Post on 13-Aug-2015
description
nahtlose Bogen, gedrücktseamless bend
90°
für Stumpf- und Elektromuffenschweissung*in Anlehnung an DIN 16963, Teil 3, aus Rohr geformt
for butt- and electro-fusion-welding*
PE- 100 PE- 80 schwarz
PE-HD Artikelnummer4 19 04 xx x
PE-80 Artikelnummer1 19 04 xx 6
SDR 17 / SDR 17,6 SDR 11
mm mm mm mm
da Art.-Nr. € Art.-Nr. € le R z
50 05 1 32.10 05 2 33.50 123 75 250
63 06 1 36.50 06 2 38.40 123 95 270
75 07 1 38.90 07 2 41.20 131 113 300
90 09 1 41.20 09 2 55.00 116 135 300
110 11 1 55.00 11 2 69.30 151 165 380
125 12 1 65.30 12 2 82.40 163 188 420
140 14 1 76.70 14 2 96.20 168 210 450
160 16 1 103.00 16 2 142.00 196 240 520
180 18 1 143.10 18 2 198.10 217 270 580
200 20 1 177.40 20 2 242.70 224 300 620
225 22 1 195.80 22 2 262.00 254 338 700
250 25 1 243.20 25 2 347.90 242 375 720
280 28 1 346.20 28 2 438.60 238 420 760
315 31 1 404.10 31 2 528.90 334 473 950
355 35 1 569.00 35 2 864.30 397 533 1100
400 40 1 787.60 40 2 957.10 420 600 1200
450 45 1 1065.60 45 2 1305.50 315 900 1350
500 50 1 1529.80 50 2 1963.60 385 1000 1550
560 56 1 1768.80 56 2 2292.60 546 1120 1900
630 63 1 2210.00 63 2 2936.40 588 1260 2100
710 71 1 3210.00 71 2 4296.70 570 1440 2200
800 80 1 5049.00 480 1600 2200
bei gedrückten Bogen sind Abweichungen von + / - 3° möglich
* bitte bei Bestellung angeben, Maßabweichungen möglich
andere Abmessungen, Winkelgrade und Druckstufen auf Anfrage, Fertigung auf Bestellung, keine Rücknahme
seamless bends can be + / - 3° / *please write on order
other dimensions, degrees and pressure factor on request - production on order, no repurchase
coextrudiert, schwarz mit heller Innenfläche nur in SDR 17,6
1
nahtlose Bogen, gedrücktseamless bend60°
für Stumpf- und Elektromuffenschweissung*in Anlehnung an DIN 16963, Teil 3, aus Rohr geformt
for butt- and electro-fusion-welding*
PE- 100 PE- 80 schwarz
PE-HD Artikelnummer4 16 04 xx x
PE-80 Artikelnummer1 16 04 xx 6
SDR 17 / SDR 17,6 SDR 11
mm mm mm mm
da Art.-Nr. € Art.-Nr. € le R z
50 05 1 31.60 05 2 33.10 110 75 200
63 06 1 35.90 06 2 37.20 116 95 220
75 07 1 38.20 07 2 40.10 123 113 240
90 09 1 40.80 09 2 53.60 1273 135 260
110 11 1 54.60 11 2 67.80 150 165 280
125 12 1 64.30 12 2 80.30 150 188 300
140 14 1 75.70 14 2 94.90 195 210 400
160 16 1 101.30 16 2 138.50 204 240 430
180 18 1 141.50 18 2 195.00 206 270 450
200 20 1 174.90 20 2 238.10 229 300 500
225 22 1 193.70 22 2 259.50 249 338 550
250 25 1 242.10 25 2 336.50 268 375 600
280 28 1 330.20 28 2 415.60 271 420 630
315 31 1 401.30 31 2 524.90 390 473 830
355 35 1 557.50 35 2 859.70 415 533 900
400 40 1 776.20 40 2 950.20 458 600 1000
450 45 1 993.90 45 2 1192.90 417 900 1115
500 50 1 1385.20 50 2 1711.50 506 1000 1300
560 56 1 1677.10 56 2 2122.60 562 1120 1450
630 63 1 2092.70 63 2 2804.60 611 1260 1600
710 71 1 3153.90 71 2 4235.80 570 1440 1700
800 80 1 4695.60 480 1600 1700
bei gedrückten Bogen sind Abweichungen von + / - 3° möglich
* bitte bei Bestellung angeben, Maßabweichungen möglich
andere Abmessungen, Winkelgrade und Druckstufen auf Anfrage, Fertigung auf Bestellung, keine Rücknahme
seamless bends can be + / - 3° / *please write on order
other dimensions, degrees and pressure factor on request - production on order, no repurchase
coextrudiert, schwarz mit heller Innenfläche nur in SDR 17,6
2
nahtlose Bogen, gedrücktseamless bend
45°
für Stumpf- und Elektromuffenschweissung*in Anlehnung an DIN 16963, Teil 3, aus Rohr geformt
for butt- and electro-fusion-welding*
PE- 100 PE- 80 schwarz
PE-HD Artikelnummer4 14 04 xx x
PE-80 Artikelnummer1 14 04 xx 6
SDR 17 / SDR 17,6 SDR 11
mm mm mm mm
da Art.-Nr. € Art.-Nr. € le R z
50 05 1 31.60 05 2 33.10 100 75 170
63 06 1 35.90 06 2 37.20 100 95 180
75 07 1 38.20 07 2 40.10 100 113 200
90 09 1 40.80 09 2 53.60 100 135 220
110 11 1 54.60 11 2 67.80 150 165 240
125 12 1 64.30 12 2 80.30 150 188 270
140 14 1 75.70 14 2 94.90 150 210 300
160 16 1 101.30 16 2 138.50 180 240 330
180 18 1 141.50 18 2 195.00 188 270 380
200 20 1 169.90 20 2 238.20 214 300 430
225 22 1 190.70 22 2 253.90 252 338 500
250 25 1 240.50 25 2 317.80 262 375 530
280 28 1 322.90 28 2 411.30 263 420 550
315 31 1 396.90 31 2 520.80 318 473 650
355 35 1 551.90 35 2 857.20 301 533 650
400 40 1 767.10 40 2 943.00 337 600 730
450 45 1 922.50 45 2 1159.30 320 900 830
500 50 1 1263.20 50 2 1623.90 480 1000 1100
560 56 1 1614.70 56 2 2092.60 456 1120 1115
630 63 1 2015.00 63 2 2688.10 580 1260 1350
710 71 1 2969.60 71 2 4025.10 570 1440 1400
800 71 1 4542.80 480 1600 1500
bei gedrückten Bogen sind Abweichungen von + / - 3° möglich
* bitte bei Bestellung angeben, Maßabweichungen möglich
andere Abmessungen, Winkelgrade und Druckstufen auf Anfrage, Fertigung auf Bestellung, keine Rücknahme
seamless bends can be + / - 3° / *please write on order
other dimensions, degrees and pressure factor on request - production on order, no repurchase
coextrudiert, schwarz mit heller Innenfläche nur in SDR 17,6
3
