
36,700 6.74
42,700 9.68
134,000 23.2
399,000 39.5
462,000 46.7
508,000 58.7
540,000 79.0
92,900 8.65
107,000 12.4
319,000 35.8
383,000 53.4
1,097,000 61.4
1,258,000 71.3
1,372,000 88.1
1,443,000 116
1,592,000 125
1,991,000 215
2,093,000 271
-
Products Guide HYUNDAI STEEL
NominalSize(mm)
Standard SectionalDimension(mm)
H x B t1 t2 r A W Ix Iy ix iy Sx Sy rt H/Af Zx Zy Cw J
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
FlexibleProperties(cm)(cm-1)
PlasticModulus(cm3)
WarpingConstant(cm6)
TorsionalConstant(cm4)
346 x 174 6 9 14 52.68 41.4 11,100 792 14.5 3.88 641 91 4.51 2.210 716 140
350 x 175 350 x 175 7 11 14 63.14 49.6 13,600 984 14.7 3.95 775 112 4.58 1.820 868 174
354 x 176 8 13 14 73.68 57.8 16,100 1,180 14.8 4.01 909 134 4.65 1.550 1.020 208
340 x 250336 x 249 8 12 20 88.15 69.2 18,500 3,090 14.5 5.92 1,100 248 6.63 1.130 1,220 380
340 x 250 9 14 20 101.5 79.7 21,700 3,650 14.6 6.00 1,280 292 6.71 0.972 1,410 447
338 x 351 13 13 20 135.3 106 28,200 9,380 14.4 8.33 1,670 534 9.42 0.740 1,850 872
344 x 348 10 16 20 146 115 33,300 11,200 15.1 8.78 1,940 646 9.56 0.618 2,120 980
350 x 350 344 x 354 16 16 20 166.6 131 35,300 11,800 14.6 8.43 2,050 669 9.54 0.608 2,250 1,020
350 x 350 12 19 20 173.9 137 40,300 13,600 15.2 8.84 2,300 776 9.65 0.526 2,550 1,180
350 x 357 19 19 20 191.4 156 42,800 14,400 14.7 8.53 2,450 809 9.68 0.515 2,760 1,240
396 x 199 7 11 16 72.16 56.6 20,000 1,450 16.7 4.48 1,010 145 5.19 1.810 1,130 224
400 x 200 400 x 200 8 13 16 84.12 66 23,700 1,740 16.8 4.54 1,190 174 5.26 1.540 1,330 268
404 x 201 9 15 16 96.16 75.5 27,500 2,030 16.9 4.6 1,360 202 5.32 1.340 1,530 312
400 x 300386 x 299 9 14 22 120.1 94.3 33,700 6,240 16.7 7.81 1,740 418 8.02 0.923 1,920 637
390 x 300 10 16 22 136 107 38,700 7,210 16.9 7.28 1,980 481 8.09 0.813 2,190 733
388 x 402 15 15 22 178.5 140 49,000 16,300 16.6 9.54 2,520 809 10.8 0.643 2,800 1,240
394 x 398 11 18 22 186.8 147 56,100 18,900 17.3 10.1 2,850 951 10.9 0.552 3,120 1,440
394 x 405 18 18 22 214.4 168 59,700 20,000 16.7 9.65 3,030 985 11 0.536 3,390 1,510
400 x 400 13 21 22 218.7 172 66,600 22,400 17.5 10.1 3,330 1,120 11.1 0.473 3,670 1,700
400 x 400 400 x 408 21 21 22 250.7 197 70,900 23,800 16.8 9.75 3,540 1,170 11.1 0.465 3,990 1,790
406 x 403 16 24 22 254.9 200 78,000 26,200 17.5 10.1 3,840 1,300 11.2 0.417 4,280 1,980
414 x 405 18 28 22 295.4 232 92,800 31,000 17.7 10.2 4,480 1,530 11.4 0.360 5,030 2,330
428 x 407 20 35 22 360.7 283 119,000 39,400 18.2 10.4 5,570 1,930 11.8 0.290 6,310 2,940
458 x 417 30 50 22 528.6 415 187,000 60,500 18.8 10.7 8,170 2,900 11.8 0.219 9,540 4,440
498 x 432 45 70 22 770.1 605 298,000 94,000 19.7 11.1 13,000 4,370 12.3 0.165 14,400 6,720
450 x 200446 x 199 8 12 18 84.3 66.2 28,700 1,580 18.5 4.33 1,290 159 5.11 1.870 1,450 247
450 x 200 9 14 18 96.76 76 33,500 1,870 18.6 4.4 1,490 187 5.18 1.610 1,680 291
450 x 300434 x 299 10 15 24 135 106 46,800 6,690 18.6 7.04 2,160 448 7.94 0.967 2,380 686
440 x 300 11 18 24 157.4 124 56,100 8,110 18.9 7.18 2,550 541 8.05 0.815 2,820 828
225,000 13.6
283,000 23.0
344,000 36.1
811,000 44.6
970,000 66.3
2,477,000 90.3
3,024,000 121
3,186,000 164
3,721,000 199
3,953,000 270
536,000 27.1
650,000 42.2
769,000 62.3
2,160,000 79.9
2,521,000 114
5,655,000 156
6,688,000 194
7,053,000 264
8,048,000 303
8,550,000 415
9,558,000 462
11,557,000 714
15,198,000 1317
25,188,000 3885
43,214,000 11063
744,000 38.3
889,000 56.9
2,937,000 104
3,611,000 163
496 x 199 9 14 20 101.3 79.5 41,900 1,840 20.3 4.27 1,690 185 5.08 1.780 1,910 290
500 x 200 500 x 200 10 16 20 114.2 89.6 47,800 2,140 20.5 4.33 1,910 214 5.14 1.560 2,180 335
506 x 201 11 19 20 131.3 103 56,500 2,580 20.7 4.43 2,230 254 5.23 1.330 2,540 401
500 x 300482 x 300 11 15 26 145.5 114 60,400 6,760 20.4 6.82 2,500 451 7.83 1.070 2,790 695
488 x 300 11 18 26 163.5 128 71,000 8,110 20.8 7.04 2,910 541 7.97 0.903 3,230 830
596 x 199 10 15 22 120.5 94.6 68,700 1,980 23.9 4.05 2,310 199 4.95 2.000 2,650 315
600 x 200600 x 200 11 17 22 134.4 106 77,600 2,280 24 4.12 2,590 228 5.01 1.770 2,980 361
606 x 201 12 20 22 152.5 120 90,400 2,720 24.3 4.22 2,980 271 5.11 1.510 3,430 429
612 x 202 13 23 22 170.7 134 103,000 3,180 24.6 4.31 3,380 314 5.19 1.320 3,890 498
582 x 300 12 17 28 174.5 137 103,000 7,670 24.3 6.63 3,530 511 7.74 1.140 3,960 793
600 x 300 588 x 300 12 20 28 192.5 151 118,000 9,020 24.8 6.85 4,020 601 7.87 0.980 4,490 928
594 x 302 14 23 28 222.4 175 137,000 10,600 24.9 6.9 4,620 701 7.96 0.856 5,200 1,080
692 x 300 13 20 28 211.5 166 172,000 9,020 28.6 6.53 4,980 602 7.71 1.150 5,630 936
700 x 300 700 x 300 13 24 28 235.5 185 201,000 10,800 29.3 6.78 5,760 722 7.86 0.973 6,460 1,120
708 x 302 15 28 28 273.6 215 237,000 12,900 29.4 6.86 6,700 853 7.97 0.837 7,560 1,320
792 x 300 14 22 28 243.4 191 254,000 9,930 32.3 6.39 6,410 662 7.65 1.200 7,290 1,040
800 x 300 800 x 300 14 26 28 267.4 210 292,000 11,700 33 6.62 7,290 782 7.8 1.030 8,240 1,220
808 x 302 16 30 28 307.6 241 339,000 13,800 33.2 6.7 8,400 915 7.89 0.892 9,530 1,430
890 x 299 15 23 18 266.8 210 339,000 10,300 35.6 6.2 7,610 687 7.51 1.290 8,910 1,080
900 x 300900 x 300 16 28 18 305.8 240 404,000 12,600 36.4 6.43 8,990 842 7.68 1.070 10,500 1,320
912 x 302 18 34 18 360.1 283 491,000 15,700 36.9 6.56 10,800 1,040 7.84 0.888 12,500 1,630
918 x 303 19 37 18 387.4 304 535,000 17,200 37.2 6.67 11,700 1,140 7.8 0.819 13,400 1,780
NominalSize(mm)
Standard SectionalDimension(mm)
H x B t1 t2 r A W Ix Iy ix iy Sx Sy rt H/Af Zx Zy Cw J
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
FlexibleProperties(cm)(cm-1)
PlasticModulus(cm3)
WarpingConstant(cm6)
TorsionalConstant(cm4)
1,072,000 60.8
1,254,000 85.9
1,530,000 132
3,688,000 118
4,481,000 172
1,671,000 82.4
1,936,000 113
2,336,000 167
2,755,000 237
6,121,000 173
7,275,000 241
8,628,000 356
10,189,000 260
12,367,000 383
14,897,000 588
14,720,000 341
17,569,000 486
20,902,000 726
19,308,000 361
24,015,000 580
30,169,000 979
33,391,000 1234
17
(W
ideFlange
Beam
s)
H
16
(W
ideFlange
Beam
s)
H
-
NominalSize(inch)
Standard SectionalDimension(mm)
H x B t1 t2 r A Ix Iy ix iy Sx Sy rt H/Af Zx Zy Cw J
SectionalArea(cm2)
Unit Weight(lbs/ft)(kg/m)
2 Moment of Inertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
FlexibleProperties(cm)(cm-1)
PlasticModulus(cm3)
WarpingConstant(cm6)
TorsionalConstant(cm4)
(2) Inch Series
Products Guide HYUNDAI STEEL
19
(W
ideFlange
Beam
s)
H
18
(W
ideFlange
Beam
s)
H
49 72.92 253.5 x 254.0 8.64 14.22 12.7 92.9 11,300 3,890 11.0 6.45 895 306
54 80.36 256.3 x 254.8 9.40 15.62 12.7 101.9 12,600 4,290 11.1 6.50 983 338
60 89.29 259.6 x 256.0 10.67 17.27 12.7 113.5 14,200 4,830 11.2 6.53 1,090 377
68 101.2 264.2 x 257.3 11.94 19.56 12.7 129.0 16,400 5,580 11.3 6.58 1,240 433
77 114.6 269.2 x 588.8 13.46 22.10 12.7 145.8 18,900 6,410 11.4 6.60 1,410 493
88 131.0 275.3 x 260.7 15.37 25.15 12.7 167.1 22,200 7,450 11.5 6.68 1,610 570
100 148.8 281.9 x 262.6 17.27 28.45 12.7 189.70 25,900 8,620 11.70 6.73 1,840 655
14 20.83 302.5 x 100.8 5.08 5.72 7.6 26.84 3,690 98.2 11.7 1.91 244 19.5
16 23.81 304.5 x 101.3 5.59 6.73 7.6 30.39 4,290 117 11.9 1.96 280 23.1
