Post on 02-Mar-2021
Meusburger Georg GmbH & Co KG | Kesselstr. 42 | 6960 Wolfurt | Austria
T +43 5574 6706-0 | F -11 | verkauf@meusburger.com | www.meusburger.com
HWS 650 und HWS 600 mechanische Hochdruckspanner
HWS 650 and HWS 600 high-pressure mechanical vices
» Kompakte und stabile Grundkörper aus GGG-70 mit gleichbleibender Gesamtlänge
» Geringer Reinigungsaufwand durch vollständig geschlossene Spindel und zusätzliches Seitenfenster
» Wiederholgenauigkeit von 0,01 mm beim Spannen
» HWS 600 ist zusätzlich allseitig auf 0,02 mm parallel geschliffen und dadurch besonders geeignet für horizontale und vertikale Bearbeitungen
» Compact, stable bodies from GGG-70 which maintain their length
» Easy to clean through fully enclosed spindle and additional side window
» Accuracy of 0.01 mm in clamping repeatability
» On the HWS 600 all surfaces are ground with a parallelism of 0.02 mm, it is therefore ideal for horizontal and vertical machining
ll1
l2
h1h2
hb2b1
b3b1b2
l1 l2
b1
d
b
133167
HWS 500/125HWS 500/160
Spannfeld 1Clamping field 1
SF)* Spannfeld Clamping field
Spannfeld 2Clamping field 1
2 db2020
1b80
110
2l135185
1l1717
b3
1818
0-1050-155
100-205150-305
HWS 500/125HWS 500/160
SF)* 1 SF)* 2
b1 b2 h h1 h2 l l1 l2 SK)* [kN] b197 155 107.5 65 42.5 480-690 425 45 40 125252 200 130.5 80 50.5 570-875 570 85 50 160
Hochdruck-Maschinen-schraubstock, mechanisch
High-pressure machine vice, mechanical
HWS 500
» 100% Ausnutzung der Spannkraft durch zentral positionierte Spindel mit mechanischem Hochdruck-verstärker
» Hohe Stabilität durch Monoblock-Grundkörper aus GGG-70 Sphäroguss
» Höchste Präzision durch gehärtete und geschliffene Führungsbahnen
» Wiederholgenauigkeit beim Spannen 0,01mm
» 100% of clamping force transmitted through spindle right in the centre and high-pressure mechanical intensifi er
» High stability through monoblock body from GGG-70 ductile cast iron
» Highest precision through hardened and ground slides
» Accuracy of 0.01 mm in clamping repeatability
- Lieferung inklusive 1 Satz Spannbacken HWS 5602 und 1 Handkurbel HWS 5670 - Supplied with 1 set of HWS 5602 clamping jaws and 1 HWS 5670 handle
SK)* Spannkraft Clamping force
SpannmöglichkeitenClamping possibilities
Befestigung durch SchraubenbohrungMounting with screw hole
Nr. /No.HWS 500/125HWS 500/160
2
b2
b b1h
l
b b1 b2 h l270 155.2 18 28 264325 200 18 32 325
Drehplatte für HWS 500
Rotary base for HWS 500HWS 5001
» Passend zu HWS 500
» Suitable for HWS 500
Nr. /No.HWS 5001/125HWS 5001/160
3
l5
l4l3
l1
l2l
h2
h3
l6
h1h
b1 b
Spannfeld 1Clamping field 1
Spannfeld 2Clamping field 2
Spannfeld 3Clamping field 3
Spannfeld 5Clamping field 5
Spannfeld 4Clamping field 4
0-2000-310
HWS 600/125HWS 600/160
192-261233-402
80-285106-416
155-355174-484
122-191165-334
SF)* 1 SF)* 2 SF)* 3 SF)* 4 SF)* 52424
HWS 600/125HWS 600/160
195300
