Post on 02-Jun-2018
8/10/2019 katalog leica disto d510.pdf
1/31
Leica DISTOTMX310The original laser distance meter
Leica DISTOTMD510The original laser distance meter
Leica DISTOTMD510The original laser distance meter
8/10/2019 katalog leica disto d510.pdf
2/31
Leica DISTOTMD510 792312 1
ENTable of Contents
Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - 2Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2Overview- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2Basic measuring screen - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3Selection screen- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - 4Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Clear- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Message Codes- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5Multifunctional endpiece- - - - - - - - - - - - - - - - - - - - - - - - - - - 5Permament / Minimum-Maximum measuring- - - - - - - - - - - - - 5Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - 6
Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7Overview- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7Tilt units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7Distance units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8Beep ON/OFF- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8Digital level ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8De-/Activate keypad lock- - - - - - - - - - - - - - - - - - - - - - - - - - 9Unlock keypad- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9Personalized favorites - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9Illumination - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9De-/Activate Bluetooth Smart - - - - - - - - - - - - - - - - - - - - - - 10
Calibration of tilt sensor (Tilt Calibration) - - - - - - - - - - - - - - 11Reset- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12Offset- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Functions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13Overview- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13Timer- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13Calculator- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13Adjusting measuring reference/tripod- - - - - - - - - - - - - - - - - 14
Memory- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14Measuring single distance- - - - - - - - - - - - - - - - - - - - - - - - - - 15Smart Horizontal Mode- - - - - - - - - - - - - - - - - - - - - - - - - - - 15Height-profile measurement - - - - - - - - - - - - - - - - - - - - - - - - 16Area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17Volume- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18Triangular area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
Long range mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19Inclination tracking- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20Sloped objects - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20Height tracking- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21Trapezium- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22Stake out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26
Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27Care- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
Warranty- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - 27Areas of responsibility- - - - - - - - - - - - - - - - - - - - - - - - - - - - 27Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
Disposal- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28Electromagnetic Compatibility (EMC) - - - - - - - - - - - - - - - - - 29Use of the product with Bluetooth- - - - - - - - - - - - - - - - - - 29Laser classification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29
8/10/2019 katalog leica disto d510.pdf
3/31
Leica DISTOTMD510 792312 2
ENInstrument Set-up
Introduction
The safety instructions and the user manual should be readthrough carefully before the product is used for the first time.
The person responsible for the product must ensure that allusers understand these directions and adhere to them.
The symbols used have the following meanings:
WARNINGIndicates a potentially hazardous situation or an unintended usewhich, if not avoided, will result in death or serious injury.
CAUTIONIndicates a potentially hazardous situation or an unintended usewhich, if not avoided, may result in minor injury and/or appreciablematerial, financial and environmental damage.
Important paragraphs which must be adhered to in practice asthey enable the product to be used in a technically correct and
efficient manner.
i
Overview
Display
On/Measure
Pointfinder
(Viewscreen)
Navigation
Clear / Off
Selection keyslinked to sym-bols above
Return /Equal
Functionscreen
Add /Subtract
8/10/2019 katalog leica disto d510.pdf
4/31
Leica DISTOTMD510 792312 3
ENInstrument Set-up
Basic measuring screen
Status bar
Favorites
Main line
Active function
Selection screen
Page indicator
Settings
Function /Settings
Helpfunction
8/10/2019 katalog leica disto d510.pdf
5/31
Leica DISTOTMD510 792312 4
ENInstrument Set-up
Pointfinder (Viewscreen)
1x
Zoom stage
Favorites
Illuminationadjustment
with navigationkeys left and
right
Active function
Zoom (1x, 2x, 4x)with navigationkeys up and down
Crosshair
Insert batteries
i
To ensure a reliableuse, do not use zinc-carbon batteries.We recommendusing high qualitybatteries.
Change batterieswhen battery symbolis flashing.
