Post on 27-Apr-2020
PRODUKTKATALOGPRODUCT CATALOGUE
w w w . o p a l l - a g r i . c z
3
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
2
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
VOLL
DRE
HPF
LÜG
E O
PALL
-AG
RI
Dear customers, We have prepared the OPaLL-AGRI s.r.o. product catalogue, where you can find a range of agricultural machinery from our manufacturing portfolio. In the catalogue you will also
find a number of innovations that respond to your demands and try to meet your requirements for modern agricultu-ral machinery of high-quality design. We hope that this
catalogue will assist you in the selection of new agricultural equipment and that you will join the large group of satisfied
users of agricultural machinery of the brand OPaLL-AGRI.
The OpaLL-AGRI, s.r.o. team
2
CATALOGUE CONTENT
OPaLL-AGRI reversible ploughs .................................... 17 JUPITER II 120 ......................................................... 18 JUPITER II 140 .......................................................... 19 ORION 180 ............................................................... 20 EUROPA II 180 ......................................................... 21
Connecting devices for ploughs PLUTO II ..................................................................... 22 Clod crusher ............................................................. 22
Combined cultivators SATURN III ................................................................. 23 NEPTUN X ................................................................. 25 NEPTUN - SATURN III ............................................. 26
Disc harrows NEPTUN - PEGAS ..................................................... 27 PEGAS ......................................................................... 28
Tine cultivators MERKUR III ................................................................ 29 TRITON ...................................................................... 29
Cambridge rollers VEGA .......................................................................... 30 VIRGO.......................................................................... 30
Wearable spare parts OPaLL-AGRI................................31
Sehr geehrte Kunden, wir haben für Sie den Produktenkatalog der Gesellschaft OPaLL-AGRI s.r.o. vorbereitet. Sie finden darin das Sorti-ment der landwirtschaftlichen Maschinen aus unserem Herstellungsportfolio. Im vorliegenden Katalog finden
Sie auch eine Reihe von Neuheiten, mit denen wir auf Ihre Nachfrage nach innovativen und hochwertigen landwirt-
schaftlichen Maschinen reagieren wollen. Wir glauben, dass Ihnen unser Katalog bei der Auswahl
einer neuen landwirtschaftlichen Technik zur Hilfe stehen wird, und Sie sich somit zur Gruppe der zufriedenen Kunden
der landwirtschaftlichen Maschinen Marke OPaLL-AGRI zählen werden.
Ihr Mitarbeiter-Team von OPaLL-AGRI s.r.o.
KATALOGINHALT
Volldrehpflüge OPaLL-AGRI ................................................ 3 JUPITER II 120 .............................................................. 4 JUPITER II 140 .............................................................. 5 ORION 180 .................................................................... 6 EUROPA II 180 ............................................................. 7
Anbaugeräte zu den Pflügen PLUTO II ......................................................................... 8 Schollencracker ........................................................... 8
Kombinierte Kultivatoren SATURN III ...................................................................... 9 NEPTUN X .................................................................... 11 NEPTUN - SATURN III ............................................... 12
Scheibeneggen NEPTUN - PEGAS ....................................................... 13 PEGAS ........................................................................... 14
Flügelschargrubber MERKUR III ................................................................... 15 TRITON ........................................................................ 15
Cambridge Walzen VEGA ............................................................................. 16 VIRGO............................................................................ 16
Verschleiß- und Ersatzteile OPaLL-AGRI .................... 31
Der Ackerbau bildet den fundamentalen Grundstein der traditionellen Bodenbearbeitung. Vereinfacht könnte man sagen, dass es sich um einen Arbeitsgang handelt, bei dem die Erde umgedreht, gemischt, gebrochen und gelockert wird. Die Bedeutung des Ackerbaus greift jedoch viel weiter und doch besitzt der Pflug in der heutigen Zeit eine unvertretbare Stelle in der modernen Ag-ronomie und Agrotechnik. Hinsichtlich des breiten Spektrums der eingesetzten Schlepper und der unterschiedlichen Ackergrößen produziert die Firma OPaLL-AGRI 4 grundlegende Pflugtypen. Das sind Anbaupflüge JUPITER II 120, JUPITER II 140 und Aufsattelp-flüge ORION 180, EUROPA II 180.
Vorteile des Ackerbaus mit einem Pflug: • Umdrehen des Ackerbodens
� Austragen des Strukturbodens auf die Oberfläche � Austragen der Nährstoffe, die in den unteren Bereich des Ackerbodens gespült wurden
• Auflockern des Ackerbodens � Besseres Einsickern der Niederschläge � Durchlüftung des Ackerbodens – Veränderung der Humifikationsprozesse auf Mineralisierungsprozesse
• Bildung von Nährstoffen � Verhindert Verdichtung des Ackerbodens in Folge des Einsatzes schwerer landwirtschaftlicher Technik
• Einarbeitung der Erntereste, sowie Gut- und Industriedüngemittel � Ammoniakeinsparung � Umwandlung der organischen Stoffe in Nährstoffe und Humus
• Einfluss auf die Pflanzenbehandlung � Durch die Einarbeitung der Pflanzenreste wird der Entstehung von Krankheiten vorgebeugt � Zusammen mit den Pflanzenresten werden in den Boden auch Schädlinge und Unkraut eingearbeitet � Unterdrückung von Nagetieren
VOLLDREHPFLÜGE OPaLL-AGRI
Für die Qualität eines Pflügens ist nicht nur die Konstruktion von Bedeutung, sondern auch die richtige Auswahl des Pflugkörpers entscheidend. Im Sortiment von OPaLL-AGRI s.r.o. finden Sie 6 verschiedene Pflugkörpertypen. Ein passend ausgewählter Pflugkör-per garantiert bei den gegebenen Bodenbedingungen ein ausgezeichnetes Pflügen – gutes Zerbrechen der Erdballen und richtiges Abdecken der Erntereste. Für das hochwertige Pflügen ist die Einhaltung des Grenzverhältnisses des Pflügens, d. h. des Verhältnisses der Arbeitstiefe und der Arbeitsbreite einer Pflugschar wichtig. Die Arbeitsbreite des Pflugkörpers sollte mindestens 1,27 Mal größer sein, als die Tiefe des Pflügens.
Pflugkörpertypen:Pflugkörper, die für leichte bis mittlere, aber auch schwere bröcklige Böden bestimmt sind.
Pflugkörper, die für leichte bis mittlere, aber auch schwere bröcklige Böden mit einer Arbeitstiefe über 25 cm bestimmt sind.
UN 400
Pflugkörper, die zum Pflügen von mittleren bis schweren festen Böden geeignet sind.
PA 400
Pflugkörper, die zum Pflügen von schweren bis sehr schweren Böden bestimmt sind.
OV XL
Pflugkörper, die zum Pflügen von mittleren bis sehr schweren Böden bestimmt sind.
KV 9
Pflugkörper, die zum Pflügen von schweren bis sehr schweren Böden bestimmt sind, Anwendung finden sie auch bei Reifen mit einer Breite von 710 mm und mehr.
KV 28
UN 350
TYP UN 350 Universal
UN 400 Universal
PA 400 Streifen
OV XL Halbschraube
KV 9 Halbschraube
KV 28 Halbschraube
Max. Tiefe des Pflügens
- ohne Vorschäler (cm) 28 32 32 28 28 28
- mit Vorschälern (cm) 33 36 36 33 33 33
5
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
4
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
AU
FSAT
TEL-
VOLL
DRE
HPF
LÜG
E
Die Aufsattel-Volldrehpflüge OPaLL-AGRI JUPITER II 120 sind vor allem für Schlepper mit niedrigerer Leistung bestimmt. Dank des Baukastensystems 3+1 kann man sie hinter Schleppern ab 70 PS ankoppeln. Bedingt durch seine Konstruktion und sein geringes Eigengewicht eignen sich die Pflüge der Baureihe JUPITER II 120 besonders zum Ankoppeln hinter Schleppern mit einem leichten Vorderteil, vor allem mit Vierzylindermotoren. In der Grundausstattung ist der Rahmen mit einer Profilgröße von 120x120x10 mm mit einem mechanischen Vario System zur Verän-derung der Arbeitsbreite der Pflugkörper ausgestattet. Abhängig vom Schleppertyp und der Menge der vorhan-denen Erntereste werden die Pflüge JUPITER II 120 mit einem Pflugkörperabstand von 90 cm und 100 cm herge-stellt. Die Pflüge können sowohl mit einer Scherbolzensi-cherung oder einer Federsicherung ausgestattet werden. Statt Stützrad können wir gegen einen Aufpreis ein Kom-birad liefern, das auch als Transportrad verwendbar ist. Durch die Verwendung des Memoryzylinders werden die Hubhöhe und die Beanspruchung der Unterlenker gegen seitliche Anstöße minimiert, das alles bei der Einhaltung des höchsten Komforts - die Bedienung bei der Drehung des Pfluges erfolgt über einen hydraulischen Kreis.
TECHNISCHE PARAMETER JUPITER II 120 / 90 JUPITER II 120 / 100
Scharanzahl (St.) 3 4 3 4
Arbeitsbreite einer Schar (cm) 30 / 35 / 40 33 / 39 / 44
Gesamtarbeitsbreite vom Pflug (cm) 90 / 105 / 120 120 / 140 / 160 99 / 117 / 132 132 / 156 / 176
Lichtbreite unter dem Rahmen (cm) 80 80
Abstand der Pflugeinheiten (cm) 90 100
Empfohlene Arbeitsgeschwindigkeit (km/h) 7 7
Gewicht des Pfluges*
Scherbolzen (kg) 965 1175 970 1180
Feder (kg) 1140 1395 1145 1400
Schlepper (kW) 52 - 70 70 - 88 52 - 70 70 - 88
Schlepper (PS) 72 - 95 95 - 120 72 - 95 95 - 120
*) Das genannte Gewicht dient nur zur Orientierung und kann je nach gewählter Variante der Maschine variieren.