19 28.28 308.9 x 101.7 5.97 8.89 7.6 35.94 5,410 157 12.2 2.09 349 30.8
22 32.74 312.7 x 102.4 6.60 10.80 7.6 41.81 6,490 194 12.5 2.15 416 37.9
26 38.69 310.4 x 164.8 5.84 9.65 7.6 49.35 8,400 720 13.1 3.84 547 87.5
30 44.64 313.4 x 165.6 6.60 11.18 7.6 56.71 9,910 840 13.2 3.86 633 102
35 52.09 317.5 x 166.6 7.62 13.21 7.6 66.46 11,900 1,020 13.3 3.91 747 122
40 59.53 303.3 x 203.3 7.49 13.08 15.2 76.13 12,900 1,840 13.0 4.90 850 180
45 66.97 306.3 x 204.3 8.51 14.60 15.2 85.16 14,600 2,080 13.1 4.93 952 203
50 74.41 309.6 x 205.2 9.40 16.26 15.2 94.84 16,400 2,340 13.2 4.98 1,060 228
53 78.87 306.3 x 253.9 8.76 14.60 15.2 100.6 17,700 3,990 13.3 6.30 1,160 315
58 86.31 309.6 x 254.3 9.14 16.26 15.2 109.7 19,800 4,450 13.4 6.38 1,280 351
65 96.73 307.8 x 304.8 9.91 15.37 15.2 123.2 22,200 7,240 13.4 7.67 1,440 477
72 107.1 311.2 x 305.8 10.92 17.02 15.2 136.1 24,800 8,120 13.5 7.72 1,600 531
79 117.6 314.5 x 306.8 11.94 18.67 15.2 149.7 27,600 8,990 13.6 7.75 1,450 587
87 129.5 318.3 x 308.0 13.08 20.51 15.2 165.2 30,800 10,000 13.7 7.80 1,930 651
96 142.9 322.8 x 308.9 13.97 22.86 15.2 181.9 34,700 11,200 13.8 7.85 2,150 728
106 157.7 327.4 x 310.4 15.49 25.15 15.2 201.3 38,800 12,500 13.9 7.90 2,380 808
120 178.6 333.2 x 312.9 18.03 28.07 15.2 227.7 44,500 14,400 14.0 7.95 2,670 918
22 32.74 349.0 x 127.0 5.84 8.51 10.2 41.87 8,280 291 14.1 2.64 475 45.9
26 38.69 353.3 x 127.6 6.48 10.67 10.2 49.61 10,200 371 14.4 2.74 578 58.0
30 44.64 351.5 x 170.9 6.86 9.78 10.2 57.10 12,100 816 14.6 3.78 688 95.4
34 50.60 355.1 x 171.3 7.24 11.56 10.2 64.52 14,200 970 14.8 3.89 796 113
38 56.55 358.1 x 172.0 7.87 13.08 10.2 72.26 16,000 1,110 14.9 3.94 895 129
43 63.99 347.0 x 203.1 7.75 13.46 15.2 81.29 17,800 1,880 14.8 4.80 1,030 185
48 71.43 350.3 x 204.0 8.64 15.11 15.2 90.97 20,200 2,140 14.9 4.85 1,150 210
53 78.9 353.5 x 204.7 9.40 16.76 15.2 100.60 22,500 2,400 15.00 4.88 1,270 234
W1010 x 10
W1212 x 4
W1212 x 6
W1212 x 8
W1212 x 10
W1212 x 12
W1414 x 5
W1414 x 6
W1414 x 8
13 19.35 105.7 x 103.1 7.11 8.76 6.4 24.71 470 161 4.37 2.54 89.5 31.1
16 23.81 127.3 x 127.0 6.10 9.14 7.6 30.39 891 313 5.41 3.20 140 49.2
19 28.28 130.8 x 127.8 6.86 10.92 7.6 35.87 1,090 380 5.51 3.25 167 59.5
9 13.4 149.9 x 100.1 4.32 5.46 6.4 17.29 683 91.6 6.27 2.30 91.1 18.2
12 17.86 153.2 x 101.6 5.84 7.11 6.4 22.90 920 124 6.32 2.33 120 24.6
16 23.81 159.5 x 102.4 6.60 10.29 6.4 30.58 1,340 184 6.60 2.46 167 36.1
15 22.32 152.1 x 152.1 5.81 6.60 6.4 28.58 1,210 388 6.50 3.68 159 51.0
20 29.76 157.5 x 152.9 6.60 9.27 6.4 37.87 1,720 554 6.76 3.81 220 72.3
25 37.20 162.1 x 154.4 8.13 11.56 6.4 47.35 2,220 712 6.86 3.86 274 91.9
10 14.9 200.4 x 100.1 4.32 5.21 7.6 19.10 1,280 87 8.18 2.14 128 17.4
13 19.35 202.9 x 101.6 5.84 6.48 7.6 24.77 1,650 114 8.15 2.14 162 22.5
15 22.32 206.0 x 102.6 6.22 8.00 7.6 28.65 2,000 142 8.36 2.23 193 27.9
18 26.79 206.8 x 133.4 5.84 8.38 7.6 33.94 2,580 332 8.71 3.12 249 49.8
21 31.25 210.3 x 133.9 6.35 10.16 7.6 39.74 3,130 407 8.86 3.20 298 60.8
24 35.72 201.4 x 165.0 6.22 10.16 10.2 45.68 3,450 762 8.69 4.09 342 92.3
28 41.67 204.7 x 166.0 7.24 11.81 10.2 53.23 4,080 903 8.76 4.11 398 109.0
31 46.13 203.2 x 203.1 7.24 11.05 10.2 59.90 4,580 1,540 8.81 5.13 451 152
35 52.09 206.2 x 203.7 7.87 12.57 10.2 66.45 5,290 1,770 8.92 5.16 511 174
40 59.53 209.6 x 205.0 9.14 14.22 10.2 75.48 6,080 2,040 8.97 5.18 582 200
48 71.43 215.9 x 206.0 10.16 17.40 10.2 90.97 7,660 2,530 9.17 5.28 710 246
58 86.31 222.2 x 208.8 12.95 20.57 10.2 110.3 9,490 3,130 9.27 5.33 852 300
67 99.7 228.6 x 210.3 14.48 23.75 10.2 127.10 11,300 3,690 9.45 5.38 990 351
12 17.9 250.7 x 100.6 4.83 5.33 7.6 22.84 2,240 90.7 9.91 1.99 179 18
15 22.32 253.7 x 101.6 5.84 6.86 7.6 28.45 2,870 120 10.0 2.06 226 23.8
17 25.30 256.8 x 101.9 6.10 8.38 7.6 32.19 3,410 148 10.3 2.15 265 29.2
19 28.28 260.1 x 102.1 6.35 10.03 7.6 36.26 4,010 179 10.5 2.22 308 35.1
22 32.74 258.3 x 146.0 6.10 9.14 7.6 41.87 4,910 475 10.8 3.38 380 65.1
26 38.69 262.4 x 146.6 6.60 11.18 7.6 49.10 5,990 587 11.0 3.45 457 80.1
30 44.64 265.9 x 147.6 7.62 12.95 7.6 57.03 7,080 695 11.1 3.48 531 94.2
33 49.11 247.1 x 202.2 7.37 11.05 12.7 62.64 7,080 1,520 10.6 4.93 574 151
39 58.04 252.0 x 202.8 8.00 13.46 12.7 74.19 8,700 1,870 10.8 5.03 690 185
45 66.97 256.5 x 203.7 8.89 15.75 12.7 85.81 10,300 2,220 11.0 5.11 805 218
Note : Metric .
W44 x 4
W55 x 5
W66 x 4
W66 x 6
W88 x 4
W88 x 5
W88 x 6
W88 x 8
W1010 x 4
W1010 x 5
W1010 x 8
2.79
3.48
3.51
2.62
2.67
2.74
4.09
4.17
4.22
2.51
2.57
2.62
3.53
3.58
4.47
4.50
5.54
5.59
5.61
5.66
5.74
5.79
2.44
2.51
2.57
2.62
3.84
3.91
3.94
5.44
5.49
5.54
1.17
1.09
0.94
2.74
2.12
1.52
1.52
1.11
0.91
3.85
3.08
2.52
1.85
1.55
1.20
1.04
0.91
0.81
0.72
0.60
0.52
0.46
4.69
3.64
3.00
2.54
1.93
1.60
1.39
1.11
0.92
0.80
102.9
157.2
190.1
102.1
136.0
191.7
177.0
244.2
309.7
145.4
186.8
222.9
278.6
334.3
380.2
445.7
498.2
568.6
652.2
803.0
979.9
1150.4
206.5
262.2
306.4
354.0
426.1
512.9
599.8
635.8
766.9
899.6
47.9
74.9
90.6
28.2
38.0
55.6
77.8
110.1
140.3
27.2
35.2
43.8
76.4
93.2
140.4
165.5
231.1
263.8
303.2
375.3
457.2
535.9
28.5
37.7
45.9
54.9
100.0
122.9
144.9
229.4
281.9
332.7
3,760
10,903
13,668
4,780
6,633
10,258
20,543
30,345
40,280
8,298
10,956
13,910
32,761
40,817
69,551
84,052
142,593
166,224
194,957
249,738
316,872
386,692
13,668
18,341
22,852
27,928
73,579
92,645
111,174
212,412
266,388
322,243
6.29
7.99
13.2
1.69
3.76
9.28
4.37
10.2
19.6
1.77
3.63
5.70
7.16
11.7
14.4
22.4
22.3
32.0
46.6
81.6
139
210
2.28
4.33
6.49
9.70
9.95
16.7
25.9
24.3
40.6
62.9
6.96
0.70
7.04
7.09
7.11
7.19
7.24
2.41
2.44
2.54
2.59
4.37
4.40
4.42
5.44
5.46
5.51
6.88
6.91
8.33
8.36
8.41
8.43
8.48
8.53
8.59
3.18
3.25
4.42
4.47
4.50
5.38
5.41
5.50
0.70
0.65
0.59
0.52
0.47
0.42
0.38
5.24
4.45
3.41
2.83
1.95
1.69
1.44
1.14
1.03
0.93
0.83
0.75
0.66
0.60
0.55
0.50
0.46
0.42
0.38
3.23
2.59
2.10
1.80
1.59
1.27
1.14
1.03
989.8
1091.4
1222.4
1397.8
1599.4
1851.7
2130.3
285.1
329.4
404.8
480.1
609.6
706.3
839.0
942.3
1060.2
1186.4
1276.6
1415.8
1586.3
1769.8
1950.1
2163.1
2408.9
2687.5
3048.0
544.1
658.8
775.1
894.7
1007.8
1140.5
1284.7
1427.3
463.8
512.9
573.5
657.1
752.2
870.2
999.6
31.1
37.0
48.8
60.0
133.9
156.7
188.5
275.3
311.4
350.7
476.9
532.6
722.7
806.2
889.8
989.8
1106.1
1230.7
1399.5
71.9
90.8
147.3
173.7
198.3
283.5
321.2
360.5
555,869
620,318
708,935
835,147
977,471
1,165,446
1,382,960
21,644
26,021
35,178
44,308
162,733
193,077
236,043
386,692
443,084
504,847
848,573
958,673
1,549,452
1,756,225
1,965,683
2,223,477
2,526,923
2,873,334
3,356,698
84,320
108,757
238,191
287,333
330,299
523,645
601,520
682,081
57.9
75.8
103
148
213
313
454
2.93
4.29
7.49
12.2
12.5
19.0
30.8
37.7
52.4
71.2
65.8
87.4
90.7
122
160
212
285
380
537
8.66
14.9
15.8
23.7
33.2
43.7
60.4
80.7
NominalSize(inch)
Standard SectionalDimension(mm)
H x B t1 t2 r A Ix Iy ix iy Sx Sy rt H/Af Zx Zy Cw J
SectionalArea(cm2)
Unit Weight(lbs/ft)(kg/m)
2 Moment of Inertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
FlexibleProperties(cm)(cm-1)
PlasticModulus(cm3)
WarpingConstant(cm6)