8/10/2019 katalog leica disto d510.pdf
6/31
Leica DISTOTMD510 792312 5
ENOperations
Switching ON/OFF Clear Message Codes
ON OFF
2 sec
Device is turnedOFF.
i
Press ON button2 sec to startcontinuous lasermode. If no key ispressed for 180sec, the device
switches off au-tomatically.
1x
Undo last action.
2x
Leave actual func-tion, go to defaultoperation mode.
If the info icon appears with anumber, observe the instructions insection "Message Codes".Example:
Multifunctional endpiece
i
The orientationof the endpieceis automaticallydetected andthe zero point isaccordingly ad-justed.
Permament / Minimum-Maximum measuring
1
2 sec
8.532mUsed to measure room diagonals (maximum val-ues) or horizontal distance (minimum values)
The minimum and maximum dis-tance measured is displayed (min,max.). The last value measured isdisplayed in the main line.
min. max.
2
Stops permanent / minimum-maximum measuring.
3
8/10/2019 katalog leica disto d510.pdf
7/31
Leica DISTOTMD510 792312 6
ENOperations
Add / Subtract
7.332m
1
The next meas-
urement isaddedto the previousone.
2
The next meas-
urement is sub-tractedfrom theprevious one.
2x
7.332m12.847 m
3
20.179 m
4 i
This process can be repeated asrequired. The same process canbe used for adding or subtractingareas or volumes.
Pointfinder (Viewscreen)
1x
1
1x
2x
4x
2
4x
2x
1x
1x
3
Exit pointfinder(viewscreen).
4
i
This is a great help for outdoor measuring. The integratedpointfinder (viewscreen) shows the target on the display.The device measures in the middle of the cross hair, even if
the laser dot is not visible.Parallax errors occur when the pointfinder camera is usedon close targets, with the effect that the laser appears dis-placed in the crosshair. In this case rely on the real laser dot.
8/10/2019 katalog leica disto d510.pdf
8/31Leica DISTOTMD510 792312 7
ENSettings
Overview
1 2
Tilt units
Distance units
Beep
Digital level
Keypad lock
Favorites
Illumination
Bluethooth
Tilt calibration
Reset
Offset
Tilt units
1 2
90.0
180.0
360.0
0.00 %
0.0 mm/m
0.00 in/ft
Switch between the
following units:
3 4
Confirm setting. Exit settings.
5
8/10/2019 katalog leica disto d510.pdf
9/31Leica DISTOTMD510 792312 8
ENSettings
Distance units
1 2
0.0000 m
0.000 m0.00 m
0 mm
0.00 ft
0'00" 1/320.00 in
0 in 1/32
0.000 yd
Switch between thefollowing units:3 4
Confirm setting. Exit settings.
5
Beep ON/OFF
1
ON
2
To switch ON,repeat procedure.
OFF
Exit settings.
3
Digital level ON/OFF
1
ON
2
To switch ON,repeat procedure.
OFF
Exit settings.
3 i
The digital levelis displayed inthe status line.
8/10/2019 katalog leica disto d510.pdf
10/31Leica DISTOTMD510 792312 9
ENSettings
De-/Activate keypad lock Unlock keypad
1
OFF
2To deactivate,repeat procedure.
ON
Exit settings.
3 1
within
2 sec
2
Personalized favorites
1 2 3
Select favoritefunction.
4
Press selectionkey left or right.Function is set asfavorite above thecorresponding se-lection key.
Exit settings.
5 i
Select your favorite functions forquick access.
Short cut:Press 2 sec on a selection-key inthe measuring mode.
Illumination
1
1/6
2
1/62/63/64/65/66/6
3
Select brightness.
4
Confirm setting. Exit settings.
5 i
To savepower re-duce bright-ness if notnecessary.
8/10/2019 katalog leica disto d510.pdf
11/31
Leica DISTOTMD510 792312 10
ENSettings
De-/Activate Bluetooth Smart
1
ON
2
To switch ON,repeat procedure.
OFF
Exit settings.
