1

Self Loading

Exclusive Philippine DistributorQuality Concrete Construction

Products Phils. Inc.

DIECI

Made in Italy

Dieci Self-loading Truck Mixer 4 Models

4

Specifications L3500 L 4700 F 7000Drum Capacity 3.5 m³ 4.7 m³ 7.0 m³

Concrete Yield 2.5 m³ 3.5 m³ 5.0 m³

Loading Shovel Capacity 0.500 m³ 0.600 m³ 0.600 m³

Water Tank Capacity 700 L 700 L 820 L

Max. Speed 27 kph 27 kph 27 kph

Loading System Self-Loading Self-Loading Self-Loading

Unloading 3 side unloading 3 side unloading Rear Unloading

Dry Weight 6.15 Tons 6.70 Tons 7.40 Tons

Ground Clearance, mm 385 mm 385 mm 420 mm

L x W x H, mm 5060 x 2400 x 3470 5470 x 2400 x 3850 6475 x 2330 x 3990

Engine/Power Iveco NEF- NA/80hp Iveco NEF-TC/ 102hp Iveco NEF -TA/128hp

Engine Displacement 4.5 cm³ 4.5 cm³ 4.5 cm³

Intake Turbo Compressor Turbo Compressor After Cooler Turbo Compressor

Diesel Tank Capacity 90 L / 20 Gal 90 L / 20 Gal 90 L / 20 Gal

OPTIONAL PARTS: Air Conditioning Unit, Power Spray,

Specifications

ISOLATED JOB SITE

NUMBER OF TRIPS 6 X CYCLE

RAW MATS ON SITE

CONDITIONS WHEN DISCHARGING CRITICAL SET UP FACTORS

TO ACHIEVE MAXIMUM CYCLE

SET UP PUMPS

AND DISCHARGE

CEMENT

MOBILE OR TRAILER PUMP CRETE MANPOWER UNLOADING CAPABILITIES

DIECI SELF LOADING MIXERS

27KM/H = 3.3 KMS = ONLY 7.5 MINS TRAVEL TO DISCHARGE LOACATION

DIECI SELF-LOADING MIXER OPERATION

25 MINS LOAD RAW MATS INTO DRUM

25 MINS MIXING

45 MINS SET UP PUMP

CYCLE TIME

45 MINS DISCHARGING 7.5 MINS TO GO BACK

Rated Capacity 5 cu.m. 2.5 Hrs x 6 Cycles /15Hrs• Loading time: 25 mins Max• Mixing Time: 25 mins• Travel Time: 27km / hour ( loaded) say 7.5 Minutes for distance of 3.3kms • Pump set up time: 45 mins/ set up concrete pump x number of locations• Discharging cement into project site: 45 mins to discharge 5cu.m.• Waiting Time/Rest Time Cycle: 15 mins• Complete Cycle/ 15 hrs: Six ( 6 ) Complete trips of loading and discharging l 1x

5cum F-7000 Model= 6 Cycles ; 1x3.5cu.m. L-4700 Model = 5 CyclesNote: Operating Cycle varies on Team effort and Operator Skills

Advantages vs. Ready Mix Cement Delivery• No Truck Mixer needed. Flexible working time vs. set hour of scheduled RMC delivery• Reduce early hardening of cement due to travel time ( traffic ).• No need for Batching Plant; Saves expensive cost of batching plant and truck mixers • No Municaipal Permits to put up a batching plant or register Truck Mixers with LTO• Reduce Manpower – Dieci Self Loading Mixer is a One-Man Operation

Longevity of Euro Parts • Heavy Duty Iveco NEF Engine ( made in Spain ) Bosh Rexroth Hydrostatic

Transmission ( German ) Dana Spicer Axel Driveshaft Cylinders ( Italy ) All Euro Parts • Uses Mineral Oil Fuels which is 3 times or cheaper than synthetic oils; Also uses

regular Diesel Fuel available here in the Phils. Economical Save on 20% on Fuel Cost

RAW MATERIAL ON SITE

CAN OPERATE ON ROUGH TERRAIN

DIECI Self Loading Mixer Features and Advantages

ON SITE UNLOAD

RMC Transit Mixer Limitations vs. DIECI SL Mixer ability to operate in distant locations

