Post on 06-Dec-2021
Marcegaglia USA
The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh).
It is devoted to the manufacturing of stainless steel, duplex and high nickel alloy pipe and tubing, as well as galvanized tubular products for a wide range of applications.
Munhall, Pennsylvania
We also supply a wide range of round, square and rectangular ornamentalwhich is produced at our facility in Munhall, and at the Marcegaglia facility in Forli, Italy.All the US based production is marketed by the Marcegaglia USA sales offi ce. Marcegaglia USA distributes its range of products throughout North and South America.
The production facility spreads over an overall surface of 31 acres, with a covered area of over 300,000 sq/ft.
The facility, employing over 130 workers, has a yearly output capacity of over 60,000 tons of fi nished product.
Production lines
11
1
22
2
3
3
1
2
3
16 tube production lines
Finishing and testing:
3 off line eddy current stations
3 cutoff
1 pickle tank
1 offl ine annealing furnace
2 straighteners
3 polishers
Warehouse
Welding technologies
HIGH FREQUENCYINDUCTION WELDING 2 production lines
LASER WELDING 8 production lines TIG WELDING 6 production lines
Stainless steel pipe and tubing for industrial applications
pulp and paper, petrochemical,food and beverage, brewing, automotive,power generation, heat exchangers,pollution control equipment,ornamental and others.
Typical applications
MANUFACTURING STANDARD
PRODUCT DESIGNATION
GRADE AISI
A/SA 249Boiler, Superheater, Heat-Exchanger, Condenser tube
304 / 304L / 304H316 / 316L / 316Ti317 / 317L309 / 309S310 / 310S347 / 347H321254SMO
A/SA 269 General service tube
A/SA 554 Mechanical tube
A/SA 688 Feedwater heater tube
A/SA 778 Unannealed general service tube
A/SA 312 General service pipe
Stainless steel welded pipe and tubingMain manufacturing standards
AU
STE
NIT
IC
STA
INLE
SS S
TEE
LS
MANUFACTURING STANDARD
PRODUCT DESIGNATION
GRADE AISI
B/SB 468 General service tube 20
B/SB 515 General service tube 800/800H
B/SB 676 General service tube AL6XN
B/SB 674 General service tube 25-6MO/904L
B/SB 464 General service pipe 20
B/SB 514 General service pipe 800/800H
B/SB 675 General service pipe AL6XN
B/SB 673 General service pipe 25-6MO/904L
Stainless steel welded pipe and tubingMain manufacturing standards
SUP
ER
AU
STE
NIT
IC
STA
INLE
SS S
TEE
ELS
MANUFACTURING STANDARD
PRODUCT DESIGNATION
GRADE AISI
A/SA 268 General service tube409 430 / 430Ti439 / 29-4C
A/SA 789 General service tube
2003 / 2101 / 2205 2304 / 2507
A/SA 790 General service pipe
Stainless steel welded pipe and tubingMain manufacturing standards
FE
RR
ITIC
STA
INLE
SS S
TEE
LSD
UP
LEX
ST
AIN
LESS
ST
EE
LS
MANUFACTURING STANDARD
PRODUCT DESIGNATION
GRADE AISI
B/SB 516 General service tube 600
B/SB 704 General service tube 625/825
B/SB 626 General service tube C276
B/SB 725 General service pipe 200/201
B/SB 517 General service pipe 600
B/SB 705 General service pipe 625/825
B/SB 619 General service pipe C276
Stainless steel welded pipe and tubingMain manufacturing standards
NIC
KE
L B
ASE
ST
AIN
LESS
STE
ELS
Round stainless steel welded process pipeROUND PIPE ASTM A312 / A778
Round stainless steel welded tubingROUND TUBING ASTM A249 / A269
Stainless steel ornamental and structural applicationsROUND TUBING ASTM A554
SQUARE TUBING ASTM A554
RECTANGULAR TUBING A554
Stainless steel welded pipe and tubing
Min. thickness (inch) 0.020
Max. thickness (inch) 0.120
Min. diameter (inch) 0.472
Max. diameter (inch) 2.375
Product range
Carbon steel welded tubing
• DIMENSIONS AND SHAPES DEVELOPED ACCORDING TO CUSTOMER SPECIFICATIONS
• SURFACE FINISH AND SPECIAL TOLERANCES UPON REQUEST
Carbon steel galvanized tubingfor structural applications and outdoor furniture
Agribusiness, playground equipment, animal confi nement, security turnstiles, scaffolding, greenhouses, frames, industrial shelving, intermediate bulk containers,benches and carports.
Typical applications
Quality and testing
Standard and optional testing• Micrographic analysis• Tensile test• Flattening test• Expansion test• Bending test• Non destructive eddy current weld test• Air under water test• Vacuum decay test• Dimensional test• Visual test• Surface roughness measurement• Salt spray test• Test for corrosive traces• Intergranular corrosion test• Grain size measurement
Optional processing• Heat treatments• Pickling• Outer surface polishing• Tubes individually sleeved• Bead rolling or weld seam removing• Cut to length• Customer defi ned marking• Customer defi ned tolerances• Special packaging