3 iDefault mode:
Bluetooth is switched on.Bluetooth icon in status line is dis-played if device is connected withBluetooth.
i
Switch on Bluetooth Smart in Settings.Connect the device with your smart phone, pad, laptop,A blue Bluetooth symbol appears on the laser distance meter if theconnection is established.Bluetooth switches off as soon as the laser distance meter is switched
off.The efficient and innovative Bluetooth Smart module (with the newBluetooth standard V4.0) works together with all Bluetooth SmartReady devices. All other Bluetooth devices do not support the energysaving Bluetooth Smart Module, which is integrated in the device.
We provide no warranty for free DISTOsoftware and offer no sup-port for it. We accept no liability whatsoever arising from the use ofthe free software and we are not obliged to provide corrections norto develop upgrades. A wide range of commercial software can befound on our homepage. Apps for Androidor Mac iOS can be found
in special internet shops.For more details, see our homepage.
8/10/2019 katalog leica disto d510.pdf
12/31
Leica DISTOTMD510 792312 11
ENSettings
Calibration of tilt sensor (Tilt Calibration)
1 2 3
Place device on absolutely flat surface.
180
4
1805
Turn the device horizontally by 180and place it again on absolutely flatsurface.
6 7
Place device on absolutely flat surface.
180
8 1809
Turn the device horizontally by 180and place it again on absolutely flatsurface.
10 i
After 2 secthe devicegoes back tothe basicmode.
8/10/2019 katalog leica disto d510.pdf
13/31
Leica DISTOTMD510 792312 12
ENSettings
Reset
1
Resetdevice?
2
Second confirmation with selectionkeys:
3 Refuse: Confirm:
Exit settings.
4 iReset returns the instrument tothe factory settings. All custom-ized settings and memories arelost.
Offset
1 2
1.012m
3
Select digit.1.012m
4
Adjust digit.
5
Approvevalue.
Exit settings.
6 iAn offset adds or subtracts aspecified value automatically to or
from all measurements. This func-tion allows tolerances to be takeninto account. The offset icon isdisplayed.
8/10/2019 katalog leica disto d510.pdf
14/31
Leica DISTOTMD510 792312 13
ENFunctions
Overview
Timer
Calculator
Adjusting measuring reference
MemorySingle Distance Measurement
Smart Horizontal Mode
Area
Volume
Triangle areaLong Range Mode
Height-profile Measurement
Inclination Tracking
Height Tracking
Trapezium
Stake outPythagoras 1
Measuring on sloped objects
Pythagoras 2
Timer
1 2
Off
30 sec5 sec2 sec
3
Select releasetime.
4
Confirm setting.
i
The self releasestarts ifON/Measurekey is pressed.
Calculator
1 2 3 Select key ondisplay.
Confirmevery key.
i
The measurement result from themain line is taken over to the cal-
culator and can be used for fur-ther calculations.Ft/in fractions are converted intoMeters.
8/10/2019 katalog leica disto d510.pdf
15/31
Leica DISTOTMD510 792312 14
ENFunctions
Adjusting measuring reference/tripod
1 2 3
Distance is measured from the rear of thedevice (standard setting).
Distance is measured from the front of thedevice (lock symbol = permanently).
Distance is measured from the tripodthread permanently.
4
Confirm setting.
iIf device is switched off, referencegoes back to standard setting(rear of the device).
Memory
1 212.208m
6.554m
23.889m
3
Switch betweenmeasurements.
4
Use Up/Downnavigation keys toshow more re-sults.
i
Short cut
8/10/2019 katalog leica disto d510.pdf
16/31
Leica DISTOTMD510 792312 15
ENFunctions
Measuring single distance
1 2
Aim active laser at target.
3
8.532m
4 i
Target surfaces:Measuring errors can occur whenmeasuring to colourless liquids,glass, styrofoam or semi-permea-ble surfaces or when aiming athigh gloss surfaces. Against darksurfaces the measuring time in-creases.