TorsionalConstant(cm4)
-
NominalSize(inch)
Standard SectionalDimension(mm)
H x B t1 t2 r A Ix Iy ix iy Sx Sy rt H/Af Zx Zy Cw J
SectionalArea(cm2)
Unit Weight(lbs/ft)(kg/m)
2 Moment of Inertia(cm4)
2 Radius ofGyration(cm)
Modulus of Section(cm3)
FlexibleProperties(cm)(cm-1)
PlasticModulus(cm3)
WarpingConstant(cm6)
TorsionalConstant(cm4)
Products Guide HYUNDAI STEEL
21
(W
ideFlange
Beam
s)
H
20
(W
ideFlange
Beam
s)
H
97 144.4 472.2 x 283.1 13.59 22.10 10.2 183.9 72,800 8,370 19.9 6.73 3,080 692
106 157.7 475.7 x 284.5 14.99 23.88 10.2 200.6 79,500 9,160 19.9 6.76 3,340 646
119 177.1 481.8 x 286.1 16.64 26.92 10.2 226.5 91,200 10,500 20.1 6.83 3,790 736
130 193.5 489.0 x 283.5 17.02 30.48 10.2 246.5 102,400 11,570 20.40 6.86 4,190 817
44 65.48 524.8 x 165.1 8.89 11.43 12.7 83.87 35,100 862 20.5 3.20 1,340 104
50 74.41 529.1 x 165.9 9.65 13.59 12.7 94.84 41,000 1,040 20.8 3.30 1,550 125
57 84.83 534.9 x 166.5 10.29 16.51 12.7 107.7 48,700 1,270 21.2 3.43 1,820 153
62 92.27 533.1 x 209.3 10.16 15.62 12.7 118.1 55,400 2,390 21.7 4.50 2,080 228
68 101.2 536.7 x 210.1 10.92 17.40 12.7 129.0 61,600 2,690 21.8 4.57 2,290 257
73 108.6 539.5 x 210.7 11.56 18.80 12.7 138.7 66,600 2,940 21.9 4.60 2,470 279
83 123.5 544.3 x 212.2 13.08 21.21 12.7 156.8 76,200 3,390 22.0 4.65 2,800 320
93 138.4 549.1 x 213.9 14.17 23.62 12.7 176.1 86,200 3,870 22.1 4.67 3,150 362
101 150.3 542.5 x 312.2 12.70 20.32 12.7 192.3 101,000 10,300 22.9 7.34 3,720 660
111 165.2 546.4 x 313.4 13.97 22.22 12.7 211.0 111,000 11,400 23.0 7.37 4,080 729
122 181.6 550.7 x 314.7 15.24 24.38 12.7 231.6 123,000 12,700 23.1 7.42 4,470 806
132 196.4 554.5 x 316.0 16.51 26.29 12.7 250.3 134,000 13,900 23.2 7.44 4,830 877
55 81.85 598.7 x 1747.9 10.03 12.83 12.7 104.5 56,200 1,210 23.1 3.40 1,870 136
62 92.27 554.5 x 316.0 10.92 14.99 12.7 117.4 64,500 1,440 23.4 3.51 2,150 161
68 101.2 602.7 x 227.7 10.54 14.86 12.7 129.7 76,200 2,930 24.3 4.75 2,250 257
76 113.1 607.6 x 228.3 11.18 17.27 12.7 144.5 87,400 2,430 24.6 4.88 2,280 302
84 125.0 612.1 x 229.1 11.94 19.56 12.7 159.4 98,600 3,930 24.9 4.95 3,210 342
94 139.9 917.5 x 230.3 13.08 22.22 12.7 178.7 112,000 4,540 25.1 5.03 3,640 393
104 158.8 611.1 x 323.8 12.70 19.05 12.7 197.4 129,000 10,800 25.7 7.39 4,230 667
117 174.1 616.2 x 325.1 13.97 21.59 12.7 221.9 147,000 12,400 25.7 7.47 4,770 762
131 194.9 621.8 x 326.5 15.37 24.38 12.7 248.4 167,000 14,200 25.9 7.54 5,390 869
146 217.3 628.4 x 327.7 16.51 27.69 12.7 277.4 191,000 16,300 26.2 7.65 6,080 991
84 125.0 678.4 x 253.0 11.68 16.26 15.2 160.0 119,000 4,410 27.2 5.26 3,490 347
94 139.9 683.8 x 253.7 12.45 18.92 15.2 178.7 136,000 5,160 27.7 5.38 3,980 406
102 151.8 688.1 x 254.4 13.08 21.08 15.2 193.5 151,000 5,790 27.9 5.46 4,380 456
114 169.7 693.2 x 255.8 14.48 23.62 15.2 216.1 170,000 6,620 27.9 5.54 4,900 516
W1818 x 11
W2121 x 6
W2121 x 8
W2121x12
W2424 x 7
W2424 x 9
W2424x12
W2727 x 10
61 90.78 352.8 x 253.9 9.52 16.38 15.2 115.5 26,600 4,450 15.2 6.22 1,510 352
68 101.2 356.6 x 254.9 10.54 18.29 15.2 129.0 30,100 5,040 15.3 6.25 1,690 397
74 110.1 359.9 x 255.8 11.43 19.94 15.2 140.6 33,100 5,580 15.3 6.30 1,840 436
82 122.0 363.5 x 257.3 12.95 21.72 15.2 155.5 36,700 6,160 15.4 6.30 2,020 480
90 133.9 356.1 x 368.8 11.18 18.03 15.2 171.0 41,600 15,100 15.6 9.40 2,340 818
99 147.3 359.7 x 370.0 12.32 19.81 15.2 187.7 46,200 16,700 15.7 9.42 2,570 905
109 162.2 363.7 x 371.0 13.34 21.84 15.2 206.5 51,600 18,600 15.8 9.47 2,830 1,000
120 178.6 367.8 x 372.6 14.99 23.88 15.2 227.7 57,400 20,600 15.8 9.50 3,110 1,110
132 196.4 372.4 x 374.0 16.38 26.16 15.2 250.3 63,700 22,800 16.0 9.55 3,420 1,220
26 38.96 398.5 x 137.7 6.35 8.76 15.2 49.55 12,500 399 15.9 2.84 629 57.2
31 49.13 403.4 x 140.3 6.98 11.18 15.2 58.84 15,600 516 16.3 2.97 773 73.6
36 53.57 402.8 x 177.4 7.49 10.92 10.2 68.39 18,600 1,020 16.5 3.86 926 115
40 59.53 406.7 x 177.7 7.75 12.83 10.2 76.13 21,600 1,200 16.8 3.99 1,060 135
45 66.97 409.7 x 178.7 8.76 14.35 10.2 85.81 24,400 1,370 16.9 3.99 1,190 153
50 74.41 413.0 x 179.6 9.65 16.00 10.2 94.84 27,400 1,550 17.0 4.04 1,330 172
57 84.83 417.3 x 180.8 10.92 18.16 10.2 108.4 31,600 1,790 17.1 4.06 1,510 198
67 99.71 414.8 x 260.0 10.03 16.89 10.2 127.1 39,700 4,950 17.7 6.25 1,920 380
77 114.6 419.6 x 261.5 1156 19.30 10.2 145.8 46,200 5,740 17.8 6.27 2,220 441
89 132.4 425.4 x 263.3 13.33 22.22 10.2 169.0 54,100 6,780 17.9 6.32 2,540 515
100 148.8 431.0 x 264.8 14.86 25.02 10.2 189.7 62,000 7,740 18.0 6.40 2,870 585
35 52.09 449.6 x 152.4 7.62 10.80 10.2 66.45 21,200 637 17.9 3.10 944 84
40 59.53 454.7 x 152.8 8.00 13.34 10.2 76.13 25,500 795 18.3 3.23 1,120 104
46 68.46 458.7 x 153.9 9.14 15.37 10.2 87.10 29,600 937 18.4 3.28 1,290 122
50 74.41 456.9 x 190.4 9.02 14.48 10.2 94.84 33,300 1,670 18.7 4.19 1,460 175
55 81.85 460.0 x 191.3 9.91 16.00 10.2 104.5 37,000 1,870 18.8 4.24 1,610 195
60 89.29 463.3 x 191.9 10.54 17.65 10.2 113.5 41,000 2,090 19.0 4.29 1,770 218
65 96.73 466.1 x 192.8 11.43 19.05 10.2 123.2 44,500 2,280 19.0 4.29 1,920 236
71 105.7 469.1 x 193.9 12.57 20.57 10.2 134.2 48,700 2,510 19.0 4.32 2,080 259
76 113.1 462.5 x 280.3 10.80 17.27 10.2 143.9 55,400 6,330 19.6 6.63 2,390 452
86 128.0 467.1 x 281.7 12.19 19.56 10.2 163.2 63,700 7,280 19.7 6.68 2,720 518
W1414 x 10
W1414x14
W1616 x 5
W1616 x 7
W1616x10
W1818 x 6
W1818 x 7
W18 18 x 11
NominalSize(inch)
Standard SectionalDimension(mm)
H x B t1 t2 r A Ix Iy ix iy Sx Sy rt H/Af Zx Zy Cw J
SectionalArea(cm2)
Unit Weight(lbs/ft)(kg/m)
2 Moment of Inertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
FlexibleProperties(cm)(cm-1)
PlasticModulus(cm3)
WarpingConstant(cm6)
TorsionalConstant(cm4)
6.86
6.88
6.91
6.96
10.13
10.16
10.21
10.26
10.29
3.45
3.53
4.55
4.62
4.65
4.67
4.72
6.99
7.04
7.09
7.14
3.78
3.86
3.91
4.93
4.95
4.98
5.00
5.03
7.49
7.54
0.85
0.76
0.70
0.65
0.54
0.49
0.45
0.41
0.38
3.26
2.57
2.08
1.78
1.60
1.44
1.27
0.94
0.83
0.73
0.65
2.73
2.23
1.94
1.66
1.50
1.37
1.27
1.18
0.96
0.85
1671.5
1884.5
2064.8
2277.8
2572.8
2835.0
3146.3
3474.1
3834.6
724.3
884.9
1048.8
1194.6
1348.7
1507.6
1720.6
2130.3
2458.1
2867.7
3244.6
1089.7
1284.7
1486.3
1655.1
1835.4
2015.6
2179.5
2376.1
2671.1
3048.0
537.5
604.7
665.3
734.1
1238.9
1370.0
1519.1
1671.5
1851.7
89.8
115.2
177.0
208.1
237.6
267.1
309.7
581.7
673.5
788.2
899.6
132.1
163.1
191.7
272.0
303.2
337.6
368.7
404.8
691.5
312.3
1,259,433
1,442,038
1,611,215
1,799,190
4,296,574
4,833,646
5,424,425
6,095,764
6,847,665
151,723
198,448
392,062
467,252
534,386
609,576
714,305
1,960,312
2,301,352
2,765,919
3,195,577
306,131
386,692
459,196
816,349
921,078
1,036,548
1,138,592
1,262,119
3,141,870
3,652,088
91.2
125
161
211
169
224
296
390
512
10.9
19.2
22.7
33.0
46.2
63.3
92.4
109
161
243
342
21.1
33.7
50.8
51.6
69.1
90.3
114
145
118
171
7.59
7.62
7.67
6.65
3.99
4.06
4.17
5.33
5.38
5.41
5.46
5.51
8.31
8.33
8.38
8.41
4.27
4.34
5.74
5.82
5.87
5.92
8.51
8.56
8.64
8.71
6.32
6.43
6.50
6.55
0.76
0.70
0.63
0.57
2.78
2.35
1.94
1.63
4.47
1.36
1.21
1.09
0.85
0.78
0.72
0.67
2.62
2.25
1.78
1.54
1.37
1.20
0.99
0.88
0.78
0.69
1.65
1.43
1.28
1.15
3457.7
3769.0
4277.0