Aufsattel-Volldrehpflüge JUPITER II 120 Anbau-Volldrehpflüge JUPITER II 140
Die Anbau-Volldrehpflüge OPaLL-AGRI JUPITER II 140 sind zum Anbau an größere und schwerere Schlepper bestimmt. Dank dem Baukastensystem 4+1 und der robusten Konstruktion sind sie vor allem für größere landwirtschaftliche Betriebe geeignet. Diese Pflüge kann man für Schlepper mit einer Leistung von 125 PS und mehr empfehlen. In der Grundausstattung ist der Rahmen mit einer Profilgröße von 140x140x10 mm mit einem mechanischen Vario System zur Verän-derung der Arbeitsbreite der Pflugkörper ausgestattet. Abhängig vom Schleppertyp und der Menge der voraussichtlich vorhande-nen Erntereste werden die Pflüge JUPITER II 140 mit einem Pflugkörperabstand von 90 cm und 100 cm hergestellt Die Pflüge können sowohl mit einer Scherbolzensicherung oder einer Fe-dersicherung ausgestattet werden. Statt Stütz-rad können wir gegen einen Aufpreis ein Kombi-rad liefern, das als Transportrad verwendbar ist. Durch die Verwendung des Memoryzylinders werden die Hubhöhe und die Beanspruchung der Unterlanker gegen seitliche Anstöße mini-miert, das alles bei der Einhaltung des höchsten Komforts - die Bedienung bei der Drehung des Pfluges erfolgt über einen hydraulischen Kreis.
TECHNISCHE PARAMETER JUPITER II 140 / 90 JUPITER II 140 / 100
Scharanzahl (St.) 4 5 4 5
Arbeitsbreite einer Schar (cm) 30 / 35 / 40 / 45 / 50 30 / 35 / 40 / 45 / 50
Gesamtarbeitsbreite vom Pflug (cm) 120 / 140 / 160 / 180 / 200
150 / 175 / 200 / 225 / 250
120 / 140 / 160 / 180 / 200
150 / 175 / 200 / 225 / 250
Lichtbreite unter dem Rahmen (cm) 80 80
Abstand der Pflugeinheiten (cm) 90 100
Empfohlene Arbeitsgeschwindigkeit (km/h) 7 7
Gewicht des Pfluges*
Scherbolzen (kg) 1445 1670 1455 1680
Feder (kg) 1625 1895 1635 1905
Schlepper (kW) 66 - 118 85 - 130 66 - 118 85 - 130
Schlepper (PS) 90 - 160 115 - 175 90 - 160 115 – 175
*) Das genannte Gewicht dient nur zur Orientierung und kann je nach gewählter Variante der Maschine variieren.
AN
BAU
-VO
LLD
REH
PFLÜ
GE
7
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
6
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
Aufsattel-Volldrehpflüge ORION 180
Die Aufsattel-Volldrehpflüge OPaLL-AGRI ORION 180 sind für Schlepper mit einer Leistung von 145 PS und mehr bestimmt. Die Drehung des Pfluges erfolgt über ein Drehwerk mit zwei liegenden Hydraulikzylindern. Dank der Baukastenkonstruktion des Rahmens kann der Pflug mit 5-9 Pflugkörpern bestückt werden, dies kann bei jedem Einsatz variiert, d.h. gekürzt oder erweitert, werden. Dank der einzigartigen Konstruktion kann abhängig von der Anzahl der Pflugkörper auch die Stellung des Stützrads verändert werden, oder so eingestellt werden, dass mit dem letzten Schar auch die Randflächen des Ackers gepflügt werden. In der Grundausstattung ist der Rahmen mit einer Profilgröße von 180x180x10 mm mit einem mechani-schen Vario System zur Veränderung der Arbeitsbreite der Pflugkörper ausgestattet. Die Einstellung der Arbeitsbreite des ersten Pflugkörpers erfolgt direkt aus dem Fahrerhaus über einen hydraulischen Kreis. Bei der Verwendung des Pfluges im hügeligen Terrain kann die Drehung des Stützrads so eingestellt werden, dass man das Abfahren des hinteren Pflugteils quer vom Hang verhindert.
TECHNISCHE PARAMETER
Scharanzahl (St.) 5 6 7 8 9*
Arbeitsbreite einer Schar (cm) 35 / 40 / 45
Gesamtarbeitsbreite vom Pflug (cm) 175 / 200 / 225 210 / 240 / 270 245 / 280 / 315 280 / 320 / 360 315 / 360 / 405
Lichtbreite unter dem Rahmen (cm) 80
Abstand der Pflugeinheiten (cm) 100
Empfohlene Arbeitsgeschwindigkeit (km/h) 7
Gewicht des Pfluges**
Scherbolzen (kg) 2790 3115 3440 3730 4055
Feder (kg) 3065 3450 3835 4180 -
Schlepper (kW) 106 - 132 130 - 170 160 - 210 180 - 240 200 - 280
Schlepper (PS) 145 - 180 175 - 230 215 - 270 240 - 320 270 - 380
*) Nur bei der Variante mit der Scherbolzensicherung der Schare.**) Das genannte Gewicht dient nur zur Orientierung und kann je nach gewählter Variante der Maschine variieren.
Baukastensystem ORION 180
6+1+1+1 5+1+1+1+1******) diese Variante nur bei der Version 5R oder nach Kundenwunsch
System für die Drehung vom Aufsattel-Volldrehpflug ORION 180
AU
FSAT
TEL-
VOLL
DRE
HPF
LÜG
E
Aufsattel-Volldrehpflüge EUROPA II 180
Die Aufsattel-Volldrehpflüge OPaLL-AGRI EUROPA II 180 sind für Schlepper mit einer Leistung von 145 PS und mehr bestimmt. Die Drehung des Pfluges erfolgt über einen hydraulischen Drehkranz. Dank der Baukastenkonstruktion des Rahmens kann der Pflug mit 5-9 Pflugkörpern bestückt wer-den, dies kann bei jedem Einsatz variiert, d.h. gekürzt oder erweitert werden. Dank der einzigarti-gen Konstruktion kann abhängig von der Anzahl der Pflugkörper auch die Stellung des Stützrads verändert werden, oder so eingestellt werden, dass mit dem letzten Schar auch die Randflächen des Ackers gepflügt werden. In der Grundausstattung ist der Rahmen mit einer Profilgröße von 180x180x10 mm mit einem mechanischen Vario System zur Veränderung der Arbeitsbreite der Pflugkörper ausgestattet. Die Einstellung der Arbeitsbreite des ersten Pflugkörpers erfolgt direkt aus dem Fahrerhaus über einen hydraulischen Kreis. Bei der Verwendung des Pfluges im hügeligen Terrain kann die Drehung des Stützrads so eingestellt werden, dass man das Abfahren des hinteren Pflugteils quer vom Hang verhindert.
System für die Drehung vom Aufsattel-Volldrehpflug EURO-PA II 180
TECHNISCHE PARAMETER
Scharanzahl (St.) 5 6 7 8 9*
Arbeitsbreite einer Schar (cm) 35 / 40 / 45
Gesamtarbeitsbreite vom Pflug (cm) 175 / 200 / 225 210 / 240 / 270 245 / 280 / 315 280 / 320 / 360 315 / 360 / 405
Lichtbreite unter dem Rahmen (cm) 80
Abstand der Pflugeinheiten (cm) 100
Empfohlene Arbeitsgeschwindigkeit (km/h) 7
Gewicht des Pfluges **
Scher (kg) 3045 3370 3695 3985 4310
Feder (kg) 3320 3705 4090 4435 -
Schlepper (kW) 106 - 132 130 - 170 160 - 210 180 - 240 200 - 280
Schlepper (PS) 145 - 180 175 - 230 215 - 270 240 - 320 270 - 380
Baukastensystem EUROPA 180
6+1+1+1 5+1+1+1+1******) diese Variante nur bei der Version 5R oder nach Kundenwunsch
AU
FSAT
TEL-
VOLL
DRE
HPF
LÜG
E
*) Nur bei der Variante mit der Scherbolzensicherung der Schare **) Das genannte Gewicht dient nur zur Orientierung und kann je nach gewählter Variante der Maschine variieren.
9
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
8
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
Anbaugeräte zu den Pflügen
Pflugpacker PLUTO IIDer Pflugpacker PLUTO ist eine Vorrichtung, die als Zusatzgerät zum Zerkleinern von Erdballen an die Pflüge angebaut wird. Somit werden in einem Arbeitsgang das Pflügen und die Vorbereitung der Aussaat in einem Arbeitsgang erledigt. Man kann ihn auch mit-hilfe der Dreipunktaufhängung direkt an den Schlepper anschlie-ßen. Der Boden wird beim Pflügen umgegraben, zerkleinert und das Porenvolumen erhöht. Da der Pflugpacker direkt hinter dem Pflug arbeitet, wird der aufgelockerte Boden unmittelbar nach dem Auflockern rückverfestigt. Größere Erdballen werden zerklei-nert. Dies fördert eine optimale Bodenstruktur und verhindert die Austrocknung des Bodens. Mit der Nockenringwalze erreicht man eine höhere Festigung der Oberfläche und zerkleinerte Struktur.