Smart Horizontal Mode
1 2
Aim laser at tar-get.
3
z
x
y
40.8
x
y
z
5.204m
0.032m
4.827m
4
(up to 360 and a transversetilt of 10)
8/10/2019 katalog leica disto d510.pdf
17/31
Leica DISTOTMD510 792312 16
ENFunctions
Height-profile measurement
1 2
REF
0
Aim at reference point (REF).
3 4
REF
1
0
2
3
4
5
h
d
Aim at additional points 1-x.
5
d
h
2.042m
0.054m
Horizontal distance todevice
Height difference toreference point (REF).
6
Exit function.
7 i
Ideal for measuring of height differences to areference point. Can be also used to meas-ure profiles and terrain sections. After meas-uring the reference point, the horizontaldistance and height is displayed for each fol-
lowing point.
8/10/2019 katalog leica disto d510.pdf
18/31
Leica DISTOTMD510 792312 17
ENFunctions
Area
1 2 3
Aim laser at firsttarget point.
4 5
Aim laser at sec-ond target point.
20.276m
3.9I0m
6.228m
24.352m2
First distance
Second distance
Circumference
Area
6 i
The result is shown in the main line and themeasured value above.Partial Measurements / Painter function:Press + or - after starting the first measure-ment. Measure and add or subtract distanc-
es. Finish with DIST. Measure 2nd length.
i
8/10/2019 katalog leica disto d510.pdf
19/31
Leica DISTOTMD510 792312 18
ENFunctions
Volume
1 2 3
Aim laser at firsttarget point.
4 5
Aim laser at sec-ond target point.
6 7
Aim laser at thirdtarget point.
24.224m2
208.703m2
80.208m
78.694m3
Circumference
Wall areas
Ceiling/floor area
Volume
8 9
Use Up/Downnavigation keys toshow more re-sults.
ENF i
8/10/2019 katalog leica disto d510.pdf
20/31
Leica DISTOTMD510 792312 19
ENFunctions
Triangular area
1 2 3
Aim laser at firsttarget point.
4 5
Aim laser at sec-ond target point.
6 7
Aim laser at thirdtarget point.
89.90
23.563m
23.813m2
Circumference
Angle between first and second
measurementTriangular area
8 9
Use Up/Downnavigation keys toshow more re-sults.
Long range mode
1 2 i
The long range mode allows measur-ing of difficult targets in unfavorableconditions e.g. bright ambient light or
bad target reflectivity. The measuringtime is increased.An icon in the status line shows if thefunction is active.
ENF ti
8/10/2019 katalog leica disto d510.pdf
21/31
Leica DISTOTMD510 792312 20
ENFunctions
Inclination tracking
1 2 89.3
90
0
3 iInclination is permanently displayed.Instrument beeps at 0 and 90. Idealfor horizontal or vertical adjustments.
Sloped objects
1 2 3
Aim laser at upper targetpoint.
4 5
Aim laser at lower targetpoint.
30.55
3.506m
5.944m
6.901m
Horizontal distance between both points
Vertical height between both points
Included angle between both points
Distance between both points
6 7
Use Up/Downnavigation keys toshow more re-sults.
i
Indirect distance measuring be-tween 2 points with additional re-sults. Ideal for applications such as
length and slope of roof, height ofchimneys,It is important, that the instru-ment is positioned in the samevertical plane as the 2 measuredpoints. The plane is defined of theline between the 2 points.
ENF ti
8/10/2019 katalog leica disto d510.pdf
22/31
Leica DISTOTMD510 792312 21
ENFunctions
Height tracking
1 2
P0
Px
Aim laser at low-er point.
3 4
P0
Px
Aim laser at upper points and angle/height tracking starts automatically.
5
x
y
x y6.932 m
9.827m
P0
Px
6
= Tracking height if device isturned on tripod
7
Stops height tracking and displayslast measurement.