nahtlose Bogen, gedrücktseamless bend30°
für Stumpf- und Elektromuffenschweissung*in Anlehnung an DIN 16963, Teil 3, aus Rohr geformt
for butt- and electro-fusion-welding*
PE- 100 PE- 80 schwarz
PE-HD Artikelnummer4 13 04 xx x
PE-80 Artikelnummer1 13 04 xx 6
SDR 17 / SDR 17,6 SDR 11
mm mm mm mm
da Art.-Nr. € Art.-Nr. € le R z
50 05 1 31.60 05 2 33.10 105 75 170
63 06 1 35.90 06 2 37.20 108 95 180
75 07 1 38.20 07 2 40.10 119 113 200
90 09 1 40.80 09 2 53.60 129 135 220
110 11 1 54.60 11 2 67.80 130 165 230
125 12 1 64.30 12 2 80.30 150 188 260
140 14 1 75.70 14 2 94.90 171 210 300
160 16 1 101.30 16 2 138.50 180 240 300
180 18 1 141.50 18 2 195.00 180 270 330
200 20 1 169.90 20 2 238.20 238 300 420
225 22 1 190.70 22 2 253.90 252 338 450
250 25 1 240.50 25 2 317.80 301 375 530
280 28 1 322.90 28 2 411.30 292 420 530
315 31 1 396.90 31 2 520.80 366 473 650
355 35 1 551.90 35 2 857.20 355 533 650
400 40 1 767.10 40 2 943.00 370 600 690
450 45 1 922.50 45 2 1159.30 342 900 730
500 50 1 1263.20 50 2 1623.90 582 1000 1100
560 56 1 1614.70 56 2 2092.60 560 1120 1100
630 63 1 2015.00 63 2 2688.10 639 1260 1250
710 71 1 2969.60 71 2 4025.10 570 1440 1350
800 71 1 4542.80 480 1600 1450
bei gedrückten Bogen sind Abweichungen von + / - 3° möglich
* bitte bei Bestellung angeben, Maßabweichungen möglich
andere Abmessungen, Winkelgrade und Druckstufen auf Anfrage, Fertigung auf Bestellung, keine Rücknahme
seamless bends can be + / - 3° / *please write on order
other dimensions, degrees and pressure factor on request - production on order, no repurchase
coextrudiert, schwarz mit heller Innenfläche nur in SDR 17,6
4
nahtlose Bogen, gedrücktseamless bend
22°
für Stumpf- und Elektromuffenschweissung*in Anlehnung an DIN 16963, Teil 3, aus Rohr geformt
for butt- and electro-fusion-welding*
PE- 100 PE- 80 schwarz
PE-HD Artikelnummer4 12 04 xx x
PE-80 Artikelnummer1 12 04 xx 6
SDR 17 / SDR 17,6 SDR 11
mm mm mm mm
da Art.-Nr. € Art.-Nr. € le R z
50 05 1 31.60 05 2 33.10 109 75 170
63 06 1 35.90 06 2 37.20 113 95 180
75 07 1 38.20 07 2 40.10 125 113 200
90 09 1 40.80 09 2 53.60 136 135 220
110 11 1 54.60 11 2 67.80 150 165 230
125 12 1 64.30 12 2 80.30 156 188 260
140 14 1 75.70 14 2 94.90 181 210 300
160 16 1 101.30 16 2 138.50 180 240 300
180 18 1 141.50 18 2 195.00 194 270 330
200 20 1 169.90 20 2 238.20 253 300 420
225 22 1 190.70 22 2 253.90 269 338 450
250 25 1 240.50 25 2 317.80 320 375 530
280 28 1 322.90 28 2 411.30 314 420 530
315 31 1 396.90 31 2 520.80 377 473 630
355 35 1 551.90 35 2 857.20 383 533 650
400 40 1 767.10 40 2 943.00 380 600 660
450 45 1 922.50 45 2 1159.30 340 900 660
500 50 1 1263.20 50 2 1623.90 564 1000 1000
560 56 1 1614.70 56 2 2092.60 548 1120 1000
630 63 1 2015.00 63 2 2688.10 599 1260 1100
710 71 1 2969.60 71 2 4025.10 570 1440 1300
800 71 1 4542.80 480 1600 1400
bei gedrückten Bogen sind Abweichungen von + / - 3° möglich
* bitte bei Bestellung angeben, Maßabweichungen möglich
andere Abmessungen, Winkelgrade und Druckstufen auf Anfrage, Fertigung auf Bestellung, keine Rücknahme
seamless bends can be + / - 3° / *please write on order
other dimensions, degrees and pressure factor on request - production on order, no repurchase
coextrudiert, schwarz mit heller Innenfläche nur in SDR 17,6
5
nahtlose Bogen, gedrücktseamless bend11°
für Stumpf- und Elektromuffenschweissung*in Anlehnung an DIN 16963, Teil 3, aus Rohr geformt
for butt- and electro-fusion-welding*
PE- 100 PE- 80 schwarz
PE-HD Artikelnummer4 11 04 xx x
PE-80 Artikelnummer1 11 04 xx 6
SDR 17 / SDR 17,6 SDR 11
mm mm mm mm
da Art.-Nr. € Art.-Nr. € le R z
50 05 1 31.60 05 2 33.10 114 75 170
63 06 1 35.90 06 2 37.20 120 95 180
75 07 1 38.20 07 2 40.10 132 113 200
90 09 1 40.80 09 2 53.60 145 135 220
110 11 1 54.60 11 2 67.80 150 165 230
125 12 1 64.30 12 2 80.30 169 188 260
140 14 1 75.70 14 2 94.90 196 210 300
160 16 1 101.30 16 2 138.50 194 240 300
180 18 1 141.50 18 2 195.00 213 270 330
200 20 1 169.90 20 2 238.20 274 300 420
225 22 1 190.70 22 2 253.90 292 338 450
250 25 1 240.50 25 2 317.80 346 375 530
280 28 1 322.90 28 2 411.30 343 420 530
315 31 1 396.90 31 2 520.80 409 473 630
355 35 1 551.90 35 2 857.20 419 533 650
400 40 1 767.10 40 2 943.00 422 600 660
450 45 1 922.50 45 2 1159.30 401 900 660
500 50 1 1263.20 50 2 1623.90 633 1000 1000
560 56 1 1614.70 56 2 2092.60 625 1120 1000
630 63 1 2015.00 63 2 2688.10 685 1260 1100
710 71 1 2969.60 71 2 4025.10 570 1440 1250
800 71 1 4542.80 480 1600 1350
bei gedrückten Bogen sind Abweichungen von + / - 3° möglich
* bitte bei Bestellung angeben, Maßabweichungen möglich
andere Abmessungen, Winkelgrade und Druckstufen auf Anfrage, Fertigung auf Bestellung, keine Rücknahme
seamless bends can be + / - 3° / *please write on order
other dimensions, degrees and pressure factor on request - production on order, no repurchase
coextrudiert, schwarz mit heller Innenfläche nur in SDR 17,6
6
Segmentbogenbend segment welded
R = 1,5 x da 90°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
for butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 19 03 xx x
SDR 33 SDR 17 SDR 11
mm Art.- Art.- Art.- mm mm mm
da Nr. € Nr. € Nr. € le R z
110 11 3 70.70 11 1 85.40 11 2 107.50 150 165 315
125 12 3 82.10 12 1 101.50 12 2 130.90 150 188 338
140 14 3 94.80 14 1 106.40 14 2 144.60 150 210 360
160 16 3 99.00 16 1 123.50 16 2 166.20 150 240 390
180 18 3 113.90 18 1 155.90 18 2 214.30 150 270 420
200 20 3 124.60 20 1 184.90 20 2 253.70 150 300 450
225 22 3 155.60 22 1 223.10 22 2 291.70 150 338 488
250 25 3 184.40 25 1 281.30 25 2 343.20 250 375 625
280 28 3 219.30 28 1 355.10 28 2 433.90 250 420 670
315 31 3 288.60 31 1 430.80 31 2 545.40 300 473 778
355 35 3 369.30 35 1 561.50 35 2 643.00 300 533 833
400 40 3 482.40 40 1 730.70 40 2 899.70 300 600 900
450 45 3 765.40 45 1 1038.40 45 2 1340.70 300 675 975
500 50 3 964.80 50 1 1347.50 50 2 1718.50 350 750 1100
560 56 3 1204.00 56 1 1744.20 56 2 2692.10 350 840 1190
630 63 3 1528.00 63 1 2309.10 63 2 3413.20 350 945 1295
710 71 3 1842.10 71 1 3266.30 350 1065 1415
800 80 3 2464.60 80 1 4229.00 350 1200 1550
900 90 3 3196.10 90 1 5943.60 350 1350 1700
1000 91 3 4463.70 91 1 7372.50 400 1500 1900
1200 92 3 7212.20 92 1 11562.50 400 1800 2200
Verschwächungsbeiwert 0,8
Segmentbogen mit GFK-Verstärkung auf Anfrage
andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factor 0,8 - segment bends with reinforcement on request
other pressure factor on request - PE-80 / PE-100 production on order, no repurchase
7
Segmentbogenbend segment welded
R = 1,5 x da 60°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
for butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 16 03 xx x
SDR 33 SDR 17 SDR 11
mm Art.- Art.- Art.- mm mm mm
da Nr. € Nr. € Nr. € le R z
110 11 3 55.20 11 1 72.50 11 2 88.70 150 165 245
125 12 3 65.00 12 1 86.40 12 2 99.10 150 188 258
140 14 3 73.60 14 1 99.70 14 2 120.40 150 210 271
160 16 3 75.00 16 1 109.00 16 2 135.10 150 240 288
180 18 3 77.80 18 1 122.80 18 2 158.00 150 270 305
200 20 3 91.90 20 1 140.40 20 2 180.10 150 300 323
225 22 3 106.10 22 1 157.60 22 2 225.00 150 338 345
250 25 3 134.40 25 1 211.30 25 2 276.50 250 375 466
280 28 3 162.70 28 1 272.10 28 2 347.60 250 420 492
315 31 3 191.00 31 1 337.90 31 2 425.20 300 473 576
355 35 3 270.20 35 1 452.10 35 2 623.30 300 533 608
400 40 3 340.30 40 1 604.60 40 2 824.00 300 600 646
450 45 3 502.20 45 1 785.10 45 2 1112.60 300 675 689
500 50 3 629.60 50 1 1063.50 50 2 1581.30 350 750 783
560 56 3 768.30 56 1 1362.40 56 2 1918.00 350 840 835
630 63 3 942.30 63 1 2105.10 63 2 2437.10 350 945 896
710 71 3 1416.20 71 1 2197.80 350 1065 965
800 80 3 1768.50 80 1 2714.50 350 1200 1043
900 90 3 2419.30 90 1 4259.90 350 1350 1179
1000 91 3 2903.20 91 1 5391.80 400 1500 1266
1200 92 3 4500.00 92 1 8345.60 400 1800 1439
Verschwächungsbeiwert 0,8
Segmentbogen mit GFK-Verstärkung auf Anfrage
andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factor 0,8 - segment bends with reinforcement on request
other pressure factor on request - PE-80 / PE-100 production on order, no repurchase
8
Segmentbogenbend segment welded
R = 1,5 x da 45°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
for butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 14 03 xx x
SDR 33 SDR 17 SDR 11
mm Art.- Art.- Art.- mm mm mm
da Nr. € Nr. € Nr. € le R z
110 11 3 53.80 11 1 64.10 11 2 81.10 150 165 218
125 12 3 63.70 12 1 76.40 12 2 91.10 150 188 228
140 14 3 70.70 14 1 86.40 14 2 104.70 150 210 237
160 16 3 75.00 16 1 91.90 16 2 114.70 150 240 249
180 18 3 77.80 18 1 108.40 18 2 135.50 150 270 262
200 20 3 90.60 20 1 127.20 20 2 155.90 150 300 274
225 22 3 104.70 22 1 143.20 22 2 189.10 150 338 290
250 25 3 135.80 25 1 187.60 25 2 247.20 250 375 412
280 28 3 164.20 28 1 248.00 28 2 311.70 250 420 424
315 31 3 198.10 31 1 304.70 31 2 380.00 300 473 498
355 35 3 261.70 35 1 384.90 35 2 485.70 300 533 520
400 40 3 332.40 40 1 507.00 40 2 605.80 300 600 548
450 45 3 495.10 45 1 674.30 45 2 832.70 300 675 580
500 50 3 622.50 50 1 885.60 50 2 1105.60 350 750 665
560 56 3 749.80 56 1 1103.90 56 2 1751.80 350 840 698
630 63 3 990.40 63 1 1415.00 63 2 2192.10 350 945 741
710 71 3 1274.70 71 1 2074.70 350 1065 792
800 80 3 1670.80 80 1 2540.30 350 1200 847
900 90 3 2238.20 90 1 3961.50 350 1350 960
1000 91 3 2831.00 91 1 5093.30 400 1500 1022
1200 92 3 4388.00 92 1 7969.00 400 1800 1145
Verschwächungsbeiwert 0,8
Segmentbogen mit GFK-Verstärkung auf Anfrage
andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factor 0,8 - segment bends with reinforcement on request
other pressure factor on request - PE-80 / PE-100 production on order, no repurchase
9
Segmentbogenbend segment welded
R = 1,5 x da 11 - 30°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
for butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer11° = 4 11 03 xx x / 22° = 4 12 03 xx x / 30° = 4 13 03 xx x
SDR 33 SDR 17 SDR 11
mm Art.- Art.- Art.- mm mm mm