4768.6
1563.3
1802.6
2113.9
2359.7
2621.9
2818.6
3211.9
3621.5
4146.0
4572.0
5030.8
5456.9
2195.9
2507.2
2900.5
3277.4
3670.7
4162.3
4735.9
5358.6
6063.2
6849.8
3998.4
4555.6
4998.0
5620.8
90.6.2
991.4
1132.4
1256.9
1671.1
199.9
242.5
355.6
399.8
435.9
499.8
568.6
1011.1
1117.6
1238.9
1348.7
217.9
257.3
401.5
468.7
534.2
614.5
1022.6
1170.0
1335.5
1527.3
544.1
635.8
711.2
807.8
4,242,867
4,672,524
5,451,278
6,068,911
566,611
687,452
856,629
1,603,159
1,815,302
1,992,536
2,317,465
2,669,247
7,035,640
7,841,247
8,781,123
9,667,291
1,039,234
1,240,636
2,532,293
2,980,748
3,437,259
4,028,038
9,452,463
10,929,410
12,621,186
14,688,912
4,833,646
5,692,960
6,444,861
7,411,590
244
311
441
604
32.0
47.5
73.7
76.2
102
126
181
251
217
284
374
470
51.6
73.7
77.8
112
154
219
196
280
395
558
117
168
220
305
-
Products Guide HYUNDAI STEEL
23
(Asym
metric
H-B
eams)
H
22
(H
-Bearing
Piles)
H
4. Checkered H-Beams H()
Dimensions and Sectional Properties
190 x 197 190 x 197 5 7 13 39.94 32.6 312 99.2
NominalSize(mm)
Standard SectionalDimension(mm)
H x B t1 t2 r A W Sx Sy
SectionalArea(cm2)
Unit Weight(kg/m)
Modulus ofSection(cm3)
Dimensions and Sectional Properties
336x240x350 18 30 22 230.8 181 44,354 14,197 13.9 7.8 14.6
328x238x348 16 26 22 200.7 158 37,437 12,069 13.7 7.8 14.2
320x236x346 14 22 22 170.8 134 30,907 10,017 13.5 7.7 13.9
312x234x344 12 18 22 141.3 111 24,751 8,038 13.2 7.5 13.5
Standard SectionalDimension(mm)
tw tf r A W Ix Iy ix iy ye HxBtxBb
Unit Weight(kg/m)
SectionalArea(cm2)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Elestic NeutralAxis Position(cm)
2. H-Bearing Piles H Dimensions and Sectional Properties
(1) Metric Series KS D 3503, 3515 / KS F 4603
200 x 200 200 x 204 12 12 13 71.53 56.2 4,980 1,700 8.35 4.88 498 167 1.17
250 x 250244 x 252 11 11 16 82.06 64.4 8,790 2,940 10.3 5.98 720 233 1.45
250 x 255 14 14 16 104.7 82.2 11,500 3,880 10.5 6.09 919 304 1.46
294 x 302 12 12 18 107.7 84.5 16,900 5,520 12.5 7.16 1,150 365 1.74
300 x 300 300 x 300 10 15 18 119.8 94.0 20,400 6,750 13.1 7.51 1,360 450 1.75
300 x 305 15 15 18 134.8 106 21,500 7,100 12.6 7.26 1,440 466 1.76
338 x 351 13 13 20 135.3 106 28,200 9,380 14.4 8.33 1,670 534 2.02
350 x 350 344 x 354 16 16 20 166.6 131 35,300 1,800 14.6 8.43 2,050 669 2.04
350 x 350 12 19 20 173.9 137 40,300 13,600 15.2 8.84 2,300 776 2.04
350 x 357 19 19 20 198.4 156 42,800 14,400 14.7 8.53 2,450 809 2.06
388 x 402 15 15 22 178.5 140 49,000 16,300 16.6 9.54 2,520 809 2.32
394 x 405 18 18 22 214.4 168 59,700 20,000 16.7 9.65 3,030 985 2.33
400 x 400 400 x 400 13 21 22 218.7 172 66,600 22,400 17.5 10.1 3,330 1,120 2.34
400 x 408 21 21 22 250.7 197 70,900 23,800 16.8 9.75 3,540 1,170 2.35
414 x 405 18 28 22 295.4 232 92,800 31,000 17.1 10.2 4,480 1,530 2.37
428 x 407 20 35 22 360.7 283 119,000 39,400 18.2 104 5,570 1,930 2.41
NominalSize(mm)
Standard SectionalDimension(mm)
H x B t1 t2 r A W Ix Iy ix iy Sx Sy
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
SurfaceArea(m2/m)
(2) Inch Series
HP8 36 53.57 203.7 x 207.1 11.30 11.30 68.39 4,950 1,680 8.53 4.95 488 162 1.21
8 x 8
HP1042 62.50 246.4 x 255.9 10.45 10.67 80.0 8,740 2,980 10.5 6.12 711 233 1.47
10 x 1048 71.43 249.9 x 257.5 12.12 12.12 91.1 10,150 3,451 10.6 6.15 813 268 1.48
57 84.83 253.7 x 259.7 14.35 14.35 108.4 12,200 4,200 10.6 6.22 964 323 1.49
53 78.87 299.2 x 305.9 11.05 11.05 100.0 16,400 5,290 12.8 7.26 1,090 346 1.77
HP12 59 87.80 301.7 x 307.2 12.32 12.32 111.8 18,400 5,959 12.8 7.30 1,220 388 1.78
12 x 12 63 93.75 303.3 x 308.0 13.08 13.08 118.7 19,600 6,370 12.9 7.32 1,300 415 1.79
74 110.1 308.1 x 310.3 15.37 15.49 140.6 23,700 7,740 13.0 7.42 1,540 198 1.80
73 108 345.7 x 370.5 12.8 12.8 138.1 30,300 10,900 14.8 8.86 1,750 587 2.12
HP14 89 132 351.3 x 373.3 15.6 15.6 168.4 37,600 13,600 14.9 8.97 2,150 726 2.14
14 x 14 102 152 355.9 x 375.5 17.9 17.9 193.5 43,700 15,800 15.0 9.04 2,460 842 2.15117 174 360.9 x 378.1 20.4 20.4 211.9 50,800 18,400 15.1 9.12 2,820 975 2.16
NominalSize(inch)
UnitWeight
lbs/ft kg/m H x B t1 t2 A Ix Iy ix iy Sx Sy
Standard SectionalDimension(mm)
SectionalArea(cm2)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
SurfaceArea(m2/m)
336 x 240 x 350 2,336 3,035 811 7.6 2,955 1,379 2,447,064 636
328 x 238 x 348 2,018 2,627 694 7.5 2,533 1,178 2,018,371 424
320 x 236 x 346 1,707 2,225 579 7.4 2,125 983 1,624,487 265
312 x 234 x 344 1,402 1,828 467 7.3 1,732 793 1,263,539 153
Standard SectionalDimension(mm)
Sxt Sxb Sy yp Zx Zy H JHxBtxBb
Plastic Neutral Axis Position(cm)
Modulus ofElastic(cm3)
Modulus ofPlastic(cm3)
WarpingConstant(cm6)
TorisonalConstant(cm4)
3. Asymmetric H-Beams H
-
Products Guide HYUNDAI STEEL
25
(StructuralTees)
C.T.
24
(StructuralTees)
C.T.
NominalSize(mm)
Standard SectionalDimension(mm)
H x B t1 t2 r A W Ix Iy ix iy Sx Sy Cx
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
Center ofGravity(cm)
100 x 200 8 12 13 31.77 24.9 184 801 2.41 5.02 22.3 80.1 1.73
100 x 200 100 x 204 12 12 13 35.77 28.1 256 851 2.67 4.88 32.4 83.4 2.09
104 x 202 10 16 13 41.85 32.8 251 1,100 2.45 5.13 29.5 109 1.91
125 x 125124 x 124 5 8 12 16.34 12.8 208 127 3.57 2.79 21.3 20.5 2.63
125 x 125 6 9 12 18.83 12.8 248 147 3.63 2.79 25.6 23.5 2.78
125 x 175 122 x 175 7 11 16 28.12 22.1 289 492 3.20 4.18 29.1 56.3 2.27
122 x 252 11 11 16 41.03 32.2 445 1,470 3.29 5.98 45.3 117 2.39
125 x 250124 x 249 8 13 16 42.35 33.2 364 1,670 2.93 6.29 34.9 134 1.98
125 x 250 9 14 16 46.06 36.2 412 1,820 2.99 6.29 39.5 146 2.08
125 x 255 14 14 16 52.34 41.1 589 1,940 3.36 6.09 59.4 152 2.58
150 x 150149 x 149 5.5 8 13 20.40 16.0 393 221 4.39 3.29 33.8 29.7 3.26
150 x 150 6.5 9 13 23.39 18.4 464 254 4.45 3.29 40.0 33.8 3.41
150 x 200147 x 200 8 12 18 36.19 28.4 572 802 3.97 4.71 48.2 80.2 2.83
149 x 201 9 14 18 41.68 32.7 662 949 3.99 4.71 55.2 94.4 2.91
147 x 302 12 12 18 53.83 42.3 858 2,760 3.99 7.16 72.3 183 2.84
149 x 299 9 14 18 55.40 43.5 715 3,120 3.59 7.51 57.0 209 2.36
150 x 300 150 x 300 10 15 18 59.89 47.0 798 3,380 3.65 7.51 63.7 225 2.47
150 x 305 15 15 18 67.39 52.9 1,110 3,550 4.05 7.26 92.5 233 3.03
152 x 301 11 17 18 67.41 52.9 903 3,870 3.66 7.57 71.4 257 2.55
175 x 175173 x 174 6 9 14 26.34 20.7 679 396 5.08 3.88 50.0 45.5 3.71
175 x 175 7 11 14 31.57 24.8 815 492 5.08 3.95 59.3 56.2 3.75
175 x 250 168 x 249 8 12 20 44.08 34.6 881 1,540 4.47 5.92 64.0 124 3.02
170 x 250 9 14 20 50.76 39.8 1,020 1,830 4.48 6.00 73.1 146 3.09
172 x 348 10 16 20 73.00 57.3 1,230 5,620 4.11 8.78 84.7 323 2.67
172 x 354 16 16 20 83.32 65.4 1,800 5,920 4.65 8.43 131 335 3.40
175 x 350 175 x 350 12 19 20 86.94 68.2 1,520 6,790 4.18 8.84 104 388 2.86
175 x 357 19 19 20 99.19 77.9 2,200 7,220 4.71 8.53 158 404 3.59
169 x 351 13 13 20 67.63 53.1 1,420 4,690 4.59 8.33 104 267 3.21
200 x 200198 x 199 7 11 16 36.08 28.3 1,190 723 5.76 4.48 76.4 72.7 4.17
200 x 200 8 13 16 42.06 33.0 1,400 868 5.76 4.54 88.6 86.8 4.23
200 x 300 193 x 299 9 14 22 60.05 47.1 1,530 3,120 5.04 7.21 95.5 209 3.33
195 x 300 10 16 22 67.98 53.4 1,730 3,600 5.05 7.28 108 240 3.41
Note : (These sizes are not included in regular rolling schedules.)