NO BATCHING PLANT NEARBY

DRYING TIME OF RMC

DELIVERY

RMC NOT AVAILABLE

CAN TRAVERSE TIGHT AND INCLINE ROADS

SERVICES ISOLATED PROJECT LOCATIONS

CHOOSE CENTRAL RAW

MATERIAL AREA

DIECI Self Loading Mixer Best for Isolated Projects within Proximity

CENTRAL RAW

MATERIAL AREA

Plan for other Equipment needed like a Truck Mounted Concrete Pump or Trailer

SUPPORT EQUIPMENT

Proj

ect

D

Proj

ect A

Proj

ect B

Proj

ect C

Road

s an

d Su

bdi

visio

ns

Hous

ing

War

ehou

se

Build

ing

TYPE OF PROJECT

DIECI Self Loading Mixer Advantages• The advantage of Dieci Self loading truck mixers produce your

ready mix in the actual job site and deliver it to several nearby job sites instead of mixing it at the batching plant and delivering to a remote location

• It can produce ready mix as much as 5 cubic meter every 2.5 hours and repeat the cycle six ( 6 ) times per day.

• Critical to develop is the learning curve with oading, mixing, pump set up discharging and turnaround time

• It has its own in-truck built in batching equipment with an electronic weighing system with sensors , self-loading equipment i.e. shovel and drum, on-board water system and an auxiliary pump and engine in the self-loading mixer truck .

• Save on the cost on the investment of a batching plant and truck mixers. Also saves on manpower and provides accuracy.

10

AN ALL TERRAIN MOBILE BATCHING PLANT• All-in-One “ON SITE” mixing, Self Loading and Unloading Capability• Rough Terrain Transportation• Rotating Driver’s Seat• Ideal for tight and isolated work site• Raw materials at the jobsite capable of batching up to 5cum per cycle• Electronic Weighing System wit multi sensor in shovel and drum reads mix

SELF LOADING CAPABILITY• Built-in Bucket for Raw material Scooping or Loading

3 SIDE UNLOADING CAPABILITY• REAR unloading• LEFT SIDE unloading• RIGHT SIDE unloading

ARTICULATED STEERING • 2 wheels Front Steering – for long no load long distance travelling• Beam Steering – to steer at the least possible radius• Transversal or Crab Steering – to move diagonally

SAFETY FEATURES• ROPS and FOPS• Dead Man’s Switch• Starting Only in Neutral Gear Shift

DIECI Self Loading Mixer Features

11

DIECI Under Chasis

1. Transaxel2. Driveshaft3. Hydraulic motor4. Diesel engine5. Variable displacement pump6. 2-speed transmission7. Hoses8. 8 Steering cylinder9. 9 Planitary final drive

123456789

THE HYDROSTATIC SYSTEM

HYDROSTATIC SYSTEM WITH “DA”• THE BOSH REXROTH HYDROSTATIC TRANSMISSION IS MADE

IN GERMANY

• THIS SYSTEM IS COUPLED WITH THE 74 KW TURBO ENGINE AND WITH THE 94 AND 103 KW TURBO-INTERCOOLER ENGINE. THIS IS USED IN THE DIECI SL MIXER F-7000

• IT HAS 2 MECHANICAL GEARS DUE TO THE GEARBOX AND ITS MAIN FEATURE, THE INFINITE GEARS OF THE SYSTEM PUMP-MOTOR

• WITH TWO SMALL HOSES FROM THE PUMP, THE SYSTEM SEND TO THE MOTOR A PRESSURE INFORMATION. WITH THIS THE MOTOR SET ITSELF IN THE MOST SUITABLE DISPLACEMENT FOR THE WORKING CONDITIONS OF THE MACHINE

HYDROSTATIC SYSTEM WITH “EZ”