da Nr. € Nr. € Nr. € le R z
110 11 3 45.10 11 1 47.40 11 2 53.80 150 165 194
125 12 3 50.60 12 1 53.20 12 2 61.10 150 188 200
140 14 3 55.60 14 1 61.90 14 2 75.10 150 210 206
160 16 3 64.10 16 1 67.70 16 2 82.70 150 240 214
180 18 3 68.50 18 1 78.20 18 2 100.70 150 270 220
200 20 3 76.10 20 1 91.60 20 2 110.50 150 300 230
225 22 3 84.50 22 1 102.80 22 2 136.30 150 338 241
250 25 3 106.70 25 1 139.60 25 2 180.50 250 375 350
280 28 3 131.20 28 1 178.40 28 2 225.10 250 420 362
315 31 3 158.80 31 1 219.30 31 2 269.70 300 473 428
355 35 3 207.00 35 1 273.40 35 2 343.90 300 533 443
400 40 3 242.10 40 1 359.70 40 2 451.20 300 600 461
450 45 3 325.40 45 1 510.70 45 2 669.90 300 675 481
500 50 3 384.70 50 1 612.50 50 2 820.60 350 750 551
560 56 3 450.10 56 1 779.00 56 2 1262.40 350 840 575
630 63 3 581.80 63 1 976.20 63 2 1587.30 350 945 603
710 71 3 984.40 71 1 1533.50 350 1065 636
800 80 3 1240.40 80 1 1808.60 350 1200 672
900 90 3 1746.60 90 1 3055.90 350 1350 762
1000 91 3 2284.90 91 1 3961.50 400 1500 802
1200 92 3 3546.60 92 1 5266.10 400 1800 882
Verschwächungsbeiwert 0,8
Segmentbogen mit GFK-Verstärkung auf Anfrage
andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factor 0,8 - segment bends with reinforcement on request
other pressure factor on request - PE-80 / PE-100 production on order, no repurchase
10
Segment-T-Stücktee segment welded
90°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
for butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 20 03 xx x
SDR 33 SDR 17 SDR 11
mm Art.- Art.- Art.- mm mm mm
da Nr. € Nr. € Nr. € L l z
160 16 3 150.90 16 1 167.60 16 2 232.20 460 150 230
180 18 3 170.20 18 1 189.10 18 2 267.80 480 150 240
200 20 3 200.30 20 1 222.50 20 2 333.40 500 150 250
225 22 3 219.10 22 1 243.50 22 2 343.90 530 150 265
250 25 3 273.40 25 1 303.70 25 2 416.70 750 250 375
280 28 3 313.30 28 1 348.10 28 2 507.40 780 250 390
315 31 3 388.90 31 1 432.00 31 2 622.10 920 300 460
355 35 3 489.10 35 1 543.40 35 2 820.00 960 300 480
400 40 3 580.50 40 1 645.00 40 2 1025.60 1000 300 500
450 45 3 808.50 45 1 898.20 45 2 1251.30 1050 300 525
500 50 3 1152.10 50 1 1280.10 50 2 1707.50 1200 350 600
560 56 3 1650.50 56 1 1833.90 56 2 3414.40 1260 350 630
630 63 3 2025.60 63 1 2250.70 63 2 4140.70 1330 350 665
710 71 3 2697.00 71 1 2996.70 1410 350 705
800 80 3 3200.90 80 1 3556.60 1500 350 750
900 90 3 4746.30 90 1 6074.30 1700 400 850
1000 91 3 7200.80 91 1 9288.90 2040 520 1020
1200 92 3 8586.00 92 1 10990.10 2500 650 1250
Verschwächungsbeiwert 0,6
Segment-T-Stück mit GFK-Verstärkung auf Anfrage
andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factor 0,6 - segment tees with reinforcement on request
other pressure factor on request - PE-80 / PE-100 production on order, no repurchase
11
T-Stück mit reduziertem Abgangreduced tee welded90°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
fot butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 23 xx xx x
SDR 17 SDR 11
mm mm Art.- Art.- mm mm Aus-
da 1 da 2 Nr. € Nr. € L z führ.
110 32 1103 1 41.90 1103 2 53.20 632 180 A
110 40 1104 1 47.10 1104 2 59.50 640 180 A
110 50 1105 1 53.80 1105 2 68.50 650 180 A
110 63 1106 1 61.50 1106 2 78.10 663 180 B
110 75 1107 1 71.90 1107 2 91.40 675 180 B
125 32 1203 1 46.10 1203 2 58.80 632 188 A
125 40 1204 1 52.20 1204 2 64.60 640 188 A
125 50 1205 1 58.50 1205 2 74.10 650 188 A
125 63 1206 1 65.50 1206 2 83.50 663 188 B
125 75 1207 1 76.20 1207 2 97.10 675 188 B
125 90 1209 1 90.70 1209 2 115.50 690 188 B
140 32 1403 1 49.90 1403 2 64.70 632 195 A
140 40 1404 1 57.70 1404 2 69.70 640 195 A
140 50 1405 1 63.30 1405 2 79.40 650 195 A
140 63 1406 1 70.20 1406 2 89.20 663 195 B
140 75 1407 1 80.60 1407 2 101.90 675 195 B
140 90 1409 1 97.80 1409 2 123.10 690 195 B
140 110 1411 1 112.80 1411 2 141.40 710 195 B
160 32 1603 1 54.50 1603 2 70.90 632 205 A
160 40 1604 1 63.40 1604 2 77.30 640 205 A
160 50 1605 1 69.10 1605 2 90.30 650 205 A
160 63 1606 1 74.50 1606 2 101.40 663 205 B
160 75 1607 1 84.80 1607 2 115.50 675 205 B
160 90 1609 1 101.90 1609 2 138.40 690 205 B
160 110 1611 1 116.20 1611 2 157.50 710 205 B
160 125 1612 1 128.90 1612 2 174.80 725 205 B
180 32 1803 1 64.20 1803 2 81.90 632 240 A
180 40 1804 1 71.40 1804 2 90.70 640 240 A
180 50 1805 1 81.10 1805 2 103.40 650 240 A
Verschwächungsbeiwerte: Ausführung A - gesattelt - 0,6 / Ausführung B - gehalst - 0,75
reduziertes T-Stück mit GFK-Verstärkung auf Anfrage
reduziertes T-Stück mit Gewindestutzen von 1/2“ bis 2 1/2“ / andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factors: A - saddlemounted - 0,60 / B - swept - 0,75
tees with reinforcement and other pressure factors on request - PE-80 / PE-100 production on order, no repurchase
12
T-Stück mit reduziertem Abgangreduced tee welded
90°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
fot butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 23 xx xx x
SDR 17 SDR 11
mm mm Art.- Art.- mm mm Aus-
da 1 da 2 Nr. € Nr. € L z führ.