6. Structural Tees C.T.
Dimensions and Sectional Properties
y
y
x x
50 x 100 50 x 100 6 8 10 10.95 8.6 16.1 66.9 1.21 2.47 4.03 13.4 1.00
62.5 x 125 62.5 x 125 6.5 9 10 15.16 11.9 35.0 147 1.52 3.11 6.91 23.5 1.19
75 x 75 75 x 75 5 7 8 8.925 7.01 42.6 24.7 2.18 1.66 7.46 6.59 1.79
75 x 100 75 x 100 6 9 11 13.42 10.5 51.7 75.3 1.96 2.37 8.84 15.1 1.55
75 x 150 75 x 150 7 10 11 20.07 15.8 66.4 282 1.82 3.75 10.8 37.6 1.37
100 x 100 100 x 100 5.5 8 11 13.58 10.7 114 67.0 2.90 2.22 14.8 13.4 2.29
100 x 150 97 x 150 6 9 13 19.51 15.3 125 254 2.53 3.61 15.8 33.8 1.79
Note : (These sizes are not included in regular rolling schedules.)
NominalSize(mm)
Standard SectionalDimension(mm)
H x B t1 t2 r A W Ix Iy ix iy Sx Sy Cx
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
Center ofGravity(cm)
5. Junior Beams H
Dimensions and Sectional Properties
150 x 75 150 75 3.2 4.5 5 9.01 11.48 442 31.7 6.21 1.66 59.0 8.45
150 x 100 150 100 3.2 4.5 5 10.8 13.73 562 75.1 6.40 2.34 74.9 15.0
175 x 90 175 90 3.2 4.5 5 10.7 13.63 725 54.7 7.30 2.00 82.9 12.2
200 x 100 200 100 3.2 4.5 5 12.0 15.33 1,070 75.1 8.34 2.21 107 15.0
200 x 100 200 100 3.2 6.0 5 14.3 18.23 1,330 100 8.53 2.34 133 20.0
200 x 150 200 150 3.2 4.5 5 15.6 19.83 1,500 253 8.68 3.57 150 33.8
250 x 125 250 125 3.2 4.5 5 15.1 19.18 2,100 147 10.5 2.76 168 23.5
250 x 125 250 125 4.5 6.0 5 20.3 25.92 2,770 196 10.3 2.75 221 31.3
300 x 150 300 150 4.5 6.0 5 24.5 31.17 4,830 338 12.4 3.29 322 45.0
350 x 175 350 175 4.5 6.0 5 28.6 36.42 7,720 536 14.6 3.84 441 61.3
Note : (These Sizes are not included in regular rolling schedules.)
NominalSize(mm)
Standard SectionalDimension(mm)
H B t1 t2 r W A Ix Iy ix iy Sx Sy
Unit Weight(kg/m)
SectionalArea(cm2)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
-
Products Guide HYUNDAI STEEL
27
(I-B
eams)
I
26
(StructuralTees)
C.T.
7. I-Beams I
Dimensions and Sectional Properties KS D 3503, 3515/3502
*100 x 75 5 8 7 3.5 16.43 12.9 281 47.3 4.14 1.70 56.2 12.6
*125 x 75 5.5 9.5 9 4.5 20.45 16.1 538 57.5 5.13 1.68 86 15.3
*150 x 75 5.5 9.5 9 4.5 21.83 17.1 819 57.5 6.12 1.62 109 15.3
200 x 100 7 10 10 5 33.06 26.0 2170 138 8.11 2.05 217 27.7
250 x 125 7.5 12.5 12 6 48.79 38.3 5180 337 10.3 2.63 414 53.9
300 x 150 10 18.5 19 9.5 83.47 65.5 12700 886 12.3 3.26 849 118
*300 x 150 11.5 22 23 11.5 97.88 76.8 14700 1080 12.2 3.32 978 149
Note : * (These sizes indicated by an asterisk(*) are not included in regular rolling schedules.)
Standard SectionalDimension(mm)
H x B t1 t2 r1 r2 A W Ix Iy ix iy Sx Sy
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
8. I-Beams for Mine Support I
Dimensions and Sectional Properties KS E 4002
100 x 80 9 12.5 13 4 26.4 20.7 403 80.5 3.91 1.75 80.7 21.1
130 x 100 12 17 16 7 44.6 35.0 1.130 211 5.05 2.18 175 42.3
Standard SectionalDimension(mm)
H x B t1 t2 r1 r2 A W Ix Iy ix iy Sx Sy
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
194 x 402 15 15 22 89.23 70.0 2,480 8,130 5.27 9.54 158 404 3.70
197 x 398 11 18 22 93.41 73.3 2,050 9,460 4.68 10.1 123 475 3.01
197 x 405 18 18 22 107.2 84.1 3,050 9,980 5.34 9.65 193 493 3.89
200 x 400 13 21 22 109.3 85.8 2,480 11,200 4.76 10.1 147 560 3.21
200 x 400 200 x 408 21 21 22 125.3 98.4 3,650 11,900 5.40 9.75 229 584 4.07
203 x 403 16 24 22 127.4 100 3,090 13,100 4.92 10.0 184 650 3.51
207 x 405 18 28 22 147.7 116 3,360 15,500 4.95 10.2 213 766 3.68
214 x 407 20 35 22 180.3 142 4,380 19,700 4.93 10.4 250 967 3.90
229 x 417 30 50 22 264.3 207 7,470 30,200 5.32 10.7 414 1,450 4.85
249 x 432 45 70 22 385.0 302 13,200 47,100 5.87 11.1 706 2,180 6.13
225 x 200 223 x 199 8 12 18 42.15 33.1 1,880 790 6.67 4.33 109 79.4 5.10
225 x 200 9 14 18 43.38 38.0 2,160 936 6.68 4.40 124 93.6 5.15
225 x 300 217 x 299 10 15 24 67.52 53.0 2,350 3,350 5.89 7.04 133 224 4.04
220 x 300 11 18 24 78.69 61.8 2,680 4,060 5.84 7.68 149 270 4.05
248 x 199 9 14 20 50.64 39.7 2,840 922 7.49 4.27 150 92.6 5.90
250 x 200 250 x 200 10 16 20 57.12 44.8 3,210 1,070 7.50 4.33 169 107 5.96
253 x 201 11 19 20 65.65 51.5 3,670 1,290 7.48 4.33 190 128 5.95
250 x 300 241 x 300 11 15 26 72.76 57.1 3,420 3,380 6.85 6.82 178 225 4.92
244 x 300 11 18 26 81.76 64.2 3,620 4,060 6.66 7.07 1 84 270 4.66
300 x 200 298 x 199 10 15 22 60.23 47.3 5,190 989 9.29 4.05 236 99.4 7.79
300 x 200 11 17 22 67.21 52.8 5,810 1,140 9.30 4.12 262 114 7.84
300 x 200303 x 201 12 20 22 76.24 59.8 6,570 1,360 9.28 4.22 292 135 7.79
306 x 202 13 23 22 85.33 67.0 7,340 1,590 9.27 4.31 322 157 7.79
291 x 300 12 17 28 87.24 68 6,360 3,830 8.54 6.63 280 256 6.39
300 x 300 294 x 300 12 20 28 96.24 75.6 6,170 4,510 8.35 6.85 288 301 6.08
297 x 302 14 23 28 111.2 87.3 7,910 5,290 8.44 6.90 339 350 6.33
346 x 300 13 20 28 105.7 83.0 11,300 4,510 10.3 6.53 425 301 7.99
350 x 300 350 x 300 13 24 28 117.7 92.4 12,000 5,410 10.1 6.78 438 361 7.55
354 x 302 15 28 28 136.8 107 14,200 6,440 10.2 6.86 513 426 7.78
396 x 300 14 22 28 121.7 95.6 17,700 4,960 12.1 6.38 593 331 9.66
400 x 300 400 x 300 14 26 28 133.7 105 18,800 6,860 11.9 6.62 610 391 9.18
404 x 302 16 30 28 153.8 121 21,900 6,900 11.9 6.70 705 457 9.41
Note : (These sizes are not included in regular rolling schedules.)
NominalSize(mm)
Standard SectionalDimension(mm)
H x B t1 t2 r A W Ix Iy ix iy Sx Sy Cx
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
Center ofGravity(cm)
-
Products Guide HYUNDAI STEEL
29
(EqualA
ngles)
28
(EqualA
ngles)
120 x 120 120 x 120 8 12 5 18.76 14.7 3.24 258 410 106 3.71 4.67 2.38 29.5
130 x 130 9 12 6 22.74 17.9 3.53 366 583 150 4.01 5.06 2.57 38.7
130 x 130 130 x 130 10 12 6 25.16 19.7 3.57 403 641 165 4.0 5.05 2.56 42.8
130 x 130 12 12 8.5 29.76 23.4 3.64 467 743 192 3.96 5.0 2.54 49.9
130 x 130 15 12 8.5 36.75 28.8 3.76 568 902 234 3.93 4.95 2.53 61.5
150 x 150 10 14 7 29.21 22.9 4.06 627 997 258 4.63 5.84 2.97 57.3
150 x 150150 x 150 12 14 7 34.77 27.3 4.14 740 1.180 304 4.61 5.82 2.96 68
150 x 150 15 14 10 42.74 33.6 4.24 888 1.140 365 4.56 5.75 2.92 82.6
150 x 150 19 14 10 53.38 41.9 4.40 1.090 1.730 451 4.52 5.69 2.91 103
175 x 175175 x 175 12 15 11 40.52 31.8 4.73 1.170 1.860 480 5.38 6.78 3.44 91.8
175 x 175 15 15 11 50.21 39.4 4.85 1.440 2.290 589 5.35 6.75 3.42 114
200 x 200 15 17 12 57.75 45.3 5.46 2.180 3.470 891 6.14 7.75 3.93 150
200 x 200 200 x 200 20 17 12 76.0 59.7 5.67 2.820 4.490 1.160 6.09 7.68 3.90 197
200 x 200 25 17 12 93.75 73.6 5.86 3.420 5.420 1.410 6.04 7.61 3.88 242
250 x 250 250 x 250 25 24 12 119.4 93.7 7.10 6.950 11.100 2.860 7.63 9.62 4.90 388
250 x 250 35 24 18 162.6 128 7.45 9.110 14.400 3.790 7.49 9.42 4.83 519
Note : * (These sizes indicated by an asterisk(*) are not included in regular rolling schedules.)
