Windows for IoT で始める効率的なガジェット開発(基礎)

Post on 14-Jul-2015

3.297 views 6 download

Transcript of Windows for IoT で始める効率的なガジェット開発(基礎)

http://www.microsoft.com/ja-jp/communities/msp.aspx

ブログ

[参考] Windows Developer Program for IoT

https://dev.windows.com/en-us/featured/Windows-Developer-Program-for-IoT

http://www.microsoft.com/ja-jp/education/dreamspark-students.aspx

http://www.microsoft.com/ja-jp/mic/bizspark/

[参考] Dreamsparkからのクリスマスプレゼント

http://www.slideshare.net/tnkt37/dreamspark-42910601

http://ms-iot.github.io/content/SetupGalileo.htm

[参考] Intel Galileo でWindows Developer Program for IoT

http://www.syuheiuda.com/?p=3136

[参考] Intel Galileo でWindows Developer Program for IoT

http://www.syuheiuda.com/?p=3136

[参考] Intel Galileo でWindows Developer Program for IoT

http://www.syuheiuda.com/?p=3136

[参考] Windows for IoT on Intel Galileoで L チカhttp://www.syuheiuda.com/?p=3140

[参考] Windows for IoT on Intel Galileoで L チカhttp://www.syuheiuda.com/?p=3140

[参考] Windows for IoT on Intel Galileoで L チカhttp://www.syuheiuda.com/?p=3140

[参考] Windows for IoT on Intel Galileoで L チカhttp://www.syuheiuda.com/?p=3140

[参考] Windows for IoTで analogRead / analogWrite

http://www.syuheiuda.com/?p=3166

#include "stdafx.h"

#include "arduino.h"

int _tmain(int argc, _TCHAR* argv[])

{

return RunArduinoSketch();

}

int led = 3; // This is the pin the LED is attached to.

int val = 0;

void setup()

{

}

// the loop routine runs over and over again forever:

void loop()

{

val = analogRead(0);

analogWrite(led, val/16);

delay(100);

}

[参考] Windows for IoTで analogRead / analogWrite

http://www.syuheiuda.com/?p=3166

これが BreakPoint

http://www.syuheiuda.com/?cat=37

http://www.atmarkit.co.jp/ait/subtop/features/dotnet/vs2013primer_index.html