180 63 1806 1 83.50 1806 2 110.60 663 240 B
180 75 1807 1 93.50 1807 2 124.20 675 240 B
180 90 1809 1 109.80 1809 2 146.60 690 240 B
180 110 1811 1 124.20 1811 2 166.10 710 240 B
180 125 1812 1 137.50 1812 2 184.00 725 240 B
180 140 1814 1 154.30 1814 2 206.10 740 240 B
200 32 2003 1 74.40 2003 2 98.70 732 250 A
200 40 2004 1 79.30 2004 2 111.50 740 250 A
200 50 2005 1 86.40 2005 2 124.60 750 250 A
200 63 2006 1 93.60 2006 2 135.70 763 250 B
200 75 2007 1 103.80 2007 2 150.90 775 250 B
200 90 2009 1 120.80 2009 2 174.20 790 250 B
200 110 2011 1 134.90 2011 2 195.00 810 250 B
200 125 2012 1 145.30 2012 2 211.00 825 250 B
200 140 2014 1 160.00 2014 2 231.50 840 250 B
200 160 2016 1 171.10 2016 2 247.20 860 250 B
225 63 2206 1 106.00 2206 2 152.60 763 238 B
225 75 2207 1 116.70 2207 2 167.30 775 238 B
225 90 2209 1 132.30 2209 2 190.80 790 238 B
225 110 2211 1 146.20 2211 2 211.60 810 238 B
225 125 2212 1 158.90 2212 2 229.80 825 238 B
225 140 2214 1 175.40 2214 2 253.10 840 238 B
225 160 2216 1 185.00 2216 2 267.50 860 238 B
225 180 2218 1 194.80 2218 2 282.50 880 238 B
250 75 2507 1 125.10 2507 2 181.60 875 250 B
250 90 2509 1 141.80 2509 2 205.00 890 250 B
250 110 2511 1 155.70 2511 2 225.50 910 250 B
250 125 2512 1 168.40 2512 2 244.20 925 250 B
250 140 2514 1 186.10 2514 2 267.30 940 250 B
Verschwächungsbeiwerte: Ausführung A - gesattelt - 0,6 / Ausführung B - gehalst - 0,75
reduziertes T-Stück mit GFK-Verstärkung auf Anfrage
reduziertes T-Stück mit Gewindestutzen von 1/2“ bis 2 1/2“ / andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factors: A - saddlemounted - 0,60 / B - swept - 0,75
tees with reinforcement and other pressure factors on request - PE-80 / PE-100 production on order, no repurchase
13
T-Stück mit reduziertem Abgangreduced tee welded90°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
fot butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 23 xx xx x
SDR 17 SDR 11
mm mm Art.- Art.- mm mm Aus-
da 1 da 2 Nr. € Nr. € L z führ.
250 160 2516 1 196.10 2516 2 283.20 960 250 B
250 180 2518 1 205.60 2518 2 297.30 980 250 B
250 200 2520 1 217.60 2520 2 315.60 1000 250 B
280 75 2807 1 142.00 2807 2 206.60 875 265 B
280 90 2809 1 159.40 2809 2 230.20 890 265 B
280 110 2811 1 174.50 2811 2 251.30 910 265 B
280 125 2812 1 185.70 2812 2 269.10 925 265 B
280 140 2814 1 203.10 2814 2 292.80 940 265 B
280 160 2816 1 212.70 2816 2 307.30 960 265 B
280 180 2818 1 222.40 2818 2 323.30 980 290 B
280 200 2820 1 233.10 2820 2 340.00 1000 290 B
280 225 2822 1 244.20 2822 2 356.80 1025 290 B
315 90 3109 1 178.70 3109 2 247.70 890 283 B
315 110 3111 1 192.70 3111 2 268.50 910 283 B
315 125 3112 1 206.60 3112 2 288.90 925 283 B
315 140 3114 1 223.70 3114 2 312.80 940 283 B
315 160 3116 1 238.50 3116 2 334.60 960 283 B
315 180 3118 1 250.80 3118 2 352.60 980 308 B
315 200 3120 1 262.00 3120 2 369.00 1000 208 B
315 225 3122 1 276.90 3122 2 390.60 1025 308 B
315 250 3125 1 297.00 3125 2 412.10 1050 358 B
355 110 3511 1 252.40 3511 2 309.00 910 303 B
355 125 3512 1 263.50 3512 2 327.60 925 303 B
355 140 3514 1 281.30 3514 2 352.10 940 303 B
355 160 3516 1 296.40 3516 2 374.90 960 303 B
355 180 3518 1 308.80 3518 2 393.10 980 328 B
355 200 3520 1 324.00 3520 2 416.00 1000 328 B
355 225 3522 1 340.00 3522 2 439.00 1025 328 B
355 250 3525 1 361.60 3525 2 471.00 1050 378 B
Verschwächungsbeiwerte: Ausführung A - gesattelt - 0,6 / Ausführung B - gehalst - 0,75
reduziertes T-Stück mit GFK-Verstärkung auf Anfrage
reduziertes T-Stück mit Gewindestutzen von 1/2“ bis 2 1/2“ / andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factors: A - saddlemounted - 0,60 / B - swept - 0,75
tees with reinforcement and other pressure factors on request - PE-80 / PE-100 production on order, no repurchase
14
T-Stück mit reduziertem Abgangreduced tee welded
90°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
fot butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 23 xx xx x
SDR 17 SDR 11
mm mm Art.- Art.- mm mm Aus-
da 1 da 2 Nr. € Nr. € L z führ.