VORTEILE:• Neue Art der Arretierung der Haltearme garantiert eine si-
chere Befestigung im hügeligen Terrain.• Der robuste Haltearm ist mit einer Zugfeder ausgestattet,
die die Anstöße bei der Befestigung dämpft.• Das Baukastensystem der Konstruktion ermöglicht eine
einfache Änderung der Arbeitsbreite des Packers.• Die Reinigungsvorrichtung streift die anhaftende Erde von
den Rädern ab und verhindert eine Verstopfung.
TECHNISCHE PARAMETER
Arbeitsbreite (m) 1,6 1,8 2,0 2,2 2,6 3,0
Anzahl der Räder (St.) 17 19 21 23 27 31
Durchmesser der Schneideräder (cm) 70
Winkel vom Profil des Schneiderads (°) 34
Gewicht
Packer (kg) 1180 1340 1500 1640 1850 2050
Krümelwalze (kg) 430 459 510 580 672 765
SchollencrackerEine Innovation bei der Bodenbearbeitung – Reduzierung der Anzahl der Arbeitsgänge – ideale Lösung zum Kombinieren von ArbeitsabläufenÜberzeugende Vorteile:
• Schneiden und Planieren von groben Erdballen während des Pflügens.
• Das schnellere Abtrocknen ermöglicht eine frühzeitige Vor-bereitung des Bodens für die Aussaat.
• Bereitet den Boden für die anschließende Verwendung von aktiven sowie passiven Geräten für die Aussaat vor.
• Planierte Winterfurche ermöglicht ein frühzeitiges Na-chdüngen im Frühling.
• Liefert bessere Voraussetzungen für flache Bearbeitung des Bodens im Frühling, sichert gute Wasserwirtschaft
• Die Vorrichtung kann man über einen Scherbolzen- oder eine Non-Stop-Sicherung an Pflüge verschiedener Marken ankoppeln.
Serienmäßige Ausstattung • Planierschiene mit zentral einstellbaren Messern• Drehrahmen mit höhenverstellbaren Gelenkarmen• Regulierung der Arbeitstiefe – mechanisch bzw. hydraulisch
Der patentierte Schollencracker besteht aus einer höhenverstellba-ren Planierschiene, die mit Messern bestückt ist. Die Messer sind aus einem speziellen Stahl mit einer langen Gebrauchsdauer ge-fertigt. Der Anstellwinkel der Messerposition gegenüber der Fahrt-richtung kann über eine zentrale Steuerung geändert und an alle Bodenbedingungen angepasst werden. Der Schollencracker er-möglicht bei einem niedrigen Zugkraftbedarf wesentliche Einspa-rungen in der Vorbereitung des Bodens zu erzielen – zerkleinert die Erdschollen, planiert die Oberfläche, spart die Bodenfeuchte ein.
Anzahl der Schare Gewicht ca. kg
3 135
4 170
5 245
für jedes weitere Schar +70
AN
BAU
GER
ÄTE
ZU D
EN P
FLÜ
GEN
Kombinierter Kultivator SATURN III
KOM
BIN
IERT
ER K
ULT
IVAT
OR
Die kombinierten Kultivatoren SATURN III zeichnen sich durch eine progressive Technologie für eine tadellose Vorbereitung des Bodens vor der Aussaat aus. Durch die geeignete Kombi-nation der Arbeitsorgane erhält man ein homogenes Saatbeet innerhalb einer Feldfahrt. Es handelt sich um passive Kultivatoren für eine vollständige Vorbereitung des Saatbeets. Die gewünschte Arbeitsqualität erzielt man mit einer geringeren Anzahl an Arbeitsgängen als mit den bisher eingesetzten Maschinen (Eggen, Saatbettkombinationen), wobei man eine wesentlich höhere flächenmäßige Leistung erreichen wird, als mit Maschinen, die über eine Kardanwelle des Schleppers angetrieben werden. Bei der Arbeit wird die gewünschte Tiefe der Bodenlockerung erreicht, was besonders bei einer flachen Vorbereitung des Saatbeets, z. B. für Zuckerrüben oder Raps, benötig wird.
Zusammenstellung einer Maschine je nach den Bodenbedingungen des Kunden
• Scherbolzengesicherte Scharsek-tionen
• 2 Reihen von Stabkrümelwalzen Ø 265 mm (gegebenenfalls 330 mm)
• Federsektionen mit Pfeilpflug-scharen
• 2 Reihen von Stabkrümelwalzen Ø 265 mm (gegebenenfalls 330 mm)
Variante PR
• Stabstützwalzen (auf Wunsch Rohrstützwalzen) Ø 400 mm
• geeignet für feuchte Böden
Ausführung I
• Scherbolzengesicherte Schar-sektionen
• 2 Reihen von Stabkrümelwalzen Ø 265 mm (gegebenenfalls 330 mm)
geeignet für alle Bodenarten
Variante P
• Federsektionen mit Bodenmeißel• 2 Reihen von Stabkrümelwalzen
Ø 265 mm (gegebenenfalls 330 mm)
Variante Pe
Ausführung II
Variante S
geeignet für feuchte Böden mit hohem Grundwasserpegel, ev. für Arbeit bei den feuchten Bedingungen im Frühling geeignet für sehr steinige Böden
geeignet für Böden ohne Steine
• Crosskill Stützwalze aus Gusseisen mit 400 mm Durchmesser aus einem hochwerti-gen Formguss
• sichert die erneute Verfestigung des Bodens, zerbricht die restlichen Erdschollen und dank dem durchdachten System der Positionierung der Schaufel, sichert sie die Abtrennung der Erde so, dass im Endeffekt hinter der Maschine eine Struktur mit feinen Partikeln tiefer im Bodenprofil und größeren Partikeln auf der Oberfläche gebildet wird.
11
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
10
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
Der kombinierte Kultivator SATURN III wird in den Arbeitsbreiten von 3, 4, 5 und 6 Meter hergestellt. Bei einem durchschnittlichen Zugkraftbedarf von ca. 25-30 PS pro 1 m Arbeitsbreite ist der SATURN III für Schlepper mit einer Leistung von 80 – 240 PS bestimmt. Die Arbeitsbreite wird mit mehreren Sektionen mit einer Breite von 1,5 oder 2 m abgedeckt, so dass Unebenheiten des Ackerbodens ausgeglichen werden können. Die Geräte in der Arbeitsbreite von 3 und 4 Meter können als Anbau- oder Aufsattel-Geräte geliefert werden, die Varianten mit einer Breite von 5 und 6 Metern sind immer als Aufsattelgeräte, die auf 3 m Transportbreite hydraulisch klappbar sind, ausgeführt.
Grundausstattung: • Bodenlockerer der Schlepperspuren• 2 Reihen Krümelwalzen 265 mm, auf Wunsch 330 mm • 2 Reihen Planierschienen, immer hinter einer Walzenreihe positioniert• 4 Varianten von Arbeitssektionen• Crosskill Verfestigungswalze oder Stab- bzw. Rohrstützwalze• Warntafel
TECHNISCHE PARAMETER Saturn III 3 N
Saturn III 3 T
Saturn III 4 N
Saturn III 4 NH
Saturn III 4 T
Saturn III 4 TH
Saturn III 5 TH
Saturn III 6 TH
Arbeitsbreite (m) 3 3 4 4 4 4 5 6
Tiefe der Bodenlockerung (cm) 2-12 2-12 2-12 2-12 2-12 2-12 2-12 2-12
Anzahl der Pfeilflugschare (St.) 12+4 12+4 16+4 16+4 16+4 16+4 20+4 24+4
Anzahl der Kultureggezinke (St.) 36+4 36+4 48+4 48+4 48+4 48+4 60+4 72+4
Arbeitsgeschwindigkeit (km/h) 7-12 7-12 7-12 7-12 7-12 7-12 7-12 7-12
Transportbreite (m) 3 3 4 3 4 3 3,2 3,2
Transporthöhe (m) 1,22 1,22 1,22 2,5 1,22 2,5 2,5 2,5
Arbeitslänge (m) 2,9 6,1 2,9 2,9 6,1 6,1 6,2 6,2
Reifen/Radgröße - 10,0/75-15,3 - - 10,0/75-
15,310,0/75-
15,314,5/80-
1814,5/80-
18
Gewicht * (kg) 1835 2495 2315 2380 2920 2985 3825 4495
Schlepperleistung (PS) 74-110 74-110 100-130 100-130 100-130 100-130 125-160 150-190
N – angebaute Version, T – aufgesattelte Version, H – hydraulisch klappbar auf 3 m * gilt für die Variante P, Ausführung II
Kombinierter Kultivator für eine genaue Vorbereitung des Saatbeets
KOM
BIN
IERT
ER K
ULT
IVAT
OR
SATURN III
VARI
ABL
ER G
ERÄT
ETRÄ
GER
NEP
TUN
X
Variabler Geräteträger NEPTUN X
Der variable Geräteträger dient als Grundgerüst für Maschinen mit sehr großen Arbeitsbreiten durch das Ankuppeln von zwei An-baugeräten. Dadurch sind Arbeitsbreiten von 8 oder 10 m möglich. Auf das Fahrwerk können im Rahmen der flexiblen Lösungen der Firma OPaLL-AGRI s.ro. auch der kombinierte Kultivator SATURN III oder die Scheibenegge PEGAS aufgehängt werden. Die Verwendung eines Fahrwerks für beide Maschinentypen, bringt neben Platzersparnissen auch erhebliche finanzielle Vorteile mit sich. Der Geräteträger kann selbstverständlich auch mit Maschinen anderer Hersteller verwendet werden, wenn die Arbeitsgeräte die technischen Voraussetzungen erfüllen.