8
Use Up/Downnavigation keys toshow more re-sults.
i
Heights of buildings or trees withoutsuitable reflective points can be deter-mined. At the bottom point, distanceand tilt is measured - which needs a re-flective laser target. The upper point
can be targeted with the pointfinder /crosshair and does not need a reflec-tive laser target as only the inclination ismeasured.
ENF ti
8/10/2019 katalog leica disto d510.pdf
23/31
Leica DISTOTMD510 792312 22
ENFunctions
Trapezium
1 2 3
Aim laser at upperpoint.
4 5
Aim laser at 2ndpoint.
x
x
22.70
5.907m
78.257m2
6
Trapezium area
7
Use Up/Downnavigation keys toshow more re-sults.
ENF ti
8/10/2019 katalog leica disto d510.pdf
24/31
Leica DISTOTMD510 792312 23
ENFunctions
Stake out
i
Two differentdistances (aand b) can beentered tomark off de-fined measured
lengths.
1
2
3
ab
b
a =b
1
2
3
ab
b
a =b
1 2
1.012m
3
Select digit.1.012 m
4
Adjust digit.
5
Approvevalue "a".
0.625 m
6
Adjustvalue "b".
7
Approve value "b"and start meas-urement.
8
Move deviceslowly along thestake-out line.The distance tothe next stake out
point is displayed.
0.240m
0.625m
0.240 m ismissing up tonext 0.625 mdistance.
i
When approaching a stakeout point to less than 0.1 mthe instrument starts to beep.The function can be stoppedby pressing the CLEAR/OFF
button.
ENFunctions
8/10/2019 katalog leica disto d510.pdf
25/31
Leica DISTOTMD510 792312 24
ENFunctions
Pythagoras (2-point)
1 2 3
Aim laser at firsttarget.
4 5
Aim laser at secondtarget.
8.294m
6 7
Use Up/Downnavigation keys toshow more re-sults.
i
The result is shown in the main line.Pressing the measuring key for 2 sec in the function ac-tivates automatically Minimum or Maximum measure-ment.
We recommend to use the pythagoras only for indirecthorizontal measuring.For height measuring (vertical) it is more precise to usea function with the incliantion measuring.
ENFunctions
8/10/2019 katalog leica disto d510.pdf
26/31
Leica DISTOTMD510 792312 25
ENFunctions
Pythagoras (3-point)
1 2 3
Aim laser at firsttarget.
4 5
Aim laser at sec-ond target.
6 7
Aim laser atthird target.
18.294m
8 9
Use Up/Downnavigation keys toshow more re-sults.
i
The result is shown in the main line.Pressing the measuring key for 2 sec in the functionactivates automatically Minimum or Maximum meas-urement.
We recommend to use the pythagoras only for indi-rect horizontal measuring.For height measuring (vertical) it is more precise touse a function with inclination measurement.
ENTechnical Data
8/10/2019 katalog leica disto d510.pdf
27/31
Leica DISTOTMD510 792312 26
ENTechnical Data
* applies for 100 % target reflectivity (white painted wall),low background illumination, 25 C
** applies for 10 to 100 % target reflectivity, high backgroundillumination, - 10 C to + 50 C
*** Tolerances apply from 0.05 m to 10 m with a confidencelevel of 95%. The maximum tolerance may deteriorate to0.1 mm/m between 10 m to 30 m, to 0.20 mm/m between30 m to 100 m and to 0.30 mm/m for distances above 100 m
**** applies for 100 % target reflectivity, background illumi-
nation of approximately 30'000 lux***** after user calibration. Additional angle related devia-tion of +/- 0.01 per degree up to +/-45 in each quadrant.Applies at room temperature. For the whole operatingtemperature range the maximum deviation increases by+/-0.1.
For accurate indirect results, the use ofa tripod is recommended. For accurate
tilt measurements a transverse tilt should beavoided.