• THE BOSH REXROTH HYDROSTATIC TRANSMISSION IS MADE IN GERMANY

• THIS HYDROSTATIC SYSTEM IS COUPLED WITH THE 60 KW ASPIRATE ENGINE. THIS IS USED IN SMALLER MODELS

• THIS SYSTEM HAS 4 GEARS, YOU CAN CHANGE THEM MANUALLY

• IT HAS 2 MECHANICAL GEAR DUE TO THE GEARBOX

• IT HAS 2 ELECTROHYDRAULIC GEARS DUE TO THE MAX/MIN DISPLACEMENT OF THE MOTOR

VARIABLE DISPLACEMENT PUMP

Electronic Weighing System with Printer

3-Side Unloading with Rotating Drivers Seat

Loading Shovel

FUEL EFFICIENCY

QUALITY CONCRETEDieci Heavy Equipment SL F-7000 MixerOPERATING REVENUE

Cost of Investment: VAT Included 6,500,000 VAT Excluded 5,803,571

Yearly Depreciation 1,160,714.29

1st year 2nd year 3rd year

AMOUNT % AMOUNT % AMOUNT %

Benefits (based on P3800 Ready Mix Cost) 34,200,000.00 34,200,000.00 34,200,000.00 (P3800 x 6 cycles x 25 days in a mo. x 12 months x 3.5 / 5 cu.m load)

Benefits 34,200,000.00 100.00 34,200,000.00 100.00 34,200,000.00 100.00 Raw Materials 24,068,376.83 70.38 24,068,376.83 70.38 24,068,376.83 70.38 Gross Profit 10,131,623.17 29.62 10,131,623.17 29.62 10,131,623.17 29.62

Operating Expenses:Labor Cost 562,500.00 1.64 562,500.00 1.64 562,500.00 1.64 Repairs & Maintenance 594,000.00 1.74 990,000.00 2.89 1,320,000.00 3.86 Depreciation 1,160,714.29 3.39 1,160,714.29 3.39 1,160,714.29 3.39 Admin (3%) 1,026,000.00 3.00 1,026,000.00 3.00 1,026,000.00 3.00 Total 3,343,214.29 9.78 3,739,214.29 10.93 4,069,214.29 11.90

Operating Revenue 6,788,408.88 19.85 6,392,408.88 18.69 6,062,408.88 17.73

Raw Materials3. 5 cu.m. to

kg

UNIT PRICE KGUNIT

PRICE / 3.5 CU M

TOTAL COST PER 3.5 CU M

X 6 CYCLES

X 25 DAYS IN A MONTH x 12 months

A B C D = B / C E = D x A F = E x 6 G = F x 25 H = G x 12

S1/ 3/8/ 3/4 MIX 6,000 775.00 1,480 0.52 3,141.89 18,851.35 471,283.78 5,655,405.41

CEMENT 1,600 208.00 40 5.20 8,320.00 49,920.00 1,248,000.00 14,976,000.00

SAND 3,000 850.00 1,400 0.61 1,821.43 10,928.57 273,214.29 3,278,571.43

WATER 880 0.10 88.00 528.00 13,200.00 158,400.00

TOTAL COST FOR ONE YEAR 24,068,376.83

Labor NO. OF MANPOWER

NO. OF HOURS HOURLY RATE DAILY

RATE MONTHLY YEARLY

LABOR OPERATOR 1 10 187.50 1,875.00 46,875.00 562,500.00

Repairs 1st year 2nd year 3rd year

Preventive Maintenance

220,000.00

385,000.00

550,000.00

Corrective Maintenance

330,000.00

550,000.00

770,000.00

Training Travel and Misc

44,000.00

55,000.00

66,000.00

Total Maintenance Cost

594,000.00

990,000.00

1,320,000.00

QUALITY CONCRETEDieci Heavy Equipment SL L-4700 MixerOPERATING REVENUE

Cost of Investment: VAT Included 5,500,000 VAT Excluded 4,910,714

Yearly Depreciation 982,142.86

1st year 2nd year 3rd year

AMOUNT % AMOUNT % AMOUNT %

Benefits (based on P3800 Ready Mix Cost) 23,940,000.00 23,940,000.00 23,940,000.00 (P3800 x 6 cycles x 25 days in a mo. x 12 months x 3.5 / 5 cu.m load)

Benefits 23,940,000.00 100.00 23,940,000.00 100.00 23,940,000.00 100.00 Raw Materials 16,847,863.78 70.38 16,847,863.78 70.38 16,847,863.78 70.38 Gross Profit 7,092,136.22 29.62 7,092,136.22 29.62 7,092,136.22 29.62

Operating Expenses:Labor Cost 562,500.00 2.35 562,500.00 2.35 562,500.00 2.35 Repairs & Maintenance 540,000.00 2.26 900,000.00 3.76 1,200,000.00 5.01 Depreciation 982,142.86 4.10 982,142.86 4.10 982,142.86 4.10 Admin (3%) 718,200.00 3.00 718,200.00 3.00 718,200.00 3.00 Total 2,802,842.86 11.71 3,162,842.86 13.21 3,462,842.86 14.46