355 280 3528 1 365.40 3528 2 479.60 1080 378 B
400 110 4011 1 256.90 4011 2 373.10 910 325 B
400 125 4012 1 269.90 4012 2 391.50 925 325 B
400 140 4014 1 286.80 4014 2 414.00 940 325 B
400 160 4016 1 300.10 4016 2 435.90 960 325 B
400 180 4018 1 320.80 4018 2 464.30 980 350 B
400 200 4020 1 340.30 4020 2 494.10 1000 350 B
400 225 4022 1 365.20 4022 2 530.50 1025 350 B
400 250 4025 1 394.60 4025 2 572.50 1050 400 B
400 280 4028 1 426.40 4028 2 619.70 1080 400 B
400 315 4031 1 454.10 4031 2 665.50 1115 400 B
450 110 4511 1 309.30 4511 2 464.20 910 350 B
450 125 4512 1 324.30 4512 2 474.20 925 350 B
450 140 4514 1 341.50 4514 2 496.20 940 350 B
450 160 4516 1 362.00 4516 2 523.50 960 350 B
450 180 4518 1 382.20 4518 2 553.70 980 375 B
450 200 4520 1 405.60 4520 2 589.00 1000 375 B
450 225 4522 1 434.50 4522 2 630.90 1025 375 B
450 250 4525 1 463.50 4525 2 673.90 1050 425 B
450 280 4528 1 500.20 4528 2 723.50 1080 425 B
450 315 4531 1 547.20 4531 2 792.70 1115 425 B
450 355 4535 1 626.70 4535 2 879.10 1155 425 B
500 110 5011 1 441.00 5011 2 615.90 910 375 B
500 125 5012 1 465.70 5012 2 628.50 925 375 B
500 140 5014 1 486.20 5014 2 641.10 940 375 B
500 160 5016 1 512.80 5016 2 676.60 960 375 B
500 180 5018 1 535.90 5018 2 706.50 980 400 B
500 200 5020 1 568.30 5020 2 743.40 1000 400 B
500 225 5022 1 610.30 5022 2 778.90 1025 400 B
Verschwächungsbeiwerte: Ausführung A - gesattelt - 0,6 / Ausführung B - gehalst - 0,75
reduziertes T-Stück mit GFK-Verstärkung auf Anfrage
reduziertes T-Stück mit Gewindestutzen von 1/2“ bis 2 1/2“ / andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factors: A - saddlemounted - 0,60 / B - swept - 0,75
tees with reinforcement and other pressure factors on request - PE-80 / PE-100 production on order, no repurchase
15
T-Stück mit reduziertem Abgangreduced tee welded90°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
fot butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 23 xx xx x
SDR 17 SDR 11
mm mm Art.- Art.- mm mm Aus-
da 1 da 2 Nr. € Nr. € L z führ.
500 250 5025 1 655.60 5025 2 823.60 1050 450 B
500 280 5028 1 685.80 5028 2 878.70 1080 450 B
500 315 5031 1 718.70 5031 2 954.30 1115 450 B
500 355 5035 1 777.30 5035 2 1020.60 1155 450 B
500 400 5040 1 846.00 5040 2 1104.60 1200 450 B
560 110 5611 1 551.60 5611 2 728.40 910 480 B
560 125 5612 1 595.20 5612 2 760.00 925 480 B
560 140 5614 1 627.70 5614 2 791.50 940 480 B
560 160 5616 1 681.80 5616 2 833.50 960 480 B
560 180 5618 1 771.00 5618 2 980.50 980 480 B
560 200 5620 1 799.40 5620 2 1039.60 1000 480 B
560 225 5622 1 815.30 5622 2 1076.60 1025 480 B
560 250 5625 1 880.20 5625 2 1104.40 1050 480 B
560 280 5628 1 917.40 5628 2 1166.10 1080 480 B
560 315 5631 1 962.90 5631 2 1217.50 1115 480 B
560 355 5635 1 1018.00 5635 2 1280.80 1155 480 B
560 400 5640 1 1139.50 5640 2 1384.90 1200 480 B
630 160 6316 1 791.50 6316 2 977.30 960 520 B
630 180 6318 1 888.80 6318 2 1141.40 980 520 B
630 200 6320 1 924.20 6320 2 1208.50 1000 520 B
630 225 6322 1 938.30 6322 2 1251.30 1025 520 B
630 250 6325 1 1012.20 6325 2 1150.20 1050 520 B
630 280 6328 1 1054.40 6328 2 1352.00 1080 520 B
630 315 6331 1 1103.80 6331 2 1410.50 1115 520 B
630 355 6335 1 1167.50 6335 2 1482.30 1155 520 B
630 400 6340 1 1303.40 6340 2 1600.10 1200 520 B
630 450 6345 1 1490.10 6345 2 1800.70 1250 520 B
710 225 7122 1 1423.00 7122 2 2369.70 1025 560 B
710 250 7125 1 1545.50 7125 2 2587.20 1050 560 B
Verschwächungsbeiwerte: Ausführung A - gesattelt - 0,6 / Ausführung B - gehalst - 0,75
reduziertes T-Stück mit GFK-Verstärkung auf Anfrage
reduziertes T-Stück mit Gewindestutzen von 1/2“ bis 2 1/2“ / andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factors: A - saddlemounted - 0,60 / B - swept - 0,75
tees with reinforcement and other pressure factors on request - PE-80 / PE-100 production on order, no repurchase
16
T-Stück mit reduziertem Abgangreduced tee welded
90°
für Stumpf- und Elektromuffenschweissungaus Rohr geschweisst, unverstärkt
fot butt- and electro-fusion-welding - non-reinforced
PE-100 PE-80
PE-100 Artikelnummer4 23 xx xx x
SDR 17 SDR 11
mm mm Art.- Art.- mm mm Aus-
da 1 da 2 Nr. € Nr. € L z führ.