Grundausstattung: • Aufhängung: Zugvorrichtung der Kategorie 3/4 (bei NEPTUN 8 auf Wunsch K 80) • 2-Kreis-Druckluft• Reifengröße 560/45 –R22,5 • Warntafel
NEPTUN
TYPArbeitsbreite
HydraulikGewicht
(m) (kg)
NEPTUN X 8 8 ja 2570
NEPTUN X 10 10 ja 2800
13
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
12
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
Die kombinierten Kultivatoren NEPTUN - SATURN III werden in den Arbeitsbreiten von 8 und 10 Metern angeboten. Bei einem durch-schnittlichen Zugkraftbedarf von ca. 25-30 PS pro 1 m Arbeitsbreite sind sie für Schlepper mit einer Leistung von 220 – 360 PS bestimmt. Es handelt sich um 2 kombinierte Kultivatoren SATURN, die an den variablen Geräteträger NEPTUN X aufgehängt werden. Den Vorteil bildet dabei nicht nur die Verwendung eines Fahrwerks für mehrere Maschinen, sondern auch die Möglichkeit den SA-TURN III vom Fahrwerk abzuhängen und ihn als einzelne Maschine zu verwenden.Die Arbeitsbreite wird mit mehreren Sektionen mit einer Breite von 1,5 oder 2 m abgedeckt, so dass Unebenheiten des Ackerbodens ausgeglichen werden können.
Grundausstattung: • Bodenlockerer der Schlepperspuren• 2 Reihen Krümelwalzen 265mm, auf Wunsch 330 mm • 2 Reihen Planierschienen, immer hinter einer Walzenreihe positioniert• 4 Varianten von Arbeitssektionen• Crosskill Verfestigungswalze oder Stab- bzw. Rohrstützwalze• Warntafel
TECHNISCHE PARAMETER Neptun III 8 TH
Neptun III 10 TH
Arbeitsbreite (m) 8 10
Tiefe der Bodenlockerung (cm) 2-12 2-12
Anzahl der Pfeilflugschare (St.) 32+6 40+6
Anzahl der Kultureggezinke (St.) 96+6 120+6
Arbeitsgeschwindigkeit (km/h) 7-12 7-12
Transportbreite (m) 3 3
Transporthöhe (m) 3,85 3,85
Arbeitslänge (m) 6,1 6,7
Reifen/Radgröße 560/45-22,5 560/45-22,5
Gewicht * (kg) 6960 8530
Schlepperleistung (PS) 210-260 250-320
N – angebaute Version, T – aufgesattelte Version, H – hydraulisch klappbar auf 3 m * gilt für die Variante P, Ausführung II
KOM
BIN
IERT
ER K
ULT
IVAT
OR
Kombinierter Kultivator für eine genaue Vorbereitung des Saatbeets
NEPTUN – SATURN III
SCH
EIBE
NEG
GEN
Scheibeneggen NEPTUN - PEGAS
Die Scheibenegge NEPTUN - PEGAS ist ein universelles Ge-rät zur Bodenbearbeitung nach der Ernte mittels Schälen, aber auch in der Bodenbearbeitung vor der Aussaat. Die Scheibeneggen NEPTUN - PEGAS werden in der Arbeits-breite von 8 m angeboten. Dank dem durchschnittlichen Zugkraftbedarf von ca. 40 PS pro 1 m Arbeitsbreite sind sie für Schlepper mit einer Leistung von 280 - 360 PS be-stimmt. Es handelt sich um 2 Scheibeneggen PEGAS, die auf dem variablen Geräteträger NEPTUN 8 aufgehängt werden. Den Vorteil bildet dabei nicht nur die Verwendung eines Fahrwerks für mehrere Geräte, sondern auch die Möglich-keit den PEGAS vom Fahrwerk abzuhängen und ihn als einzelne Maschine zu verwenden. Die Scheibeneggen PEGAS werden mit der Scheibensiche-rung Gummiblöcke (Variante S) oder Federsicherung (Va-riante P) hergestellt. Arbeitstiefe der Maschine 4 -18 cm.
Grundausstattung: • Zwei Reihen von Zahnscheiben mit einem Durch-
messer von 560 mm • Wartungsfreie 2-Reihen-Kugellager • Aufprallplatte zwischen der 1. und der 2. Walzenrei-
he (ggf. Stableiste) • Rohrstützwalze 540 mm (ggf. Auswahl aus vielen
anderen Typen)
NEPTUN - PEGAS
TYPArbeitsbreite
Hydraulik Scheibenan-
zahlScheibendur-
chmesser Schlepperle-
istung Gewicht
(m) (ks) (mm) (PS) (kg)
NEPTUN - PEGAS 8S* 8 ja 64 560 300 6750
NEPTUN - PEGAS 8P* 8 ja 64 560 300 6210
*) hydraulisch klappbar auf 3 Meter
NEUHEIT
15
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
14
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
Die Scheibenegge PEGAS ist ein universelles Gerät zur Bodenbearbeitung nach der Ernte mittels Schälen, aber auch bei der Boden-bearbeitung vor der Aussaat.Die Scheibeneggen PEGAS werden in den Arbeitsbreiten 3, 4, 5 und 6 Meter hergestellt, dank dem durchschnittlichen Zugkraft be-darf von ca. 40 PS pro 1 m Arbeitsbreite, sind sie somit für Schlepper mit einer Leistung von 100 - 260 PS bestimmt. Die Scheibeneggen PEGAS werden mit der Scheibensicherung über Gummiblöcke (Variante S) oder Federsicherung (Variante P) hergestellt. Arbeitstiefe der Maschine 4 -18 cm.
PEGAS SScheibeneggen, die vor allem für Böden mit niedrigem Vorko-mmen von Steinen bestimmt sind. Sie zeichnen sich durch eine hohe Presskraft auf den Boden aus.
Grundausstattung: • Zwei Reihen von Zahnscheiben mit einem Durchmesser
von 560 mm • Sicherung der Scheiben über Gummiblöcke, sie sind ge-
gen das Ausfahren mechanisch gesichert• Wartungsfreie 2-Reihen-Kugellager• Aufprallplatte zwischen der 1. und der 2. Walzenreihe
(ggf. Stableiste) • Rohrstützwalze 540 mm (ggf. Auswahl aus vielen anderen
Typen)
PEGAS S
TYP
Arb
eits
brei
te
Hyd
raul
ik
Hyd
raul
ik
Dur
chm
esse
r de
r Sch
eibe
n
Schl
eppe
rlei
-st
ung
Gew
icht
(m) (Stk) (mm) (PS) (kg)
PEGAS - S 3,0 3 nein 24 560 110 1440
PEGAS - S 4,0 4 nein 32 560 150 2100
PEGAS - S 4,0* 4 ja 32 560 150 2500
PEGAS - S 5,0* 5 ja 40 560 190 2780
PEGAS - S 6,0* 6 ja 48 560 230 3110
* hydraulisch klappbar auf 3 Meter
PEGAS PScheibeneggen, die vor allem in die Bedingungen mit einem hohen Vorkommen von Steinen bestimmt sind, sie zeichnen sich durch eine hoch flexible Sicherung aus, die die Beschädi-gungswahrscheinlichkeit der Maschine verringert.
Grundausstattung: • Zwei Reihen von Zahnscheiben mit einem Durchmesser
von 560 mm • Sicherung der Scheiben über flexible Feder 100x13 mm • Wartungsfreie 2-Reihen-Kugelllager• Aufprallplatte zwischen der 1. und 2. Walzenreihe (ggf.
Stableiste) • Rohrstützwalze 540 mm (ggf. Auswahl aus vielen anderen
Typen)
PEGAS P
TYP
Arb
eits
brei
te
Hyd
raul
ik
Hyd
raul
ik
Dur
chm
esse
r de
r Sch
eibe
n
Schl
eppe
rlei
-st
ung
Gew
icht
(m) (Stk) (mm) (PS) (kg)
PEGAS - P 3,0 3 nein 24 560 110 1340
PEGAS - P 4,0 4 nein 32 560 150 1830
PEGAS - P 4,0* 4 ja 32 560 150 2390
PEGAS - P 5,0* 5 ja 40 560 190 2830
PEGAS - P 6,0* 6 ja 48 560 230 3100
* hydraulisch klappbar auf 3 Meter
NEUHEITNEUHEIT
SCH
EIBE
NEG
GEN
Scheibeneggen PEGAS
FLÜ
GEL
SCH
ARG
RUBB
ER
MERKUR III & TRITON
Der Flügelschargrubber MERKUR III ist zur Bodenbearbeitung nach der Ernte und zur Vorbereitung für die Aussaat der Zwischenfrucht bestimmt. Er ist auch nach der Zuckerrüben-, Mais- und Vorfruchternte einsetzbar, wenn für das klassische Pflügen keine Zeit bleibt. Nach der Ernte wird er zum Schälen, Zuackern von Mist, Stroh, grünem Dünger, zum Anfurchen sowie der Ausführung einer tiefen Bodenlockerung genutzt. Der robuste Tragrahmen trägt die Zinken, die mit einem Scherbolzen für Böden ohne Steine oder einem Federsystem für steinige Böden, Scheiben zum Mischen und Umdrehen der Erde ausgestattet sind, sowie eine Rohrstützwalze. Die Konstruktion des Grubbers bietet viel Platz zwischen den Pflugsäulen, somit kommt es nicht zum Verstopfen, auch nicht bei der Einarbeitung von Strohresten aus Mais und Zwischenfrucht.