NominalSize(mm)
Standard SectionalDimension(mm)
A x B t r1 r2 A W Cx=Cy Ix=Iy max. min ix=iy max. min Sx=SyIu Iv iu iv
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
Center ofGravity(cm)
9. Equal Angles
Dimensions and Sectional Properties KS D 3503, 3515/3502
25 x 25 *25 x 25 3 4 2 1.427 1.12 0.719 0.797 1.26 0.332 0.747 0.940 0.483 0.448
30 x 30 *30 x 30 3 4 2 1.727 1.36 0.844 1 .42 2.26 0 .590 0.908 1.14 0.585 0.661
40 x 40 *40 x 40 5 4.5 3 3.755 2.95 1.17 5.42 8.59 2.25 1.20 1.51 0.774 1.91
45 x 45 45 x 45 4 6.5 3 3.492 2.74 1.24 6.50 10.3 2.69 1.36 1.72 0.88 2.00
45 x 45 5 6.5 3 4.302 3.38 1.28 7.91 12.5 3.29 1.36 1.71 0.874 2.46
50 x 50 4 6.5 3 3.892 3.06 1.37 9.06 14.4 3.76 1.53 1.92 0.983 2.49
50 x 50 50 x 50 5 6.5 3 4.082 3.77 1.41 11.1 17.5 4.58 1.52 1.91 0.976 3.08
50 x 50 6 6.5 4.5 5.644 4.43 1.44 12.6 20.0 5.23 1.50 1.88 0.963 3.55
60 x 60 4 6.5 3 4.692 3.68 1.61 16.0 25.4 6.62 1.85 2.33 1.19 3.66
60 x 60 60 x 60 5 6.5 3 5.802 4.55 1.66 19.6 31.2 8.09 1.84 2.32 1.18 4.52
60 x 60 6 6.5 4.5 6.844 5.37 1.69 22.6 35.9 9.3 1.82 2.29 1.17 5.24
65 x 65 5 8.5 3 6.367 5.00 1.77 25.3 40.1 10.5 1.99 2.51 1.28 5.36
65 x 65 65 x 65 6 8.5 4 7.527 5.91 1.81 29.4 46.6 12.2 1.98 2.49 1.27 6.26
65 x 65 8 8.5 6 9.761 7.66 1.88 36.8 58.3 15.3 1.94 2.44 1.25 7.96
70 x 70 70 x 70 6 8.5 4 8.127 6.38 1.93 37.1 58.9 15.3 2.14 2.69 1.37 7.33
75 x 75 6 8.5 4 8.727 6.85 2.06 46.1 73.2 19.0 2.30 2.90 1.48 8.47
75 x 75 75 x 75 9 8.5 6 12.69 9.96 2.17 64.4 102 26.7 2.25 2.84 1.45 12.1
75 x 75 12 8.5 6 16.56 13.0 2.29 81.9 129 34.5 2.22 2.79 1.44 15.7
80 x 8080 x 80 6 8.5 4 9.327 7.32 2.18 56.4 89.6 23.2 2.46 3.10 1.58 9.7
80 x 80 7 8.5 4 10.797 8.48 2.23 64.2 102.4 26.8 2.44 3.08 1.58 11.12
90 x 90 6 10 5 10.55 8.28 2.42 80.7 128 33.4 2.77 3.48 1.78 12.3
90 x 90 7 10 5 12.22 9.59 2.46 93 148 38.3 2.76 3.48 1.77 14.2
90 x 90 90 x 90 8 10 7 13.764 10.8 2.50 104 165 42.8 2.74 3.46 1.76 16.0
90 x 90 9 10 7 15.394 12.1 2.54 114 182 47.3 2.72 3.44 1.75 17.65
90 x 90 10 10 7 17.0 13.3 2.57 125 199 51.7 2.71 3.42 1.74 19.5
90 x 90 13 10 7 21.71 17.0 2.69 156 248 65.3 2.68 3.38 1.73 24.8
100 x 100 7 10 5 13.62 10.7 2.71 129 205 53.2 3.08 3.88 1.98 17.7
100 x 100 100 x 100 8 10 8 15.36 12.1 2.75 144 229 59.4 3.06 3.86 1.97 19.86
100 x 100 10 10 7 19.0 14.9 2.82 175 278 72.0 3.04 3.83 1.95 24.4
100 x 100 13 10 7 24.31 19.1 2.94 220 348 91.1 3.00 3.78 1.94 31.1
NominalSize(mm)
Standard SectionalDimension(mm)
A x B t r1 r2 A W Cx=Cy Ix=Iy max. min ix=iy max. min Sx=SyIu Iv iu iv
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
Center ofGravity(cm)
-
Products Guide HYUNDAI STEEL
31
(Channels)
30
12. Channels Dimensions and Sectional Properties KS D 3503, 3515/3502
*75 x 40 5 7 8 4 8.818 6.92 1.28 75.3 12.2 2.92 1.17 20.1 4.47
*100 x 50 5 7.5 8 4 11.92 9.36 1.54 188 26.0 3.97 1.48 37.6 7.52
125 x 65 6 8 8 4 17.11 13.4 1.90 424 61.8 4.98 1.90 67.8 13.4
150 x 75 6.5 10 10 5 23.71 18.6 2.28 861 117 6.03 2.22 115 22.4
200 x 80 7.5 11 12 6 31.33 24.6 2.21 1.950 168 7.88 2.32 195 29.1
200 x 90 8 13.5 14 7 38.65 30.3 2.74 2.490 277 8.02 2.68 249 44.2
250 x 90 9 13 14 7 44.07 34.6 2.40 4.180 294 9.74 2.58 334 44.5
300 x 90 9 13 14 7 48.57 38.1 2.22 6.440 309 11.5 2.52 429 45.7
380 x 100 10.5 16 18 9 69.69 54.5 2.41 14.500 535 14.5 2.78 763 70.5
*380 x 100 13 20 24 12 85.71 67.3 2.54 17.600 655 14.3 2.76 926 87.8
Note : * (These sizes indicated by an asterisk(*) are not included in regular rolling schedules.)
Standard SectionalDimension(mm)
H x B t1 t2 r1 r2 A W Cy Ix Iy ix iy Sx Sy
SectionalArea(cm2)
Unit Weight(kg/m)
Center ofGravity(cm)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
10. Unequal Angles Dimensions and Sectional Properties KS D 3503, 3515/3502
100 x 75100 x 75 7 10 5 11.87 9.32 3.06 1.83 118 56.9 144 30.8 3.15 2.19 3.49 1.61 0.548 17.0 10.0
100 x 75 10 10 7 16.50 13.0 3.17 1.94 159 76.1 194 41.3 3.11 2.15 3.43 1.58 0.543 23.3 13.7
125 x 75 7 10 5 13.62 10.7 4.10 1.64 219 60.4 243 36.4 4.01 2.11 4.23 1.64 0.362 26.1 10.3
125 x 75 125 x 75 10 10 7 19.00 14.9 4.22 1.75 299 80.9 330 49.0 3.96 2.06 4.17 1.61 0.357 36.1 14.1
125 x 75 13 10 7 24.31 19.1 4.35 1.87 376 101 415 61.9 3.93 2.04 4.13 1.60 0.352 46.1 17.9
150 x 90150 x 90 9 12 6 20.94 16.4 4.95 1.99 485 133 537 80.4 4.81 2.52 5.06 1.96 0.361 48.2 19.0
150 x 90 2 12 8.5 27.36 21.5 5.07 2.01 619 167 685 102 4.76 2.47 5.00 1.93 0.357 62.3 24.3
NominalSize(mm)
Standard SectionalDimension(mm)
A x B t r1 r2 A W Cx Cy Ix Iy max. min ix iy max. min Sx SyIu Iv iu iv
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
tan
Modulus ofSection(cm3)
Center of Gravity(cm)
11. Inverted Angles Dimensions and Sectional Properties KS D 3503, 3515/3502
200x90 200 x 90 10 14 14 7 31.52 24.7 6.61 2.08 1,297 202 1,290 125 6.41 2.53 6.41 2.53 0.263 96.9 29.2
250x90250 x 90 10 15 17 8.5 37.47 29.4 8.61 1.92 2,440 223 2,520 147 8.08 2.44 8.20 1.98 0.182 149 31.5
250 x 90 12 16 17 8.5 42.95 33.7 8.99 1.89 2,790 238 2,870 160 8.07 2.35 8.18 1.93 0.173 174 33.5
300x90300 x 90 11 16 19 9.5 46.22 36.3 11.0 1.76 4,370 245 4,440 168 9.72 2.30 9.80 1.90 0.136 229 33.8
300 x 90 13 17 19 9.5 52.67 41.3 11.3 1.75 4,940 259 5,020 181 9.68 2.22 9.76 1.85 0.128 264 35.8
350x100 350 x 100 12 17 22 11 57.74 45.3 13.0 1.87 7,440 362 7,550 251 11.3 2.50 11.4 2.08 0.124 338 44.5
400x100400 x 100 11.5 16 24 12 61.08 48.0 15.28 1.71 10,284 349 11,600 277 13 2.39 13 2.39 0.0996 416 42.1
400 x 100 13 18 24 12 68.59 53.8 15.4 1.77 11,500 388 11,600 277 12.8 2.38 13 2.01 0.0996 467 47.1
450x125 450 x 125 11.5 18 24 12 73.11 57.4 16.2 2.29 15,700 768 16,000 525 14.7 3.24 14.8 2.68 0.126 547 75.2
NominalSize(mm)
Standard SectionalDimension(mm)
A x B t1 t2 r1 r2 A W Cx Cy Ix max. min Iv ix max min iv Sx SyIy Iu iy iu
SectionalArea(cm2)
Unit Weight(kg/m)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
tan
Modulus ofSection(cm3)
Center of Gravity(cm)
Dimensions and Sectional Properties
100 x 50 4.5 7.5 8 - 11.6 9.1 1.71 189 28.5 4.0 1.6 37.7 8.6
125 x 65 5.5 8 8 - 16.7 13.1 2.14 424 70.3 5.0 2.1 67.8 16.1
150 x 75 6 10 10 - 23.2 18.2 2.54 864 131.3 6.1 2.4 115.1 26.5
200 x 80 6.5 11.5 12 - 30.5 24.0 2.55 1,984 192.5 8.1 2.5 198.4 35.3
200 x 90 7.5 13.5 14 - 38.1 29.9 3.02 2,501 305.7 8.1 2.8 250.1 51.1
250 x 90 8.5 13 14 - 43.3 34.0 2.64 4,187 329.2 9.8 2.8 335.0 51.8
300 x 90 8.5 13 14 - 47.5 37.3 2.44 6,432 348.5 11.6 2.7 428.8 53.2
380 x 100 10 16 18 - 68.2 53.5 2.63 14,527 592.6 14.6 2.9 764.6 80.4
Standard SectionalDimension(mm)
H x B t1 t2 r1 r2 A W Cy Ix Iy ix iy Sx Sy
SectionalArea(cm2)
Unit Weight(kg/m)
Center ofGravity(cm)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
(InvertedA
ngles)
13. Parallel Flange Channels
-
Products Guide HYUNDAI STEEL
33
(R
ailway
Rails)
32
(SheetPiles) 15. Mast Beams
Dimensions and Sectional Properties
1T C 31.71 24.89 147.0 44.0 44.0 11.0 22.0 25.5 -
J 31.75 24.92 138.0 71.0 40.5 10.0 19.0 19.5 16.0
J 43.4 34.00 155.0 86.0 50.0 12.0 20.0 23.0 19.0
2T C 36.82 28.90 163.5 60.8 47.6 10.0 24.4 24.4 -
I 33.95 26.70 148.7 67.0 67.0 10.0 17.0 17.0 -
3.5T C 50.04 39.28 184.8 66.7 54.0 12.7 28.6 28.6 -
I 53.42 41.93 175.2 76.1 76.1 12.7 23.8 23.8 -
5T C 69.34 54.43 228.6 76.2 76.2 12.7 31.75 31.75 -
I 86.84 68.17 228.6 95.25 95.25 15.88 31.75 31.75 -
Profile No.