710 280 7128 1 1856.90 7128 2 3139.00 1100 560 B
710 315 7131 1 1958.80 7131 2 3298.20 1200 560 B
710 355 7135 1 2095.00 7135 2 3495.10 1300 560 B
710 400 7140 1 2334.20 7140 2 3774.40 1400 560 B
710 450 7145 1 2564.40 7145 2 4151.00 1550 560 B
710 500 7150 1 2922.70 7150 2 4607.80 1600 560 B
800 225 8022 1 2152.20 8022 2 1025 610 B
800 250 8025 1 2323.90 8025 2 1050 610 B
800 280 8028 1 2741.80 8028 2 1100 610 B
800 315 8031 1 2933.00 8031 2 1200 610 B
800 355 8035 1 3167.70 8035 2 1300 610 B
800 400 8040 1 3484.80 8040 2 1400 610 B
800 450 8045 1 3765.20 8045 2 1550 610 B
800 500 8050 1 4139.60 8050 2 1600 610 B
800 560 8056 1 4636.40 8056 2 1700 610 B
Verschwächungsbeiwerte: Ausführung A - gesattelt - 0,6 / Ausführung B - gehalst - 0,75
reduziertes T-Stück mit GFK-Verstärkung auf Anfrage
reduziertes T-Stück mit Gewindestutzen von 1/2“ bis 2 1/2“ / andere Druckstufen auf Anfrage
PE-80 keine Lagerware, PE-80 / PE-100 Fertigung auf Bestellung, keine Rücknahme
pressure reduction factors: A - saddlemounted - 0,60 / B - swept - 0,75
tees with reinforcement and other pressure factors on request - PE-80 / PE-100 production on order, no repurchase
17
Vorschweissbundstub end
für Stumpfschweissungbis da 315 mm formgespritzt, ab da 355 mm gedreht
for butt-welding, up to od 315 mm injection mouldedfrom od 355 mm machined
PE-100
Artikelnummer4 30 01 xx x
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm Art.- mm Art.- mm Art.- mm mm
da Nr. € h Nr. € h Nr. € h z
20 01 2 4.20 7 50
25 02 2 4.40 9 50
32 03 2 4.90 10 50
40 04 2 5.80 11 50
50 05 1 6.20 12 05 2 7.00 12 50
63 06 1 7.70 14 06 2 8.50 14 50
75 07 1 9.20 16 07 2 10.10 16 50
90 09 1 12.60 17 09 2 14.20 17 80
110 11 3 16.10 18 11 1 16.10 18 11 2 17.50 18 80
125 12 3 19.70 18 12 1 19.70 18 12 2 21.10 25 80
140 14 3 22.60 18 14 1 22.70 18 14 2 24.60 25 80
160 16 3 28.00 18 16 1 28.00 18 16 2 31.30 25 80
180 18 3 40.90 18 18 1 40.90 20 18 2 48.00 30 80
200 20 3 48.70 18 20 1 50.60 24 20 2 52.70 32 100
225 22 3 54.70 18 22 1 57.40 24 22 2 58.70 32 100
250 25 3 77.30 20 25 1 81.20 25 25 2 89.30 35 100
280 28 3 83.00 20 28 1 89.90 25 28 2 97.30 35 100
315 31 3 100.70 20 31 1 109.00 25 31 2 114.70 35 100
355 35 3 158.60 23 35 1 173.80 30 35 2 190.40 40 120
400 40 3 342.10 26 40 1 365.20 33 40 2 392.90 46 120
450 45 3 401.90 33 45 1 431.10 46 45 2 456.40 60 120
500 50 3 489.50 33 50 1 532.40 46 50 2 583.00 60 120
560 56 3 509.90 35 56 1 544.80 50 56 2 665.40 60 120
630 63 3 584.80 35 63 1 649.10 50 63 2 748.20 60 120
710 71 3 1261.60 35 71 1 1345.90 50 71 2 1575.90 67 120
800 80 3 1480.00 36 80 1 1659.30 52 80 2 2100.60 74 120
900 90 3 2124.60 40 90 1 2258.30 55 120
1000 91 3 2539.60 42 91 1 2963.50 60 140
1200 92 3 3424.10 50 92 1 4072.10 70 160
andere Druckstufen auf Anfrage
other pressure factor on request
18
Reduktion zentrischreducer concentric
für Stumpfschweissunggedreht
machined for butt-welding
PE-100
Artikelnummer4 40 xx xx x
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm mm Art.- Art.- Art.- mm
da 1 da 2 Nr. € Nr. € Nr. € L
315 280 3128 3 122.20 3128 1 122.20 3128 2 122.20 230
355 225 3522 3 201.50 3522 1 201.50 3522 2 201.50 140
355 250 3525 3 193.60 3525 1 193.60 3525 2 193.60 130
355 280 3528 3 186.70 3528 1 186.70 3528 2 186.70 120
355 315 3531 3 182.40 3531 1 182.40 3531 2 182.40 110
400 225 4022 3 880.20 4022 1 880.20 4022 2 924.20 160
400 250 4025 3 826.00 4025 1 826.00 4025 2 867.60 150
400 280 4028 3 732.60 4028 1 732.60 4028 2 768.40 140
400 315 4031 3 517.90 4031 1 517.90 4031 2 547.90 120
400 355 4035 3 360.60 4035 1 360.60 4035 2 405.60 110
450 280 4528 3 1045.00 4528 1 1045.00 4528 2 1086.30 160
450 315 4531 3 929.80 4531 1 929.80 4531 2 976.60 140
450 355 4535 3 632.00 4535 1 632.00 4535 2 713.30 130
450 400 4540 3 495.70 4540 1 495.70 4540 2 526.80 120
500 315 5031 3 1329.30 5031 1 1329.30 5031 2 1395.20 170
500 355 5035 3 1062.90 5035 1 1062.90 5035 2 1167.60 150
500 400 5040 3 744.20 5040 1 744.20 5040 2 780.00 140
500 450 5045 3 523.90 5045 1 523.90 5045 2 556.70 120
560 355 5635 3 1817.60 5635 1 1817.60 5635 2 1908.20 170
560 400 5640 3 1378.90 5640 1 1378.90 5640 2 1447.40 160
560 450 5645 3 943.40 5645 1 943.40 5645 2 989.60 140
560 500 5650 3 570.60 5650 1 570.60 5650 2 598.80 130
630 400 6340 3 1823.10 6340 1 1823.10 6340 2 1919.10 190
630 450 6345 3 1528.40 6345 1 1528.40 6345 2 1604.70 170
630 500 6350 3 1124.50 6350 1 1124.90 6350 2 1193.80 150
630 560 6356 3 932.70 6356 1 932.70 6356 2 979.10 130
710 500 7150 3 2230.30 7150 1 2230.30 190
710 560 7156 3 1886.10 7156 1 1886.10 170
710 630 7163 3 1321.70 7163 1 1321.70 140
andere Abmessungen und Druckstufen auf Anfrage
other dimensions and pressure factor on request