Distance measurement
Typical Measuring Tolerance* 1.0 mm / ~1/16" ***
Maximum MeasuringTolerance**
2.0 mm / 0.08 in ***
Typical Range* 200 m / 660 ft
Range at unfavourablecondition ****
80 m / 260 ft
Smallest unit displayed 0.1 mm / 1/32 in
Power Range Technology yes
laser pointat distances
6 /30 / 60 mm(10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laserbeam*****
0.2
Measuring tolerance tohousing*****
0.2
Range 360
General
Laser class 2
Laser type 635 nm, < 1 mW
Protection class IP65 (dust tight and jetwater protected)
Autom. laser switch off after 90 s
Autom. power switch-off after 180 s
Bluethooth Smart Bluethooth v4.0
Battery durability (2 x AA) up to 5000 measure-ments
Dimension (H x D x W) 143 x 58 x 29 mm5.6 x 2.28 x 1.14 in
Weight (with batteries) 198 g / 6.37 oz
Temperature range:- Storage
- Operation
-25 to 70 C-13 to 158 F-10 to 50 C14 to 122 F
i
Functions
Distance measuring yes
Min/Max measuring yes
Permanent measuring yes
Stake-out yes
Addition/Subtraction yes
Area yes
Triangle area yesVolume yes
Trapezium yes
Painter function (area withpartial measurem.)
yes
Pythagoras 2-point, 3-point
Smart Horizontal Mode /Indirect height
yes
Height-profile measurement yes
Inclination tracking yes
Sloped objects yes
Height tracking yes
Memory 30 displays
Beep yes
Illuminated colour display yes
Multifunctional endpiece yes
Pointfinder (Viewscreen) 4xZoom
Digital Level yes
Bluetooth Smart yes
Personalized Favorites yes
Timer yes
Long Range Mode yes
Calculator yes
ENMessage Codes Care Safety Instructions
8/10/2019 katalog leica disto d510.pdf
28/31
Leica DISTOTMD510 792312 27
ENMessage Codes
If the message Errordoes not disappearafter switching on the device repeatedly,contact the dealer.
If the message InFoappears with a number,press the Clear button and observe thefollowing instructions:
Care
Clean the device with a damp, soft cloth.
Never immerse the device in water.
Never use aggressive cleaning agents orsolvents.
Warranty
Lifetime Manufacturer's Warranty
Warranty coverage for the entire usage timeof the product according to Leica Geosys-tems International Limited Warranty. Free ofcharge repair or replacement for all productsthat suffer defects as a result of faults in mate-rials or manufacturing, for the entire life ofthe product.
3 Years no Cost
Guaranteed service should the product
become defective and require servicingunder normal conditions of use, as describedin the user manual, at no additional charge.
To receive the "3 years no cost" period, theproduct must be registered at www.leica-geosystems.com/registration within 8 weeksof the purchase date. If the product is notregistered, a "2 years no cost" period applies.
Safety Instructions
The person responsible for the instrumentmust ensure that all users understand thesedirections and adhere to them.
Areas of responsibility
Responsibilities of the manufacturerof the original equipment:
Leica Geosystems AGHeinrich-Wild-Strasse
CH-9435 Heerbrugg
Internet: www.disto.com
The company above is responsible forsupplying the product, including the UserManual in a completely safe condition.
The company above is not responsible forthird party accessories.
Responsibilities of the person incharge of the instrument:
To understand the safety instructions onthe product and the instructions in theUser Manual.
To be familiar with local safety regulationsrelating to accident prevention.
Always prevent access to the product byunauthorised personnel.
No. Cause Correction
156 Transverse tilt greaterthan 10
Hold the instrumentwithout any transverse tilt.
162 Calibration mistake Make sure, the device isplaced on a absolutelyhorizontal and flat surface.Repeat the calibrationprocedure. If the mistakestill occurs, contact yourdealer.
204 Calculation error Perform measurementagain.
240 Data transfer error Repeat procedure.252 Temperature too high Let device cool down.
253 Temperature too low Warm device up.
255 Received signal tooweak, measuring timetoo long
Change target surface(e.g. white paper).