No. TYPE W H h t1 t2 t3 t4
SectionalArea(cm2)
Unit Weight(kg/m)
Dimensions (mm)
16. Railway Rails
Dimensions and Sectional Properties KS R 9106
A mm 107.96 122.24 140.0 144.46 153.0 174.0 174.0 148 - - - - - - 128.59 142.88 159 172 135.0
in - - - - - - - - 5-5/8 6 6-5/8 6-13/16 7-1/8 -5/16 5-1/16 5-5/8 - - -
B mm 107.95 122.24 122.0 127.0 127.0 145.0 145.0 140 - - - - - - 114.3 127.0 140 150 140.0
in - - - - - - - - 5-1/8 5-3/8 5-1/2 5-1/2 6 6 4-1/2 5 - - -
C mm 60.33 62.71 64.0 67.87 65.0 65.0 65.0 65.3 - - - - - - 61.91 66.67 70 74.3 100
in - - - - - - - - 2-9/16 2-11/16 2-23/32 2-21/32 3 2-15/16 2-7/16 2-5/8 - - -
D mm 12.3 13.49 14.0 14.29 150 16.5 16.5 16.5 - - - - - - 12.7 13.89 16 16.5 32.0
in - - - - - - - - 9/16 9/16 5/8 5/8 25/32 11/16 1/2 35/64 - - -
E mm 30.95 36.12 41.0 46.04 49.0 49.0 49.0 35 - - - - - - 42.07 46.04 49.4 51 43.0
in - - - - - - - - 1-15/32 1-21/32 1-11/16 1-7/8 1-3/4 1-15/16 1-21/32 1-13/16 - - -
F mm 19.45 21.43 25.5 27.78 30.0 30.1 30.1 52 - - - - - - 23.81 26.19 30.2 31.5 26.5
in - - - - - - - - 1 1-1/16 1-1/18 1-1/8 1-3/16 1-3/16 15/16 1-1/32 - - -
G mm 48.22 53.78 70.0 63.1 76.0 61.8 61.8 28 - - - - - - 64.29 71.44 74.97 - 100
in - - - - - - - - 2-29/32 1-31/32 3-1/4 3-1/8 3-7/8 3-7/8 2-17/32 2-13/16 - - -
R mm 304.8 304.8 500.0 254.0 500.0 500.0 500.0 - - - - - - - 508.0 508.0 508.0 120 93.38
in - - - - - - - - 14 14 14 14 16 20 20 20 - - -
S cm2 38.26 47.3 52.0 64.3 64.2 77.5 77.3 88.5 - - - - - - 47.74 57.35 69.34 76.86 66.9
in2 - - - - - - - - 8.82 9.95 11.25 11.65 12.95 13.35 7.40 8.89 - - -
W kg/m 30.1 37.2 40.9 50.4 50.4 60.8 60.7 69.5 44.64 50.35 56.90 58.93 65.53 67.56 37.48 45.05 54.43 60.34 73.3
1b/yd - - - - - - - - 90.0 101.5 114.7 118.8 132.2 136.2 75.55 90.76 - - -
Yd mm 52.07 58.4 68.9 66.9 71.6 77.8 77.6 62.22 - - - - - - 63.82 69.97 76.2 80.95 62.22
in - - - - - - - - 2.54 2.75 2.98 3.12 3.20 3.347 2.51 2.76 - - -
J cm4 606 952 1,360 1,740 1,960 3,090 3,064 2,120 - - - - - - 1.049 1,564 2,346 3,055 2,000
in4 - - - - - - - - 38.7 49.0 65.5 71.4 88.2 94.9 - - - - -
Z cm3 116 164 197 261 274 397 395 340.8 - - - - - - 16.18 214.8 313.0 377.0 299
in3 - - - - - - - - 15.2 17.8 22.0 22.9 27.6 28.3 -
Note : * (These sizes indicated by an asterisk(*) are not included in regular rolling schedules.)
StandardSectionalDimension
SectionalAreaUnitWeight Distance from Rail Base toNeutral Axis
2Momentof inertiaModulusof Section
Items 30A 37A 40N 50PS 50N 60 60K 70s
* * * * * * *75A *90A *54A 60 7390lbs 100lbs 115lbs 119lbs 132lbs 136lbs
Specifications KS,JIS AREA BS UIC HS
* *
14. Sheet Piles Dimensions and Sectional Properties KS F 4604
SP- 400 100 10.5 61.2 153.0 48.0 120 1,240 8,740 152 874
SP- 400 125 13.0 76.4 191.0 60.0 150 2,220 16,800 223 1,340
SP-A(E) 400 150 13.1 74.4 186.0 58.4 146 2,790 22,800 250 1,520
SP-A(D) 400 150 13.0 76.4 191.0 60.0 150 3,060 22,600 278 1,510
SP- 400 170 15.5 96.9 242.5 76.1 190 4,670 38,600 362 2,270
SP-M 500 175 16.5 109.6 219.2 86.0 172 5,345 40,290 383 2,310
SP-A 500 200 19.5 133.8 267.6 105.0 210 7,960 63,000 520 3,150
SP-w 600 130 10.3 78.7 131.2 61.8 103 2,110 13,000 203 1,000
SP-w 600 180 13.4 103.9 173.2 81.6 136 5,220 32,400 376 1,800
SectionType
Dimension
B H t Per Pile Per Wall Per Pile Per Wall Per Pile Per Wall Per Pile Per WallWidth Width Width Width mm mm mm cm2 cm2/m kg/m kg/m2 cm4 cm4/m cm3 cm3/m
Sectional Area
Unit Weight
2 Moment of Inertia
Modulus of Section
-
Products Guide HYUNDAI STEEL
35
(R
einforcingB
ars)
34
(LightR
ails)
17. Light Rails
Dimensions and Sectional Properties KS R 9101
18. Elevator Guide Rails
Dimensions and Sectional Properties
15kg 79.37 79.37 42.86 8.33 22.22 13.5 35.33 304.8 19.3 15.2 38.92 156.1 2.83 38.59
*20kg 88.9 88.9 47.63 9.92 25.8 15.88 39.69 304.8 25.4 19.9 272.22 58.83
22kg 93.66 93.66 50.8 10.72 26.99 16.67 41.67 304.8 28.4 22.3 45.21 334.82 3.45 69.60
Note : * (These sizes indicated by an asterisk(*) are not included in regular rolling schedules.)
NominalSize
Standard SectionalDimension(mm)
A B C D E F G R S W Yb Ix ix Sx
SectionalArea(cm2)
Unit Weight(kg/m)
Distance fromRail BasetoNeutral Axis(mm)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
8kg 5.000 42.8 1.65 3.95 9.84 29.9 26.1 1.74 1.63 7.56 6.71
13kg 5.000 65.6 2.03 4.17 15.4 59.5 40.4 1.96 1.81 14.3 11.3
18kg 5.000 87.7 2.87 6.02 20.9 179.1 109.0 2.93 2.29 29.7 19.1
24kg 5.000 119.0 2.48 6.41 28.4 199.0 227.0 2.65 2.83 31.1 35.7
NominalSize
C(cm) e(cm) lx ly ix iy Sx Sy
Length(mm)
(kg/pcs)
Distance from Rail Baseto Neutral Axis
(cm2)
2 Moment ofInertia(cm4)
2 Radius ofGyration(cm)
Modulus ofSection(cm3)
D10 0.560 9.53 0.7133 3.0 6.7 0.4 0.8 7.5 3 0.376 0.560 10 0.617 10 0.616
D13 0.995 12.7 1.267 4.0 8.9 0.5 1.0 10.04 0.668 0.994 12 0.888 12 0.888
14 1.210 - -
D16 1.56 15.9 1.986 5.0 11.1 0.7 1.4 12.5 5 1.043 1.552 16 1.580 16 1.579
D19 2.25 19.1 2.865 6.0 13.4 1.0 2.0 15.06 1.502 2.235 18 2.00 - -
20 2.47 20 2.466
D22 3.04 22.2 3.871 7.0 15.5 1.1 2.2 17.5 7 2.044 3.042 22 2.98 - -
D25 3.98 25.4 5.067 8.0 17.8 1.3 2.6 20.0 8 2.670 3.973 25 3.85 25 3.854
D29 5.04 28.6 6.424 9.0 20.0 1.4 2.8 22.5 9 3.400 5.060 28 4.83 - -
D32 6.23 31.8 7.942 10.0 22.3 1.6 3.2 25.0 10 4.303 6.403 32 6.31 32 6.313
D35 7.51 34.9 9.566 11.0 24.4 1.7 3.4 27.5 11 5.313 7.906 - - - -
D38 8.95 38.1 11.40 12.0 26.7 1.9 3.8 30.0 - - - 36 7.99 - -
D41 10.5 41.3 13.40 13.0 28.9 2.1 4.2 32.5 14 7.65 11.38 40 9.87 40 9.864
D51 15.9 50.8 20.27 16.0 35.6 2.5 5.0 40.0- - - 45 12.50 - -
50 15.40 50 15.413
D57 - - - - - - - - 18 13.60 20.24 - - - -
19. Reinforcing Bars
1) Dimensions and Weight
Desig-nation
KS D 3504, JIS G 3112 ASTM A 615 SAUDI ARABIANStandard BS 4449 UnitWei-ght
BarDesign-ationNo.