Flügelschargrubber MERKUR IIIDer 2-Reihen-Flügelschargrubber sichert eine hochwertige Bo-denbearbeitung bei einer Arbeitstiefe von 8 – 18 cm, die lichte Wei-te unter dem Rahmen beträgt 80 cm und garantiert ausreichend Platz für den Durchgang auch größeren Mengen von Ernteresten. Der Flügelschargrubber MERKUR III wird in den Arbeitsbreiten von 2,2•3•3,8•4,8•5und6Meterhergestellt.Dankdemdurchschnitt-lichen Zugkraft bedarf von ca. 40 PS pro 1 m Arbeitsbreite ist er für Schlepper mit einer Leistung von 80 - 260 PS bestimmt. Grundausstattung: • zwei Reihen von Flügelscharen• Scheiben zum Wenden und Mischen der Erde, Durchmesser
465 mm • Rohrstützwalze 540 mm (ggf. Auswahl aus vielen anderen Typen)
MERKUR III
TYP
Arbe
itsbr
eite
Hydr
aulik
Sich
erun
g
Anza
hl d
er
Sche
iben
Durc
hmes
ser
der S
chei
ben
Schl
eppe
rlei-
stun
g
Gew
icht
(m) (Stk) (mm) (PS) (kg)
Merkur III 2,2 2,2 - S 5 4 60 800
Merkur III 2,2 2,2 - P 5 4 70 1010
Merkur III 3 3 - S 7 6 100 1090
Merkur III 3 3 - P 7 6 110 1330
Merkur III 3,8* 3,8 + S 9 8 150 1590
Merkur III 3,8* 3,8 + P 9 8 160 1990
Merkur III 4,8* 4,8 + S 11 10 160 2060
Merkur III 4,8* 4,8 + P 11 10 170 2250
Merkur III 5,6* 5,6 + S 13 12 200 2450
Merkur III 5,6* 5,6 + P 13 12 210 2940
S-Scherbolzensicherung•P-Federsicherung* hydraulisch klappbar auf 3 Meter
Flügelschargrubber TRITONDer dreireihige Flügelschargrubber garantiert eine hochwertige Bodenbearbeitung durch Schälen und einer tieferen Lockerung des Mutterbodens. Dank der austauschbaren Arbeitsorgane kann die Maschine im Bereich der Arbeitstiefe von 8 – 25 cm eingese-tzt werden, die lichte Weite von 80 cm unter dem Rahmen sichert ausreichend Platz für den Durchgang von größeren Mengen von Ernteresten. Der Flügelschargrubber TRITON wird in Arbeitsbreiten von3•4und4,8Meternhergestellt,dankdemdurchschnittlichenZugkraft bedarf von ca. 40 PS pro 1 m Arbeitsbreite ist er somit für chlepper mit einer Leistung von 80 - 260 PS bestimmt. Grundausstattung: • drei Reihen von variablen Scharen• Scheiben zum Umdrehen und Mischen der Erde, Durchmesser
465 mm • Rohrstützwalze 540 mm (ggf. Auswahl aus vielen anderen Typen)
TRITON
TYP
Arbe
itsbr
eite
Hydr
aulik
Sich
erun
g
Anza
hl d
er
Sche
iben
Durc
hmes
ser
der S
chei
ben
Schl
eppe
rlei-
stun
g
Gew
icht
(m) (Stk) (mm) (PS) (kg)
Triton 3 3 - S 10 8 120 1310
Triton 3 3 - P 10 8 140 1880
Triton 4,0* 4 + S 13 10 140 2190
Triton 4,0* 4 + P 13 10 180 3160
Triton 4,8* 4,8 + S 16 12 180 2860
Triton 4,8* 4,8 + P 16 12 220 3530
Flügelschargrubber
NEUHEITNEUHEIT
S-Scherbolzensicherung•P-Federsicherung * hydraulisch klappbar auf 3 Meter
17
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
16
PRO
DU
KTK
ATA
LOG
OPaLL-AGRI s
.r.o.
Die Cambridgewalzen sind ein weitverbreitetes Werkzeug, das bei einer Vielzahl von Feldarbeiten verwendet wird. Eingesetzt wer-den die Walzen nicht nur beim Walzen nach der Aussaat, sondern auch in der Bodenvorbereitung. Der Schwerpunkt im Herste-llungsprozess liegt vor allem in der Verwendung hochwertiger Materialen für die Räder, Bolzen sowie die Rahmenkonstruktion aus Gusseisen. Bei allen Typen werden Gussräder mit einem Durchmesser von 510 mm mit vier Felgen und hochwertigen Wellen mit einem Durchmesser von 60 mm verwendet.
Cambridgewalzen VEGADie Cambridgewalze VEGA zeichnet sich vor allem durch die einfache Konstruktion zusammen mit der Verwendung der besten Materialen aus. Das Aus- und Einklappen der Maschine erfolgt mechanisch durch zurück- bzw. vorfahren auf den Trans-porträdern. Die Arbeitsstellung wird dann mit einem Hydraulik-zylinder erreicht.
Cambridgewalzen VIRGODer Schwerpunkt der Cambridgewalzen VIRGO liegt vor allem auf dem maximalen Komfort und der Bedienungsfreundlich-keit. Die komplette Aufklappung der Maschine erfolgt über das hydraulische System. Die Umstellung aus der Transport- in die Arbeitslage ist somit schnell und ohne einen größeren zeit-lichen Aufwand. Die Maschine kann optional mit einer Spring-board Planierschiene ausgerüstet werden, die vor allem in der Vorbereitung vor der Aussaat Verwendung findet, um die grobe Furche zu bearbeiten.
VEGA
TYP
Arb
eits
brei
te
Schl
eppe
r-le
istu
ng
Gew
icht
Arb
eits
ge-
schw
indi
gkei
t
(m) (PS) (kg) (km/h)
VEGA 3P (angebaut) * 3 40 - 80 1200 4-12
VEGA 3 (angebaut) 3 40 - 80 800 4-12
VEGA 4,5 (aufgesattelt, klappbar) 4,5 70 -100 2050 4-12
VEGA 6 (aufgesattelt, klappbar) 6 80 - 130 2580 4-12
VEGA 6,3 (aufgesattelt, klappbar) 6,3 85 - 135 2960 4-12
VEGA B7 (aufgesattelt, klappbar) 7 90 - 140 3160 4-12
VEGA B9,2 (aufgesattelt, klappbar) 9,2 120 a více 4610 4-12
VIRGO
TYP
Arb
eits
brei
te
Schl
eppe
r-le
istu
ng
Gew
icht
Arb
eits
ge-
schw
indi
gkei
t
(m) (PS) (kg) (km/h)
VIRGO 6,3 6,3 95 (*160) 5950 10-13
VIRGO 8,3 8,3 150 (*210) 4550 10-13* bei der Verwendung der Springboard Planierschiene
* Einsatz auch als frontal angebaute Maschine, befestigt in die vordere Hydraulik.
CA
MBR
IDG
EWA
LZEN
Cambridgewalzen VEGA & VIRGO
Ploughing is the cornerstone of traditional tillage technology.Simply said, this is a working operation that turns the soil, mixes and aerates it. The importance of ploughing, however, goes much further and even today it has a unique place in modern agronomy and agricultural technology. Given the wide range of tractors, and also depending on the size of the land, OPaLL-AGRI produces 4 basic types of plough. These are the JUPITER II 120 and JUPITER II 140 mounted ploughs and the ORION 180 and EUROPA II 180 semi-mounted ploughs.
The benefits of ploughing with a plough:• Turning of topsoil
� Bringing structural soil to the surface � Bringing up nutrients that were drifted to the bottom of the topsoil
• Loosening up the topsoil � Better infiltration of precipitation � Aeration – change of the humification processes into the mineralization process -forming nutrients � It prevents soil compaction due to the use of heavy agricultural equipment
• Working in crop residues, manure and fertilizers � Saving ammonia � The conversion of organic matter into nutrients and humus
• The effect on phytopathology � Working in crop residues prevents the development of diseases � Along with plant residues, pests and weeds are also washed into the soil � As one of the few technologies which reliably kills rodents
OPaLL-AGRI REVERSIBLE PLOUGHS
What is important for proper assessment of ploughing, is its quality, which is significantly affected not only by the design of the plough, but also by proper selection of plough bodies. The assortment of OPaLL-AGRI s.r.o. includes 6 types of plough bodies. A pr-operly selected type of plough body guarantees a good job in the particular soil conditions – good slice crumbling and high-quality covering of crop residues.
For high quality ploughing, it is also necessary to comply with the limit plough ratio, i. e. the ratio of the depth of ploughing and the ploughing width of one ploughshare. The engaging plough body width should be at least 1.27 times greater than the depth of ploughing.
Types of plough bodies:Plough bodies intended for lighter to medium soils, but also heavier crumbly soil.
Plough bodies intended for medium soils, but also heavier crumbly soils with a ploughing depth greater than 25 cm.
UN 400
Plough bodies suitable for medium and heavy cohesive soils.
PA 400
Plough bodies intended for heavy to very heavy soils.
OV XL
Plough bodies intended for medium to very heavy soils.
KV 9
Plough bodies intended for heavy to very heavy soils, they will also find application in the case of using tyres 710 mm wide and wider.
KV 28
UN 350
Type UN 350
universalUN 400 universal
PA 400 slatted
OV XL semihelicoidal
KV 9 semihelicoidal
KV 28 semihelicoidal
Maximum depth of ploughing
- without cutting coulters (сm) 28 32 32 28 28 28
- with cutting coulters (сm) 33 36 36 33 33 33
19
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
18
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
MO
UN
TED
REV
ERSI
BLE
PLO
UG
HS
OPaLL-AGRI JUPITER II 120 mounted ploughs are designed especially for lower power class tractors. Thanks to the 3 + 1 modular sys-tem they can be connected to tractors from approximately 70 k, while its design stresses the reduction in weight of the plough while maintaining optimum mechanical properties. For this reason, they are also preferred for tractors with a light front part, in particular with four-cylinder engines. The basic equipment includes the frame of the profile 120x120x10mm with a mechanical variable system for changing the cutting width of the plough bodies. Depending on the type of tractor and the quantity of crop residues, JUPITER II 120 ploughs are produced with spacing of 90 cm and 100 cm between the plough bodies. Ploughs can be fitted with two types of protection against damaging the bodies - shearhub or spring mechanism. The depth wheel can be exchanged for the combined wheel, which can be used for transport.By using a «memory» cylinder, we have reduced the need for lift height and load of arms of the tractor from side shocks, while maintaining maximum operator comfort due to one hydraulic circuit during the process of plough rotation.