l2125140
l11 db b2
2020
b3
5468
1313
d
b3
l2l1b1
b1
b2
b2
SF)* Spannfeld Clamping field
b1 h h1 h2 h3 l l1 l2 l3 l4 l5 l6 SK)* [kN] b126 140 50 40 100 524 410 190 21 90 100 124 40 125161 160 60 50 110 679 570 230 21 115 115 127 50 160
Hochdruckspanner, mechanisch, allseitig geschliffen
High-pressure mechanical vice, all surfaces ground
HWS 600
» Allseitig auf 0,02mm parallel geschliffen, somit beson-ders geeignet für horizontale und vertikale Bearbei-tung
» Kompakter und stabiler Monoblock-Grundkörper aus GGG-70 mit gleichbleibender Gesamtlänge
» Geringer Reinigungsaufwand durch vollständig geschlossene Spindel und zusätzliches Seitenfenster
» Wiederholgenauigkeit beim Spannen 0,01mm
» All surfaces ground with a parallelism of 0.02 mm, therefore ideal for horizontal and vertical machining
» Compact, stable monoblock body from GGG-70 which maintains its length
» Easy to clean through fully enclosed spindle and additional side window
» Accuracy of 0.01 mm in clamping repeatability
- Lieferung inklusive 1 Satz Spannbacken HWS 5602, 2 Sätze Spannpratzen HWS 5660 (4 Stk.) und 1 Handkurbel HWS 5670 - Supplied with 1 set of HWS 5602 clamping jaws, 2 sets of HWS 5660 clamps (4 pcs.) and 1 HWS 5670 handle
Spannmöglichkeiten:Soll nach außen gespannt werden, braucht die Spindel nur hinten an der feststehenden Backe angebracht und mit vier Schrauben befestigt zu werden. Mutter und bewegliche Backe müssen um-gedreht werden.
Clamping options:For reverse clamping just place the spindle at the rear part of the fi xed jaw and clamp by four screws. Then rotate the spindle shoe and the moveable jaw.
SK)* Spannkraft Clamping force
SpannmöglichkeitenClamping possibilities
Befestigung durch SchraubenbohrungMounting with screw hole
Nr. /No.HWS 600/125HWS 600/160
4
l3l2
l1
l
h3
h1h2
hb1 b
Spannfeld 2Clamping field 2
Spannfeld 1Clamping field 1
HWS 650/125HWS 650/160
0-2540-310
80-334120-430
SF)* 1 SF)* 22020
HWS 650/125HWS 650/160
195300
l2125140
l11 db b2
5468
1313
d
b2b1
l2l1
b1
SF)* Spannfeld Clamping field
b1 h h1 h2 h3 l l1 l2 l3 SK)* [kN] b126 140 100 22 40 524 410 190 115 40 125161 165 115 30 50 639 530 230 123 50 160
Hochdruckspanner, mechanisch
High-pressure mechanical vice
HWS 650
» Kompakter und stabiler Grundkörper aus GGG-70 mit gleichbleibender Gesamtlänge
» Geringer Reinigungsaufwand durch vollständig ge-schlossene Spindel und zusätzlichem Seitenfenster
» Wiederholgenauigkeit beim Spannen 0,01mm
» Compact, stable body from GGG-70 which maintains its length
» Easy to clean through fully enclosed spindle and additional side window
» Accuracy of 0.01 mm in clamping repeatability
- Lieferung inklusive 1 Satz Spannbacken HWS 6502, 2 Sätze Spannpratzen HWS 5660 (4 Stk.) und 1 Handkurbel HWS 5670 - Supplied with 1 set of HWS 6502 clamping jaws, 2 sets of HWS 5660 clamps (4 pcs.) and 1 HWS 5670 handle.