NominalDiameter
UnitWeight
UnitWeight
NominalDiameter
UnitWeight
Dia-meter
Sec-tionalArea
Peri-meter
Max.AverageSpacing
Min.AverageHeight
Max.Height
Max.Gap
Nominal Dimensions
Deformation Requirements
kg/m mm cm2 cm cm mm mm mm lb/ft kg/m mm kg/m mm kg/m
-
Products Guide HYUNDAI STEEL
37
(R
einforcingB
ars)
36
(R
einforcingB
ars)
2) () (KS D 3504)
(1) 1
: KS 3504 1 : 1(2 ) : 1(kg )
1 3.36 3.64 3.92 4.20 4.48 5.04 5.60 6.16 6.72
D10 0.560 300 270 270 240 210 210 180 150 150
1,008 983 10,528 1,008 941 1,058 1,008 924 1,008
1,800 1,755 1,890 1,800 1,680 1,890 1,800 1,650 1,800
1 5.97 6.47 6.97 7.46 7.96 8.96 9.95 10.95 11.94
D13 0.995 160 160 140 140 120 120 100 100 80
955 1,035 976 1,044 955 1,075 995 1,095 955
690 1,040 980 1,050 960 1,080 1,000 1,100 960
1 9.36 10.14 10.92 11.70 12.48 14.04 15.60 17.16 18.72
D16 1.56 105 105 90 90 75 75 60 60 60
983 1,065 983 1,053 936 1,053 936 1,030 1,123
630 682.5 630 675 600 675 600 660 720
1 13.50 14.63 15.75 16.88 18.00 20.25 22.50 24.75 27.00
D19 2.25 74 68 63 59 56 49 44 40 37
999 995 992 669 1,008 992 990 990 999
444 442 440 442.5 448 441 440 440 444
1 18.24 19.76 21.26 22.80 24.32 27.36 30.40 33.44 36.48
D22 3.04 55 51 47 44 41 37 33 30 27
1,003 1,008 1,000 1,003 997 1,012 1,003 1,003 985
330 331.5 329 330 328 333 330 330 324
1 23.88 25.87 27.86 29.85 31.84 35.82 39.80 43.78 47.76
D25 3.98 42 39 36 33 32 28 25 23 21
1,003 1,009 1,003 985 1,019 1,003 995 1,007 1,003
252 253.5 252 247.5 256 252 250 253 252
1 30.24 32.76 35.28 37.80 40.32 45.36 50.40 55.44 60.48
D29 5.04 33 31 28 26 25 22 20 18 17
998 1,016 988 983 1,008 998 1,008 998 1,028
198 201.5 196 195 200 198 200 198 204
1 37.38 40.50 43.61 46.73 49.84 56.07 62.30 68.53 74.76
D32 6.23 27 25 23 21 20 18 16 15 13
1,009 1,013 1,003 981 997 1,009 997 1,028 972
162 162.5 161 157.5 160 162 160 165 156
Designation
Unit Weight(kg/m)
Classification
Length
(m) 6 6.5 7 7.5 8 9 10 11 12
(2) 2
1 3.36 3.64 3.92 4.20 4.48 5.04 5.60 6.16 6.72
D10 0.560 600 540 540 480 420 420 360 300 300
2,016 1,966 2,116 2,016 1,882 2,116 2,016 1,848 2,016
3,600 3,510 3,780 3,600 3,360 3,780 3,600 3,300 3,600
1 5.97 6.47 6.97 7.46 7.96 8.96 9.95 10.95 11.94
D13 0.995 320 320 280 280 240 240 200 200 160
1,910 2,070 1,952 2,088 1,910 2,150 1,990 2,190 1,910
1,920 2,080 1,960 2,100 1,920 2,160 2,000 2,200 1,920
1 9.36 10.14 10.92 11.70 12.48 14.04 15.60 17.16 18.72
D16 1.56 210 210 180 180 150 150 120 120 120
1,966 2,130 1,966 2,106 1,872 2,106 1,872 2,060 2,246
1,260 1,365 1,260 1,350 1,200 1,350 1,200 1,320 1,440
6 6.5 7 7.5 8 9 10 11 12
1 45.06 48.82 52.57 56.33 60.08 67.59 75.10 82.61 90.12
D35 7.51 22 20 19 18 17 15 13 12 11
991 976 999 1,014 1,021 1,014 976 991 991
132 130 133 135 136 135 130 132 132
1 53.70 58.18 62.65 67.13 71.60 80.55 89.50 98.45 107.40
D38 8.95 19 17 16 15 14 12 11 10 9
1,020 989 1,002 1,007 1,002 967 985 985 967
114 110.5 112 112.5 112 108 110 110 108
1 63.00 68.25 73.50 78.75 84.00 94.50 105.00 115.50 126.00
D41 10.5 16 15 14 13 2 11 10 9 8
1,008 1,024 1,029 1,024 1,008 1,040 1,050 1,040 1,008
96 97.5 98 97.5 96 99 100 99 96
1 95.40 103.35 111.3 119.25 127.20 143.10 159.00 174.90 190.00
D51 15.9 11 10 9 8 8 7 6 6 5
1,049 1,034 1,002 954 1,018 1,002 954 1,049 954
66 65 63 60 64 63 60 66 60
6 6.5 7 7.5 8 9 10 11 12 Designation
Unit Weight(kg/m)
Classification
Length
(m)
Designation
Unit Weight(kg/m)
Classification
Length
(m)
-
Products Guide HYUNDAI STEEL
39
(R
oundB
ars)
38
(R
einforcingB
ars)
1 13.50 14.63 15.75 16.88 18.00 20.25 22.50 24.75 27.00
D19 2.25 148 136 126 118 112 98 88 80 74
1,998 1,990 1,984 1,992 2,016 1,984 1,980 1,980 1,998
888 884 882 885 895 882 880 880 888
1 18.24 19.76 21.28 22.80 24.32 27.36 30.40 33.44 36.48
D22 3.04 110 102 94 88 82 74 66 60 54
2,006 2,016 2,000 2,006 1,994 2,024 2,006 2,006 4,970
660 663 658 660 656 666 660 660 648
1 23.88 25.87 27.86 29.85 31.84 35.82 39.80 43.78 47.76
D25 3.98 84 78 72 66 64 56 50 46 42
2,006 2,018 2,006 1,970 2,038 2,006 1,990 2,014 2,006
504 507 504 495 512 504 500 506 504
1 30.24 32.76 35.28 37.80 40.32 45.36 50.40 55.44 60.48
D29 5.04 66 62 56 52 50 44 40 36 34
1,996 2,032 1,976 1,966 2,016 1,996 2,016 1,996 2,056
396 403 392 390 400 396 400 396 408
1 37.38 40.50 43.61 46.73 49.84 56.07 62.30 68.53 74.76
D32 6.23 54 50 46 42 40 36 32 30 26
2,018 2,026 2,006 1,962 1,994 2,018 1,994 2,056 1,944
324 325 322 315 320 324 320 330 312
1 45.06 48.82 52.57 56.33 60.08 67.59 75.10 82.61 90.12
D35 7.51 44 40 38 36 34 30 26 24 22
1,982 1,952 1,998 2,028 2,042 2,028 1,952 1,982 1,982
264 260 266 270 272 270 260 264 264
1 53.70 58.18 62.65 67.13 71.60 80.55 89.50 98.45 107.40
D38 8.95 38 34 32 30 28 24 22 20 18
2,040 1,978 2,004 2,014 2,004 1,934 1,970 1,970 1,934
228 221 224 225 224 216 220 220 216
1 63.00 68.25 73.50 78.75 84.00 94.50 105.00 115.50 126.00
D41 10.5 32 30 28 26 24 22 20 18 16
2,016 2,048 2,058 2,048 2,016 2,080 2,100 2,080 2,016
192 195 196 195 192 198 200 198 192
1 95.40 103.35 11.3 119.25 127.20 143.10 159.00 174.90 190.00
D51 15.9 22 20 18 16 16 14 12 12 10
2,098 2,068 2,004 1,908 2,036 2,004 1,908 2,908 1,908
132 130 126 120 128 126 120 132 120
6 6.5 7 7.5 8 9 10 11 12
20. Round Bars
1) Dimensions and Weight KS D 3707/3708/3709/3711/3723/3724/3752/3754
*19 2.835 2.23 0.640 0.6734
*20 3.142 2.47 0.758 0.7854
22 3.801 2.98 1.150 1.0454
23 4.155 3.26 1.374 1.1945
24 4.524 3.55 1.629 1.3572
25 4.909 3.85 1.917 1.5340
26 5.309 4.17 2.243 1.7255
28 6.158 4.83 3.017 2.1551
30 7.069 5.55 3.976 2.6507
32 8.042 6.31 5.147 3.2170
34 9.079 7.31 6.560 3.8587
35 9.621 7.55 7.366 4.2092
36 10.18 7.99 8.245 4.5804
38 11.34 8.90 10.24 5.3870
40 12.57 9.87 12.556 6.2831
42 13.85 10.9 15.27 7.2736
45 15.90 12.5 20.13 8.9462
48 18.10 14.2 26.057 10.857
50 19.64 15.4 30.68 12.272
52 21.24 16.7 35.891 13.804
55 23.76 18.7 44.92 16.334
58 26.42 20.7 55.450 19.155
60 28.27 22.2 63.62 21.206
65 33.18 26.0 87.62 26.961
70 38.48 30.2 117.9 33.674
75 44.18 34.7 155.3 41.417
80 50.27 39.5 201.1 50.265
85 56.75 44.5 256.2 60.292
90 63.62 49.9 322.1 71.569
95 70.88 55.6 399.8 84.173
100 78.54 61.7 490.9 98.174
105 86.59 68.0 596.7 113.65
110 95.03 74.6 718.7 130.67
115 103.9 81.5 858.5 149.31
120 113.1 88.8 1,018 169.65
130 132.7 104 1,402 215.69
140 153.9 121 1,886 269.39
150 176.7 139 2,485 331.34
160 201.1 158 3,217 402.12
170 227.0 178 4,099 482.33
180 254.5 200 5,153 572.56
190 283.5 223 6,397 673.38
200 314.2 247 7,854 785.40
220 280.1 298 11,499 1,045.47
230 415.3 326 13,730 1,194.00
*240 452.4 355 16,286 1,357.17
*250 490.9 385 19,175 1,533.98
*300 706. 9 555 39,761 2,650.72
Dia.(mm)
Sectional Area(cm2)
Unit Weight(kg/m)
2Moment ofInertia(cm4)
SectionModulus(cm3)
Dia.(mm)
Sectional Area(cm2)
Unit Weight(kg/m)
2Moment ofInertia(cm4)
SectionModulus(cm3)
Note : * (These sizes indicated by an asterisk(*) are not included in regular rolling sche