TECHNICAL PARAMETERS JUPITER II 120/90 JUPITER II 120/100
Number of ploughshares (pcs) 3 4 3 4
Working width of one ploughshare (cm) 30 / 35 / 40 33 / 39 / 44
Total working width of the plough (cm) 90 / 105 / 120 120 / 140 / 160 99 / 117 / 132 132 / 156 / 176
Clearance under the frame (cm) 80 80
Spacing between the plough units (cm) 90 100
Recommended operating speed (km / h) 7 7
Plough weight *
shearing (kg) 965 1175 970 1180
spring (kg) 1140 1395 1145 1400
Tractor (kW) 52 - 70 70 - 88 52 - 70 70 - 88
Tractor (k, hp) 72 - 95 95 - 120 72 - 95 95 - 120
*) The weight is only indicative and may vary according to the selected machine
JUPITER II 120Mounted reversible ploughs
OPaLL - AGRI JUPITER II 140 mounted ploughs are designed to be connected to larger heavier tractors. Thanks to the 4 + 1 modular system and robust design, they are particularly suitable for large farms and agricultural businesses. These ploughs are recommended for tractors with an output of 125 hp and above.The basic equipment includes the frame of the profile 140x140x10mm with a mechanical variable system for changing the cutting width of the plough bodies. Depending on the type of tractor and the quantity of crop residues, JUPITER II 140 ploughs are produced with spacing of 90 cm and 100 cm between the plough bodies. Ploughs can be fitted with two types of protection against damaging the bodies - shearhub or spring mechanism. The dep-th wheel can be exchanged for the combined wheel, which can be used for transport.By using a «memory» cylinder, we have reduced the need for lift height and load of arms of the tractor from side shocks, while maintaining maximum operator comfort due to one hydraulic circuit during the process of plough rotation.
TECHNICAL PARAMETERS JUPITER II 140 / 90 JUPITER II 140 / 100
Number of ploughshares (pcs) 4 5 4 5
Working width of one ploughshare (cm) 30 / 35 / 40 / 45 / 50 30 / 35 / 40 / 45 / 50
Total working width of the plough (cm) 120 / 140 / 160 / 180 / 200
150 / 175 / 200 / 225 / 250
120 / 140 / 160 / 180 / 200
150 / 175 / 200 / 225 / 250
Clearance under the frame (cm) 80 80
Spacing between the plough units (cm) 90 100
Recommended operating speed (km / h) 7 7
Plough weight *
shearing (kg) 1445 1670 1455 1680
spring (kg) 1625 1895 1635 1905
Tractor (kW) 66 - 118 85 - 130 66 - 118 85 - 130
Tractor (k, hp) 90 - 160 115 - 175 90 - 160 115 – 175
*) The weight is only indicative and may vary according to the selected machine
JUPITER II 140Mounted reversible ploughs
MO
UN
TED
REV
ERSI
BLE
PLO
UG
HS
21
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
20
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o. OPaLL - AGRI ORION 180 semi-mounted ploughs are designed to be connected to tractors with
an output of 145 hp and above. The rotation of the plough is ensured by two hydraulic pistons mounted on the rocker mechanism. The modular construction of the plough frame makes it pos-sible to produce the variant of 5-9 plough bodies, while at any time during use it can be shortened or extended. Thanks to the unique design, subject to the change of the number of plough bodies, the position of supporting wheels can be adjusted, or to a supporting wheel that can be set to finish ploughing the edges of the land with the last ploughshare. The basic equipment includes the frame of the profile 180x180x10mm with a mechanical variable system for changing the cutting width of the plough bodies. The angle of the front body is adjusted through a hydraulic circle of the operator cabin.When using the plough on sloping terrain, the supporting wheel can be turned so as to prevent the back of the plough from sliding diagonally down the slope.
TECHNICAL PARAMETERS
Number of ploughshares (pcs) 5 6 7 8 9*
Working width of one ploughshare (cm) 35 / 40 / 45
Total working width of the plough (cm) 175 / 200 / 225 210 / 240 / 270 245 / 280 / 315 280 / 320 / 360 315 / 360 / 405
Clearance under the frame (cm) 80
Spacing between the plough units (cm) 100
Recommended operating speed (km / h) 7
Weight of the plough **
shearing (kg) 2790 3115 3440 3730 4055
spring (kg) 3065 3450 3835 4180 -
Tractor (kW) 106 - 132 130 - 170 160 - 210 180 - 240 200 - 280
Tractor (hp) 145 - 180 175 - 230 215 - 270 240 - 320 270 - 380
*) Only for variants with shear protection of the ploughshares**) The weight is only indicative and may vary according to the selected machine
Modular system ORION 180
6+1+1+1 5+1+1+1+1******) This variant only with version 05R or customized
The system of the rotation of the ORION 180 semi-mounted plough
SEM
I-MO
UN
TED
REV
ERSI
BLE
PLO
UG
HS
ORION 180Semi-mounted reversible ploughs
OPaLL - AGRI EUROPA II 180 semi-mounted ploughs are designed to be connected to tractors with an output of 145 hp and above. The rotation of the plough is ensured by two hydraulic pistons mounted on the rocker mechanism. The modular construction of the plough frame makes it pos-sible to produce the variant of 5-9 plough bodies, while at any time during use it can be shortened or extended. Thanks to the unique design, subject to the change of the number of plough bodies, the position of supporting wheels can be adjusted, or to a supporting wheel that can be set to finish ploughing the edges of the land with the last ploughshare. The basic equipment includes the frame of the profile 180x180x10mm with a mechanical variable system for changing the cutting width of the plough bodies. The angle of the front body is adjusted through a hydraulic circle of the opera-tor cabin. When using the plough on sloping terrain, the supporting wheel can be turned so as to prevent the back of the plough from sliding diagonally down the slope.
The system of the rotation of the EUROPA II semi-mounted plough
TECHNICAL PARAMETERS
Number of ploughshares (pcs) 5 6 7 8 9*
Working width of one ploughshare (cm) 35 / 40 / 45
Total working width of the plough (cm) 175 / 200 / 225 210 / 240 / 270 245 / 280 / 315 280 / 320 / 360 315 / 360 / 405
Clearance under the frame (cm) 80
Spacing between the plough units (cm) 100
Recommended operating speed (km / h) 7
Weight of the plough **
shearing (kg) 3045 3370 3695 3985 4310
spring (kg) 3320 3705 4090 4435 -
Tractor (kW) 106 - 132 130 - 170 160 - 210 180 - 240 200 - 280
Tractor (hp) 145 - 180 175 - 230 215 - 270 240 - 320 270 - 380
Modular system EUROPA 180
6+1+1+1 5+1+1+1+1******) This variant only with version 05R or customized
*) Only for variants with shear protection of the ploughshares**) The weight is only indicative and may vary according to the selected machine
EUROPA II 180Semi-mounted reversible ploughs
SEM
I-MO
UN
TED
REV
ERSI
BLE
PLO
UG
HS
23
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
22
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
The PLUTO furrow press is a device that is used as an additional tool to ploughs for crumbling slice, so ploughing with complete sowing preparation is performed in one operation. It is also con-nectable directly to the tractor, using a three-point hitch. When ploughing the soil is loosened, crumbled, and the volume of the pores increases. Because the furrow press works directly behind the plough, its work is indispensable. At the most opportune mo-ment, at the optimum moisture, the soil at the depth of bedrock is reinforced again and large lumps are crumbled. Forming of the optimal soil structure is facilitated and its drying is prevented. Crumbling then ensures a larger surface compaction and its crumbly structure.
BENEFITS:• A new way of arresting the pick-up arms ensures reliable
pick up even on hilly terrain• The plough’s robust pick-up arm is equipped with a tension
spring which absorbs the shock of capture• Modular system design makes it possible to easily adjust
the working width of the furrow press • The cleaning device cuts the stuck land from the wheels
and prevents their clogging
TECHNICAL SPECIFICATIONS
Working width (m) 1,6 1,8 2,0 2,2 2,6 3,0
Number of wheels (pcs) 17 19 21 23 27 31
Diameter of the cutting wheels (cm) 70
Angle of the profile of the cutting wheels (°) 34
Weight
Press (kg) 1180 1340 1500 1640 1850 2050
Crumbling roller (kg) 430 459 510 580 672 765
Innovation in soil cultivation – a reduction in the number of op-erations - Ideal for combining working processes
Convincing advantages:• Cutting and alignment of coarse lumps directly during
ploughing• Faster drying of the soil allows early land preparation for
sowing• Preparing the ground for the subsequent use of active and
passive tools for sowing soil preparation• The levelled winter furrow allows early spring fertilization• It ensures the best conditions for spring shallow cultivation
of the soil, which maintains soil structure and ensures good water management
• The devices can be mounted to the ploughs with shear or non-stop protection of different brands
Standard equipment• Levelling bar with centrally adjustable knives• Rotating frame with height- adjustable articulated arm• Mechanical or hydraulic control of working depth
The patented clod crusher consists of height- adjustable levelling bar mounted with blades made of special steel with long life. The position of the blades to the angle to the axis of the drive can be changed by central control and adapted for all soil condi-tions. At low drawbar consumption, the clod crusher allows you to achieve significant savings in land preparation – it reduces lumps, levels the surface and saves soil moisture.