SK)* Spannkraft Clamping force
SpannmöglichkeitenClamping possibilities
Befestigung durch SchraubenbohrungMounting with screw hole
Nr. /No.HWS 650/125HWS 650/160
5
Mat.: 1.2510 gehärtet/hardened
h1
b
b1
t
h2
Mat.: 1.2510 gehärtet/hardened
h1
b t
b1
h2
Mat.: 1.0503
h
l
b
b1 h1 h2 t b 80 39,5 15 12 125100 49,5 20 16 160
h l b48 98 12565 146 160
b1 h1 h2 t b 80 39,5 15 12 125100 49,5 20 16 160
h
h1
l
l1
b
Mat.: 1.2510 gehärtet/hardened
h h1 l l1 b40 22 70 30 12550 30 100 40 160
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
Spannbacke, glatt
Weiche Backen für HWS 650
Spannbacke, geriffelt
Clamping jaw, plain
Soft jaws for HWS 650
Clamping jaw, serrated
HWS 5602
HWS 6504
HWS 5604
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 Spannbacke inklusive Schrauben- 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 feste Backe und 1 bewegliche Backe inklusive Schrauben- 1 fi xed jaw and 1 moveable jaw plus screws are included in the delivery
Harte Backen für HWS 650
Hard jaws for HWS 650
HWS 6502
- Lieferung - 1 feste Backe und 1 bewegliche Backe inklusive Schrauben- 1 fi xed jaw and 1 moveable jaw plus screws are included in the delivery.
Nr. /No.HWS 5602/125HWS 5602/160
Nr. /No.HWS 6504/125HWS 6504/160
Nr. /No.HWS 5604/125HWS 5604/160
Nr. /No.HWS 6502/125HWS 6502/160
Mat.: 1.2510 gehärtet/hardened
t
b h
b1
Mat.: 1.2510 gehärtet/hardened
t
b hh2
b1
50 40 30 20 10 0 10 20 30 40 50
h1
t1
ll1
bb1h
l
SW
h
b1 h l l1 Stk. / pcs. b17 30 70 35 2 40
b1 t h b 80 24 17 125100 24 17 160
b1 h h1 h2 t t1 b 80 16.8 5.8 2.5 40 3.9 125100 16.8 5.8 2.5 40 3.9 160
SW h l12 146 160
Verpackungseinheit: 1 Stk. = 2 SpannpratzenPacking unit: 1 pce. = 2 clamping shoes
Spannpratzen
Aufsatzbacke glatt für HWS 600 Aufsatzbacke glatt/ geriffelt für HWS 600
Handkurbel
Clamping shoes
Top jaw, plain, for HWS 600 Top jaw, plain / serrated, for HWS 600
Handle
HWS 5660
HWS 6002 HWS 6004
HWS 5670
» passend zu HWS 600 und HWS 650
» Passend für HWS 600 » Passend für HWS 600
» passend zu HWS 500, HWS 600 und HWS 650
» Suitable for HWS 600 and HWS 650
» Suitable for HWS 600 » Suitable for HWS 600
» Suitable for HWS 500, HWS 600 and HWS 650
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 Spannbacke inklusive Schrauben- 1 clamping jaw plus screws included in the delivery
Nr. /No.HWS 5660/ 2/ 40
Nr. /No.HWS 6002/125HWS 6002/160
Nr. /No.HWS 6004/125HWS 6004/160
Nr. /No.HWS 5670/160
6
Mat.: 1.2510 gehärtet/hardened
h1
b tt1
h3
b1
h2
Mat.: 1.2510
l min.
M
l max
.