Operating Revenue 4,289,293.36 17.92 3,929,293.36 16.41 3,629,293.36 15.16

Raw Materials 3. 5 cu.m. to kg

UNIT PRICE KGUNIT

PRICE / 3.5 CU M

TOTAL COST PER 3.5 CU M

X 6 CYCLES

X 25 DAYS IN A MONTH x 12 months

A B C D = B / C E = D x A F = E x 6 G = F x 25 H = G x 12

S1/ 3/8/ 3/4 MIX 4,200 775.00 1,480 0.52 2,199.32 13,195.95 329,898.65 3,958,783.78

CEMENT 1,120 208.00 40 5.20 5,824.00 34,944.00 873,600.00 10,483,200.00

SAND 2,100 850.00 1,400 0.61 1,275.00 7,650.00 191,250.00 2,295,000.00

WATER 616 0.10 61.60 369.60 9,240.00 110,880.00

TOTAL COST FOR ONE YEAR 16,847,863.78

Labor NO. OF MANPOWER

NO. OF HOURS HOURLY RATE DAILY

RATE MONTHLY YEARLY

LABOR OPERATOR 1 10 187.50 1,875.00 46,875.00 562,500.00

Repairs 1st year 2nd year 3rd year

Preventive Maintenance

200,000.00

350,000.00

500,000.00

Corrective Maintenance

300,000.00

500,000.00

700,000.00

Training Travel and Misc

40,000.00

50,000.00

60,000.00

Total Maintenance Cost

540,000.00

900,000.00

1,200,000.00

QUALITY CONCRETE

Dieci Heavy Equipment SL Mixer L-4700

RATE OF RETURN OF INVESTMENT (ROI)

Cost of Investment: VAT Included 5,500,000 Yearly Depr. 982,143 5 Yrs to depreciate

VAT Excluded 4,910,714

Let CI represent the Cost of Investment (VAT Excluded) 4,910,714

RATE OF RETURN Average Operating Revenue (AOR) 3,949,293

80.42%OF INVESTMENT Investment 4,910,714

AVERAGE NET(AOR + D) - (AOR x 30%) 3,746,648

CASH INFLOW

PAYBACK Cost of Invesment 4,910,714 1.31 years

PERIOD Average Net Cash Inflow 3,746,648

YEAR

OPERATING REVENUE RATE OF ROI (Before

tax)OR % to SALES NET CASH INFLOW PAYBACK PERIOD

REMARKSYEARLYA B = A / C1 C = (A+D) - (A x 30%) D = CI / C

1 YR 4,289,293 87.35% 17.92 3,984,648 1.23 2 YRS 3,929,293 80.01% 16.41 3,732,648 1.32 Viability Point3 YRS 3,629,293 73.91% 15.16 3,522,648 1.39

Average 3,949,293 3,746,648

=

=

=

QUALITY CONCRETE

Dieci Heavy Equipment SL Mixer F-7000

RATE OF RETURN OF INVESTMENT (ROI)

Cost of Investment: VAT Included 6,500,000 Yearly Depr. 1,160,714 5 Yrs to depreciate

VAT Excluded 5,803,571

Let CI represent the Cost of Investment (VAT Excluded) 5,803,571

RATE OF RETURN Average Operating Revenue (AOR) 6,414,409

110.53%OF INVESTMENT Investment 5,803,571

AVERAGE NET(AOR + D) - (AOR x 30%) 5,650,801

CASH INFLOW

PAYBACK Cost of Invesment 5,803,571 1.03 years

PERIOD Average Net Cash Inflow 5,650,801

YEAR

OPERATING REVENUE RATE OF ROI (Before

tax)OR % to SALES NET CASH INFLOW PAYBACK PERIOD

REMARKSYEARLY

A B = A / C1 C = (A+D) - (A x 30%) D = CI / C1 YR 6,788,409 116.97% 17.92 5,912,601 0.98 2 YRS 6,392,409 110.15% 16.41 5,635,401 1.03 Viability Point3 YRS 6,062,409 104.46% 15.16 5,404,401 1.07

Average 6,414,409 5,650,801

=

=

=

Other Dieci Telehandler Products