Number of ploughshares weight ca. kg
3 135
4 170
5 245
per each additional ploughshare +70
CON
NEC
TIN
G D
EVIC
ES F
OR
PLO
UG
HS
Connecting devices for ploughs
Furrow press PLUTO II
Clod crusher
The SATURN III combined cultivators are representatives of advanced technology for perfect sowing soil preparation. A suitable combination of working bodies results in creating a uniform seedbed during one crossing of the field. These are passive cultivators for complete seedbed preparation. The required quality of work is achieved with fewer operations than with existing machines (gate, combine cultivators) while achieving substantially greater area efficiency than with machines driven by power take-off shaft tractor. During work, the accurate required depth of loosening is maintained, which is especially necessary in shallow seedbed preparation, such as for sugar beet or rape.
Assembling of the machine according to the customer’s soil conditions
• blade working sections with shear protection
• 2 rows of bar crumbler rollers Ø 265 mm (or 330 mm )
• spring working sections with arrow protection
• 2 rows of bar crumbler rollers Ø 265 mm (or 330 mm )
Option PR
Type I
• blade working sections with spring protection
• 2 rows of bar crumbler rollers Ø 265 mm (or 330 mm )
suitable for all kinds of soils
Option POption S
Option Pe
Type II
Suitable for damp soils with a high level of groundwater, or for work in wet spring conditionssuitable for rocky soils
suitable for soils without stones
• cast iron crosskill supporting roller Ø 400 mm made of high quality ductile cast iron
• provides for the re-compaction of soil, crushes remaining lumps and due to its ingenious system of blade placement, it ensures the separation of soil for a machine created soil structure with finer particles below the soil profile and larger particles on the surface.
COM
BIN
ED C
ULT
IVAT
ORS
• bar (optional pipe) supporting roller Ø 400 mm with chisel tines
• suitable for damp soils
• spring working sections with chisel protection
• 2 rows of bar crumbler rollers Ø 265 mm (or 330 mm )
Combined cultivator SATURN III
25
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
24
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o. The SATURN III combined cultivator is produced in working widths of 3, 4, 5 and 6 metres, and at an average need of drawbar pull of
25-30 hp per 1 metre of working width, it is designed to be mounted to tractors with an output of 80 to 240 hp.The working width is always made up of several sections of 1.5 or 2 m to enable copying the terrain unevenness hand-in-hand with sufficient levelling of the cultivated surface. Machines with the working width of 3 and 4 metres are available as mounted or semi-mounted options, the machine with the working width of 5 and 6 metres is always a semi-mounted hydraulic folding option with a transport width of 3 m.
Basic equipment:• Cultivators of the tracks behind the tractor wheels• 2 rows of crumbling rollers 265 mm, optional 330 mm• 2 levelling bars always placed behind the row of rollers• 4 options of working sections• Treader crosskill or supporting tube or bar roller• Traffic signs
TECHNICAL PARAMETRES Saturn III 3 N
Saturn III 3 T
Saturn III 4 N
Saturn III 4 NH
Saturn III 4 T
Saturn III 4 TH
Saturn III 5 TH
Saturn III 6 TH
Working width (m) 3 3 4 4 4 4 5 6
Loosening depth (cm) 2-12 2-12 2-12 2-12 2-12 2-12 2-12 2-12
Number of arrow blades (pcs ) 12+4 12+4 16+4 16+4 16+4 16+4 20+4 24+4
Number chisel blades (pcs ) 36+4 36+4 48+4 48+4 48+4 48+4 60+4 72+4
Working speed ( km / h ) 7-12 7-12 7-12 7-12 7-12 7-12 7-12 7-12
Transport width (m) 3 3 4 3 4 3 3,2 3,2
Transport height (m) 1,22 1,22 1,22 2,5 1,22 2,5 2,5 2,5
Transport length (m) 2,9 6,1 2,9 2,9 6,1 6,1 6,2 6,2
Size of tyres / wheels - 10,0/75-15,3 - - 10,0/75-
15,310,0/75-
15,314,5/80-
1814,5/80-
18
Weight* (kg) 1835 2495 2315 2380 2920 2985 3825 4495
Tractor output (hp) 74-110 74-110 100-130 100-130 100-130 100-130 125-160 150-190
N – mounted option, T – semi-mounted option, H - hydraulic folding 3m * valid for option P, Type II
SATURN IIICombined cultivator for accurate seedbed preparation
COM
BIN
ED C
ULT
IVAT
ORS
The system tool carrier serves as a chassis to create a machine of a significant working width by employing two mounted machines. The technical solution of the carrier makes it possible to form an aggregation with the working width of 8 or 10 m. Within the sys-tem solution of the OPaLL-AGRI s.r.o., the SATURN III combined cultivator or Pegas disc harrows can be hung on the chassis. The big advantage is that the use one chassis for both types of machines means considerable cost savings. The carrier can also be mounted to machines from other producers if their technical characteristics allow for that.
Basic equipment: • Hitch: Hitch Category 3/4 (with NEPTUN 8, optional K 80) • Dual circuit air brakes• Tyre size 560/45 R22-5 • Traffic signs
NEPTUN
TYPEworking width
HydraulicsWeight
(m) (kg)
NEPTUN X 8 8 yes 2570
NEPTUN X 10 10 yes 2800
SYST
EM T
OO
L CA
RRIE
R N
EPTU
NE
X
NEPTUN XSystem tool carrier
27
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
26
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o. The NEPTUN - SATURN III combined cultivator is produced in working widths of 8 and 10 metres, and at an average need of drawbar
pull of 25-30 hp per 1 metre of working width, it is designed to be mounted to tractors with an output of 220 to 360 hp. These are 2 SATURN combined cultivators mounted on the NEPTUN X system carrier.The advantage of this aggregation is not only using one chassis for multiple machines, but also the possibility to disconnect the SATURN III from the chassis and use it separately as two machines with half the width.The working width is always made up of several sections of 1.5 or 2m to enable copying the terrain unevenness hand-in-hand with sufficient levelling of the cultivated surface.
Basic equipment:• Cultivators of the tracks behind the tractor wheels• 2 rows of crumbling rollers 265 mm, optional 330 mm• 2 levelling bars always placed behind the row of rollers• 4 options of working sections• Treader crosskill or supporting tube or bar roller• Traffic signs
TECHNICAL PARAMETRES Neptun III8 TH
Neptun III10 TH
Working width ( m ) 8 10
Loosening depth (cm ) 2-12 2-12
Number of arrow blades (pcs) 32+6 40+6
Number of chisel blades (pcs) 96+6 120+6
Working speed ( km / h ) 7-12 7-12
Transport width ( m ) 3 3
Transport height ( m ) 3,85 3,85
Transport length ( m ) 6,1 6,7
Size of tyres / wheels 560/45-22,5 560/45-22,5
Weight* (kg ) 6960 8530
Tractor output ( hp ) 210-260 250-320
N – mounted option, T – semi-mounted option, H - hydraulic folding 3m * valid for option P, Type II
COM
BIN
ED C
ULT
IVAT
ORS
NEPTUN - SATURN IIICombined cultivator for accurate seedbed preparation
NEPTUN - PEGAS disc harrows are universal tools for post--harvest cultivation of the soil by breaking; they can also be used for seedbed preparation. NEPTUN - PEGAS disc harrows are produced with the working width of 8 met-res, and at an average need of drawbar pull of 40 hp per 1 metre of working width, they are designed to be moun-ted to tractors with an output of 280 to 360 hp.These are 2 PEGAS disc harrows hung on the NEPTUN 8 system carrier. The advantage of this aggregation is not only using one chassis for multiple machines, but also the possibility of disconnecting the PEGAS from the chassis and using it separately as 2 machines with a half working width.PEGAS disc harrows are produced with disc protection through silentblock rollers (option S) or with spring pro-tection (option P).Depth of machine work 4 -18 cm.
Basic equipment:• Two rows of serrated discs with a diameter of 560 mm• Maintenance-free double ball bearings• Impact strip between the 1st and 2nd row of rollers
(or strip bar )• Supporting tubular roller 540 mm (or selection of
many other types )
NEPTUN - PEGAS
TYPEworking
width HydraulicsNumber of
DiscsDisc
DiameterTractor output Weight
(m) (pcs) (mm) (hp) (kg)
NEPTUN – PEGAS 8S* 8 yes 64 560 300 6750
NEPTUN – PEGAS 8P* 8 yes 64 560 300 6210
* Hydraulically foldable to 3 metres
DIS
C H
ARR
OW
S
NEWNEPTUN – PEGAS Disc harrows
29
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
28
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
PEGAS disc harrows are universal tools for post-harvest cultivation of the soil by breaking; they can also be used for seedbed prepara-tion. PEGAS disc harrows are produced with the working width of 3, 4, 5 and 6 metres, and at an average need of drawbar pull of 40 hp per 1 metre of working width, they are designed to be mounted to tractors with an output of 100 to 260 hp.PEGAS disc harrows are produced with disc protection through silentblock rollers (option S) or with spring protection (option P).Depth of machine work 4 -18 cm.
DIS
C H
ARR
OW
S
PEGAS Disc harrows
PEGAS SDisc harrows particularly suited for conditions with a low inci-dence of stones are characterized by high press on the soil.