Mat.: 1.2510 gehärtet/hardened
h1
b tt1
h3
b1h2
Mat.: 1.2510
h1
b t
b1
h2
b1 h1 h2 h3 t t1 b 80 39.5 15 2,5 16 3.9 125100 49.5 20 2,5 18 3.9 160
b1 h1 h2 h3 t t1 b 80 39,5 15 8 12 5 125100 49,5 20 8 16 5 160
b1 h1 h2 t b 80 39,5 15 30 125100 49,5 20 40 160
l min. l max. M20 155 M1220 155 M16
» Individuell anpassbarer Werkstückanschlag für überstehende Werkstücke
» Individually adjustable stop for clamping protruding work pieces
Krallenbacke
Absatzbacke Spannbacke, weich
Werkstückanschlag
Stepped jaw with claws
Stepped jaw Soft jaw
Adjustable stop
HWS 5610
HWS 5606 HWS 5608
HWS 5650
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
- HWS 5650/12 passend zu HWS 650/125 HWS 5650/16 passend zu HWS 500, HWS 600 und HWS 650/160 - HWS 5650/12 compatible with HWS 650/125 HWS 5650/16 compatible with HWS 500, HWS 600 and HWS 650/160
- Lieferung - 1 Spannbacke inklusive Schrauben- 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
Nr. /No.HWS 5610/125HWS 5610/160
Nr. /No.HWS 5606/125HWS 5606/160
Nr. /No.HWS 5608/125HWS 5608/160
Nr. /No.HWS 5650/12HWS 5650/16
Mat.: 1.2510 gehärtet/hardened
h1
b
b1
t
h2
Mat.: 1.2510 gehärtet/hardenedh1
b t
b1
h2
Mat.: 1.0503
h
l
b
b1 h1 h2 t b 80 39,5 15 12 125100 49,5 20 16 160
h l b48 98 12565 146 160
b1 h1 h2 t b 80 39,5 15 12 125100 49,5 20 16 160
h
h 1
l
l1
b
Mat.: 1.2510 gehärtet/hardened
h h1 l l1 b40 22 70 30 12550 30 100 40 160
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
Spannbacke, glatt
Weiche Backen für HWS 650
Spannbacke, geriffelt
Clamping jaw, plain
Soft jaws for HWS 650
Clamping jaw, serrated
HWS 5602
HWS 6504
HWS 5604
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 Spannbacke inklusive Schrauben- 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 feste Backe und 1 bewegliche Backe inklusive Schrauben- 1 fi xed jaw and 1 moveable jaw plus screws are included in the delivery
Harte Backen für HWS 650
Hard jaws for HWS 650
HWS 6502
- Lieferung - 1 feste Backe und 1 bewegliche Backe inklusive Schrauben- 1 fi xed jaw and 1 moveable jaw plus screws are included in the delivery.
Nr. /No.HWS 5602/125HWS 5602/160
Nr. /No.HWS 6504/125HWS 6504/160
Nr. /No.HWS 5604/125HWS 5604/160
Nr. /No.HWS 6502/125HWS 6502/160
7
Mat.: 1.2510 gehärtet/hardened
t
b h
b1
Mat.: 1.2510 gehärtet/hardened
t
b hh2
b1
50 40 30 20 10 0 10 20 30 40 50
h1
t1
ll1
bb1h
l
SW
h
b1 h l l1 Stk. / pcs. b17 30 70 35 2 40
b1 t h b 80 24 17 125100 24 17 160
b1 h h1 h2 t t1 b 80 16.8 5.8 2.5 40 3.9 125100 16.8 5.8 2.5 40 3.9 160
SW h l12 146 160
Verpackungseinheit: 1 Stk. = 2 SpannpratzenPacking unit: 1 pce. = 2 clamping shoes
Spannpratzen
Aufsatzbacke glatt für HWS 600 Aufsatzbacke glatt/ geriffelt für HWS 600
Handkurbel
Clamping shoes
Top jaw, plain, for HWS 600 Top jaw, plain / serrated, for HWS 600
Handle
HWS 5660
HWS 6002 HWS 6004
HWS 5670
» passend zu HWS 600 und HWS 650
» Passend für HWS 600 » Passend für HWS 600
» passend zu HWS 500, HWS 600 und HWS 650
