学术报告A Low Noise Amplifier For 5.2GHz Application Using

0.18um CMOS

蔡天昊2014.04.4

Outline

• Abstract• Introduction• Circuit Design• Simulation Results• Conclusion • References

Abstract This paper presents a novel LNA for 5.2 GHz

applications.

• The fully integrated 5.2GHz LNA exhibits 15dB maximum gain, 2dB minimum noise.

• The LNA produces a 1-dB compression output power of -16 dB m . It consumes 5mA current from a supply voltage of 1.8V.

Low noise amplifier is used extensively in modern communication systems.

The LNA uses source inductor degeneration to trade off between the noise and gain.

Introduction

Fig 1. Narrowband LNA topology

TOTAL NOISE

Conclusion• A novel LNA operating in 5.25GHz using

standard 0.18um 1P6M CMOS technology was demonstrated.

References Frank Ellinger and Heinz Jackel, “Low-cost BiCMOS

Variable gain LNA at Ku-Band with Ultra-Low power consumption, “IEEE MTT, vol. 52, No2, pp702-707, Feb. 2004.

R.-C. Liu, K.-L. Deng, and H.Wang, “A 0.6–22 GHz broadband CMOS distributed amplifier,” in Proc. IEEE Radio Frequency Integrated Circuits (RFIC) Symp., June 8–10, 2003, pp. 103–106.

Che-Hong Liao and Huey-Ru Chuang, “ A 5.7GHz 0.18um CMOS Gain-Controlled Differential LNA with Current Reuse WLAN Receiver,” Receiver,”IEEE Microwave and Wireless Components Letters, vol. 13,No. 12,pp.526-528, December 2003

The end!