Basic equipment:• Two rows of serrated discs with a diameter of 560 mm• Disc protection through silentblock rollers mechanically
secured against sliding out• Maintenance-free double ball bearings• Impact board between the 1st and 2nd row of rollers (or
strip bar)• Supporting tubular roller 540 mm (or selection of many
other types )
PEGAS S
TYPE
wor
king
wid
th
Hyd
raul
ics
Num
ber o
f Dis
cs
Dis
c D
iam
eter
Trac
tor o
utpu
t
Wei
ght
(m) (pcs) (mm) (hp) (kg)
PEGAS - S 3,0 3 no 24 560 110 1440
PEGAS - S 4,0 4 no 32 560 150 2100
PEGAS - S 4,0* 4 yes 32 560 150 2500
PEGAS - S 5,0* 5 yes 40 560 190 2780
PEGAS - S 6,0* 6 yes 48 560 230 3110
* Hydraulically foldable to 3 metres
PEGAS PDisc harrows particularly suited for conditions with a high inci-dence of stones are characterized by a highly flexible protection which limits potential damage of the machine.
Basic equipment:• Two rows of serrated discs with a diameter of 560 mm• Disc protection through springs 100x13 mm• Maintenance-free double ball bearings• Impact board between the 1st and 2nd row of rollers (or
strip bar)• Supporting tubular roller 540 mm (or selection of many
other types )
PEGAS P
TYPE
wor
king
wid
th
Hyd
raul
ics
Num
ber o
f Dis
cs
Dis
c D
iam
eter
Trac
tor o
utpu
t
Wei
ght
(m) (pcs) (mm) (hp) (kg)
PEGAS - P 3,0 3 no 24 560 110 1340
PEGAS - P 4,0 4 no 32 560 150 1830
PEGAS - P 4,0* 4 yes 32 560 150 2390
PEGAS - P 5,0* 5 yes 40 560 190 2830
PEGAS - P 6,0* 6 yes 48 560 230 3100
* Hydraulically foldable to 3 metres
NEW NEW
The MERKUR III tine cultivator is designed for tillage after the harvest of cereals and preparation for sowing catch crops. It is also suitable for harvesting sugar beet, maize and pre-crop when there is not enough time for conven-tional tillage. After harvesting, it is used for breaking, ploughing in manure, straw, green manure and for furrow-ing as well as for deep loosening.The robust support frame carries arrow ploughshares secured with a shear bolt for soil without stones, or spring system for rocky land, mixing and turning discs and the tubular support roller. The cultivator design provides a large space between the tines, thereby preventing clogging even while processing residues of straw from maize and catch crops. TI
NE
CULT
IVAT
ORS
MERKUR III & TRITONTine cultivators
The MERKUR III tine cultivatorTwo-row cultivator ensures quality tillage within the extent of the working depth of 8-18 cm, 80 cm clearance under the frame pro-vides sufficient space for the passage of even a larger amount of crop residues. The MERKUR III tine cultivator is produced with the workingwidthof2.2•3•3.8•4.8•5and6metres.At an average need of drawbar pull of 40 hp per 1 metre of work-ing width, they are designed to be mounted to tractors with an output of 80 to 260 hp.Basic equipment:
• Two rows of wing ploughshares• Turning and mixing discs diameter 465 mm• Supporting tubular roller 540 mm (or selection of many
other types)
MERKUR III
TYPE wor
king
w
idth
Hydr
aulic
s
Prot
ectio
n
Num
ber o
f Di
scs
Disc
Dia
met
er
Trac
tor
outp
ut
Wei
ght
(m) (pcs) (mm) (hp) (kg)
Merkur III 2,2 2,2 - S 5 4 60 800
Merkur III 2,2 2,2 - P 5 4 70 1010
Merkur III 3 3 - S 7 6 100 1090
Merkur III 3 3 - P 7 6 110 1330
Merkur III 3,8* 3,8 + S 9 8 150 1590
Merkur III 3,8* 3,8 + P 9 8 160 1990
Merkur III 4,8* 4,8 + S 11 10 160 2060
Merkur III 4,8* 4,8 + P 11 10 170 2250
Merkur III 5,6* 5,6 + S 13 12 200 2450
Merkur III 5,6* 5,6 + P 13 12 210 2940
S–shear•P–spring*Hydraulicallyfoldableto3metres
The TRITON tine cultivatorThree-row cultivator ensures quality tillage both in the form of breaking and deeper cultivation of the topsoil. Due to replace-able working bodies, the machine can be used within the extent of the working depth of 8-25 cm, 80 cm clearance under the frame provides sufficient space for the passage of even a larger amount of crop residues. The TRITON tine cultivator is produced with the workingwidthof3•4and4.8metres;atanaverageneedofdraw-bar pull of 40 hp per 1 metre of working width, they are designed to be mounted to tractors with an output of 80 to 260 hp.Basic equipment:
• Three rows of variable ploughshares• Turning and mixing discs diameter 465 mm• Supporting tubular roller 540 mm (or selection of many
other types)
TRITON
TYPE wor
king
w
idth
Hydr
aulic
s
Prot
ectio
n
Num
ber o
f Di
scs
Disc
Dia
met
er
Trac
tor
outp
ut
Wei
ght
(m) (pcs) (mm) (hp) (kg)
Triton 3 3 - S 10 8 120 1310
Triton 3 3 - P 10 8 140 1880
Triton 4,0* 4 + S 13 10 140 2190
Triton 4,0* 4 + P 13 10 180 3160
Triton 4,8* 4,8 + S 16 12 180 2860
Triton 4,8* 4,8 + P 16 12 220 3530
NEW NEW
S–shear•P–spring*Hydraulicallyfoldableto3metres
31
OPaLL-AGRI s
.r.o.
30
PRO
DU
CT
CATA
LOG
UE OPaLL-AGRI s
.r.o.
Cambridge rollers are widespread tools applied in a wide range of field work; they are not only used for rolling after sowing, but also for seedbed soil preparation. During the manufacturing process, emphasis was placed on the use of quality materials, such as alloy wheels, as well as pivots and frame structure. For all types, alloy wheels of the diameter of 510 mm with four spokes and high-quality shafts of the diameter of 60 mm are used.CA
MBR
IDG
E RO
LLER
S
OPaLL-AGRI s.r.o. is a traditional manufacturer of wearing spare parts. Many years of experience, high quality workshop equip-ment and application of material refining technology allow us to offer products with top parameters. Our production portfolio includes wearing spare parts for land cultivating machines of various types and brands, particularly for ploughs, shovel culti-vators and many others. Our active trading activities enable us to offer also spare parts for other machines from your fleet – in each case at favourable prices and with short delivery time.
The spare parts can be purchased or ordered from our ware-houses.
They can also be ordered from our new e-shop at www.opall-agri.cz.
WarehouseTeillager Hertice 7, okr. Opava tel: +420 553 786 167
www.opall-agri.cze-shop www.opall-agri.cz
Die Gesellschaft OPaLL-AGRI s.r.o. ist ein traditioneller Hersteller von Verschleißteilen. Dank langjähriger Erfahrungen und einer hochwertigen Werkstattausrüstung zur Materialveredelung er-zielen unsere Erzeugnisse die besten Produkteigenschaften. In unserem Produktportfolio finden Sie Verschleißteile für boden-bearbeitende Landmaschinen vieler verschiedenen Typen und Marken, vor allem für Pflüge, Bodenlockerer und viele andere. Dank der aktiven Handelspolitik bieten wir ebenfalls Ersatzteile für weitere Maschinen aus Ihrem Maschinenpark an, und zwar immer zu günstigen Preisen mit einer möglichst kurzen Liefer-zeit.
Die Ersatzteile können Sie über den Fachhandel erwerbe. Aus-künfte erteilt Ihnen auch gerne unser Importeur.
VEGA & VIRGOCambridge rollers
VEGA Cambridge rollers VEGA Cambridge rollers place particular emphasis on simplicity of design hand-in-hand using the best materials. The machine is unfolded mechanically using wheel balancing, thus ensuring balanced opening of the machine and then using the hydraulic roller for tilting to the working position.
VIRGO Cambridge rollersVIRGO Cambridge rollers place particular emphasis on maxi-mum operator comfort. Complete disassembly of the machine is ensured through the hydraulic system. Transforming from transport to working position is fast and time-saving. Due to the machine construction, the flexible shear can be placed in front of the machine, which can be applied especially in seedbed pre-paration for the demolition of coarse furrows.
VEGA
TYPE
wor
king
w
idth
Trac
tor
outp
ut
Wei
ght
Wor
king
sp
eed
(m) (hp) (kg) (km/h)
VEGA 3P (mounted) * 3 40 - 80 1200 4-12
VEGA 3 (mounted) 3 40 - 80 800 4-12
VEGA 4,5 (semi-mounted, tilt.) 4,5 70 -100 2050 4-12
VEGA 6 (semi-mounted, tilt.) 6 80 - 130 2580 4-12
VEGA 6,3 (semi-mounted, tilt.) 6,3 85 - 135 2960 4-12
VEGA B7 (semi-mounted, tilt.) 7 90 - 140 3160 4-12
VEGA B9,2 (semi-mounted, tilt.) 9,2 120 a více 4610 4-12
VIRGO
TYPE
wor
king
wid
th
Trac
tor
outp
ut
Wei
ght
Wor
king
spe
ed
(m) (hp) (kg) (km/h)
VIRGO 6,3 6,3 95 (*160) 5950 10-13
VIRGO 8,3 8,3 150 (*210) 4550 10-13* When using flexible shear
* It can also be used as a front mounted machine attached to the front hydraulics
SPARE PARTSERSATZTEILE
HerticeDolní Životice
w w w . o p a l l - a g r i . c z
OPaLL-AGRI, s.r.o.747 55 Hertice 7, okr. Opava
Czech RepublicTel.: +420 553 786 165-6
e-mail: opall-agri@opall-agri.cz