» Suitable for HWS 600 and HWS 650
» Suitable for HWS 600 » Suitable for HWS 600
» Suitable for HWS 500, HWS 600 and HWS 650
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 Spannbacke inklusive Schrauben- 1 clamping jaw plus screws included in the delivery
Nr. /No.HWS 5660/ 2/ 40
Nr. /No.HWS 6002/125HWS 6002/160
Nr. /No.HWS 6004/125HWS 6004/160
Nr. /No.HWS 5670/160
Mat.: 1.2510 gehärtet/hardened
h1
b
b1
t
h2
Mat.: 1.2510 gehärtet/hardened
h1
b t
b1
h2
Mat.: 1.0503
h
l
b
b1 h1 h2 t b 80 39,5 15 12 125100 49,5 20 16 160
h l b48 98 12565 146 160
b1 h1 h2 t b 80 39,5 15 12 125100 49,5 20 16 160
h
h 1
l
l1
bMat.: 1.2510 gehärtet/hardened
h h1 l l1 b40 22 70 30 12550 30 100 40 160
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
Spannbacke, glatt
Weiche Backen für HWS 650
Spannbacke, geriffelt
Clamping jaw, plain
Soft jaws for HWS 650
Clamping jaw, serrated
HWS 5602
HWS 6504
HWS 5604
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 Spannbacke inklusive Schrauben- 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 feste Backe und 1 bewegliche Backe inklusive Schrauben- 1 fi xed jaw and 1 moveable jaw plus screws are included in the delivery
Harte Backen für HWS 650
Hard jaws for HWS 650
HWS 6502
- Lieferung - 1 feste Backe und 1 bewegliche Backe inklusive Schrauben- 1 fi xed jaw and 1 moveable jaw plus screws are included in the delivery.
Nr. /No.HWS 5602/125HWS 5602/160
Nr. /No.HWS 6504/125HWS 6504/160
Nr. /No.HWS 5604/125HWS 5604/160
Nr. /No.HWS 6502/125HWS 6502/160
Mat.: 1.2510 gehärtet/hardened
h1
b tt1
h3
b1h2
Mat.: 1.2510
l min.
M
l max
.
Mat.: 1.2510 gehärtet/hardened
h1
b tt1
h3
b1
h2
Mat.: 1.2510
h1
b t
b1
h2
b1 h1 h2 h3 t t1 b 80 39.5 15 2,5 16 3.9 125100 49.5 20 2,5 18 3.9 160
b1 h1 h2 h3 t t1 b 80 39,5 15 8 12 5 125100 49,5 20 8 16 5 160
b1 h1 h2 t b 80 39,5 15 30 125100 49,5 20 40 160
l min. l max. M20 155 M1220 155 M16
» Individuell anpassbarer Werkstückanschlag für überstehende Werkstücke
» Individually adjustable stop for clamping protruding work pieces
Krallenbacke
Absatzbacke Spannbacke, weich
Werkstückanschlag
Stepped jaw with claws
Stepped jaw Soft jaw
Adjustable stop
HWS 5610
HWS 5606 HWS 5608
HWS 5650
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
- HWS 5650/12 passend zu HWS 650/125 HWS 5650/16 passend zu HWS 500, HWS 600 und HWS 650/160 - HWS 5650/12 compatible with HWS 650/125 HWS 5650/16 compatible with HWS 500, HWS 600 and HWS 650/160
- Lieferung - 1 Spannbacke inklusive Schrauben- 1 clamping jaw plus screws included in the delivery
- Lieferung - 1 Spannbacke inklusive Schrauben - 1 clamping jaw plus screws included in the delivery
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Passend zu HWS 500, HWS 600, HWS 650 und HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
» Suitable for HWS 500, HWS 600, HWS 650 and HWS 6502
Nr. /No.HWS 5610/125HWS 5610/160
Nr. /No.HWS 5606/125HWS 5606/160
Nr. /No.HWS 5608/125HWS 5608/160
Nr. /No.HWS 5650/12HWS 5650/16
8