256 Received signal toohigh
Change target surface(e.g. white paper).
257 Too much back-ground light
Shadow target area.
258 Measurement outside
of measuring range
Correct range.
260 Laser beam inter-rupted
Repeat measurement.
ENSafety Instructions
8/10/2019 katalog leica disto d510.pdf
29/31
Leica DISTOTMD510 792312 28
ENSafety Instructions
Permitted use
Measuring distances
Tilt measurement
Data transfer with Bluetooth
Prohibited use Using the product without instruction
Using outside the stated limits
Deactivation of safety systems andremoval of explanatory and hazard labels
Opening of the equipment by using tools(screwdrivers, etc.)
Carrying out modification or conversion ofthe product
Use of accessories from other manufac-turers without express approval
Deliberate dazzling of third parties; also inthe dark
Inadequate safeguards at the surveying site(e.g. when measuring on roads, construc-tion sites, etc.)
Deliberate or irresponsible behaviour onscaffolding, when using ladders, whenmeasuring near machines which arerunning or near parts of machines or instal-
lations which are unprotected Aiming directly in the sun
Hazards in use
WARNINGWatch out for erroneous measurements ifthe instrument is defective or if it has beendropped or has been misused or modified.Carry out periodic test measurements.
Particularly after the instrument has beensubject to abnormal use, and before, duringand after important measurements.
CAUTIONNever attempt to repair the product your-self. In case of damage, contact a local dealer.
WARNINGChanges or modifications not expresslyapproved could void the users authority tooperate the equipment.
Limits of use
Refer to section "Technical data".
The device is designed for use in areaspermanently habitable by humans. Do notuse the product in explosion hazardous areasor in aggressive environments.
Disposal
CAUTIONFlat batteries must not be disposed of withhousehold waste. Care for the environmentand take them to the collection pointsprovided in accordance with national or local
regulations.The product must not be disposed withhousehold waste.
Dispose of the product appropriatelyin accordance with the national regu-lations in force in your country.
Adhere to the national and country specificregulations.
Product specific treatment and waste
management can be downloaded from ourhomepage.
i
ENSafety Instructions
8/10/2019 katalog leica disto d510.pdf
30/31
Leica DISTOTMD510 792312 29
ENSafety Instructions
Electromagnetic Compatibility(EMC)
WARNINGThe device conforms to the most stringentrequirements of the relevant standards andregulations.
Yet, the possibility of causing interference inother devices cannot be totally excluded.
Use of the product with Blue-tooth
WARNINGElectromagnetic radiation can cause distur-bances in other equipment, in installations(e.g. medical ones such as pacemakers or
hearing aids) and in aircraft. It can also affecthumans and animals.Precautions:
Athough this product conforms to the moststringent standards and regulations, thepossibility of harm to people and animalscannot totally excluded.
Do not use the product near petrolstations, chemical plants, in areas with apotentially explosive atmosphere andwhere blasting takes place.
Do not use the product near medicalequipment.
Do not use the product in airplanes.
Do not use the product near your body forextended periods.
Laser classification
The device produces visible laser beams,which are emitted from the instrument:
It is a Class 2 laser product in accordancewith:
IEC60825-1 : 2007 Radiation safety oflaser products
Laser Class 2 products:
Do not stare into the laser beam or direct it
towards other people unnecessarily. Eyeprotection is normally afforded by aversionresponses including the blink reflex.
WARNINGLooking directly into the beam with opticalaids (e.g. binoculars, telescopes) can behazardous.
CAUTION
Looking into the laser beam may behazardous to the eyes.
Labelling
Subject to change (drawings, descriptionsand technical data) without prior notice.
Laser RadiationDo not stare into the beam
Laser class 2acc. IEC 60825-1:2007
Maximum radiant power:
8/10/2019 katalog leica disto d510.pdf
31/31