19
Reduktion zentrischreducer concentric
für Stumpfschweissunggedreht
machined for butt-welding
PE-100
Artikelnummer4 40 xx xx x
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm mm Art.- Art.- Art.- mm
da 1 da 2 Nr. € Nr. € Nr. € L
800 560 8056 3 2538.60 8056 1 2538.60 200
800 630 8063 3 2140.30 8063 1 2140.30 180
800 710 8071 3 1624.20 8071 1 1624.20 150
900 630 9063 3 3747.00 9063 1 3954.50 220
900 710 9071 3 3246.40 9071 1 3505.70 190
900 800 9080 3 2581.80 9080 1 2849.40 160
1000 710 9171 3 5112.80 9171 1 5425.30 220
1000 800 9180 3 4295.20 9180 1 4562.80 180
1000 900 9190 3 3476.20 9190 1 3726.00 140
1200 1000 9291 3 5060.40 190
andere Abmessungen und Druckstufen auf Anfrage
other dimensions and pressure factor on request
20
Reduktion exzentrischreducer eccentric
für Stumpfschweissunggedreht, Ausführung innen sohlgleich
machined for butt-welding / equal base inside
PE-100
Artikelnummer4 41 xx xx x
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm mm Art.- Art.- Art.- mm
da 1 da 2 Nr. € Nr. € Nr. € L
160 90 1609 3 162.10 1609 1 162.10 1609 2 170.30 140
160 110 1611 3 140.80 1611 1 140.80 1611 2 152.80 120
160 125 1612 3 128.20 1612 1 128.20 1612 2 136.70 110
160 140 1614 3 114.00 1614 1 114.00 1614 2 120.40 100
180 110 1811 3 192.40 1811 1 192.40 1811 2 201.90 140
180 125 1812 3 170.80 1812 1 170.80 1812 2 179.40 130
180 140 1814 3 155.60 1814 1 155.60 1814 2 166.30 120
180 160 1816 3 142.90 1816 1 142.90 1816 2 153.10 100
200 125 2012 3 207.40 2012 1 207.40 2012 2 217.70 150
200 140 2014 3 187.50 2014 1 187.50 2014 2 197.90 130
200 160 2016 3 165.20 2016 1 165.20 2016 2 175.80 120
200 180 2018 3 155.80 2018 1 155.80 2018 2 166.30 100
225 140 2214 3 260.30 2214 1 260.30 2214 2 273.60 160
225 160 2216 3 243.60 2216 1 243.60 2216 2 253.10 140
225 180 2218 3 212.60 2218 1 212.60 2218 2 220.30 120
225 200 2220 3 191.00 2220 1 191.00 2220 2 200.50 110
250 160 2516 3 309.00 2516 1 309.00 2516 2 324.30 170
250 180 2518 3 298.10 2518 1 298.10 2518 2 312.60 150
250 200 2520 3 272.30 2520 1 272.30 2520 2 283.10 130
250 225 2522 3 226.80 2522 1 226.80 2522 2 244.00 110
280 180 2818 3 347.20 2818 1 347.20 2818 2 364.70 180
280 200 2820 3 319.30 2820 1 319.30 2820 2 325.60 160
280 225 2822 3 287.50 2822 1 287.50 2822 2 296.40 140
280 250 2825 3 246.50 2825 1 246.50 2825 2 262.80 120
315 200 3120 3 384.50 3120 1 384.50 3120 2 403.70 190
315 225 3122 3 340.30 3122 1 340.30 3122 2 356.90 170
315 250 3125 3 297.80 3125 1 297.80 3125 2 309.40 150
315 280 3128 3 270.50 3128 1 270.50 3128 2 280.10 130
355 225 3522 3 471.10 3522 1 471.10 3522 2 494.80 210
andere Abmessungen und Druckstufen auf Anfrage
PP auf Anfrage
Fertigung auf Bestellung, keine Rücknahme
other dimensions and pressure factor on request
PP on request
production on order, no repurchase
21
Reduktion exzentrischreducer eccentric
für Stumpfschweissunggedreht, Ausführung innen sohlgleich
machined for butt-welding / equal base inside
PE-100
Artikelnummer4 41 xx xx x
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm mm Art.- Art.- Art.- mm
da 1 da 2 Nr. € Nr. € Nr. € L
355 250 3525 3 400.60 3525 1 400.60 3525 2 415.90 190
355 280 3528 3 351.10 3528 1 351.10 3528 2 367.50 150
355 315 3531 3 326.80 3531 1 326.80 3531 2 342.80 130
400 250 4025 3 1078.60 4025 1 1126.70 4025 2 1132.70 230
400 280 4028 3 950.80 4028 1 991.40 4028 2 1004.10 200
400 315 4031 3 767.90 4031 1 803.20 4031 2 810.50 170
400 355 4035 3 588.00 4035 1 613.60 4035 2 644.10 140
450 280 4528 3 1673.50 4528 1 1748.70 4528 2 1772.20 250
450 315 4531 3 1460.10 4531 1 1460.10 4531 2 1532.00 220
450 355 4535 3 1091.90 4535 1 1141.70 4535 2 1198.60 190
450 400 4540 3 802.50 4540 1 838.00 4540 2 879.40 150
500 280 5028 3 2379.90 5028 1 2379.90 5028 2 2493.60 290
500 315 5031 3 2095.20 5031 1 2095.20 5031 2 2130.60 260
500 355 5035 3 1623.10 5035 1 1623.10 5035 2 1707.90 230
500 400 5040 3 1206.30 5040 1 1260.50 5040 2 1323.70 200
500 450 5045 3 888.80 5045 1 929.80 5045 2 986.80 160
560 400 5640 3 1673.60 5640 1 1673.60 5640 2 1778.40 250
560 450 5645 3 1396.90 5645 1 1460.10 5645 2 1539.30 210
560 500 5650 3 1059.30 5650 1 1106.90 5650 2 1180.10 170
630 450 6345 3 2602.70 6345 1 2602.70 6345 2 2732.60 270
630 500 6350 3 2204.10 6350 1 2303.90 6350 2 2419.20 230
630 560 6356 3 1498.10 6356 1 1565.50 6356 2 1643.70 180
710 560 7156 3 2416.70 7156 1 2527.10 240
710 630 7163 3 1784.90 7163 1 1865.20 180
800 630 8063 3 2726.30 8063 1 2986.70 270
800 710 8071 3 2070.60 8071 1 2163.70 190
900 710 9071 3 4857.80 9071 1 5078.30 2820
900 800 9080 3 2784.00 9080 1 3036.10 210
1000 800 9180 3 6282.90 9180 1 6567.60 300
andere Abmessungen und Druckstufen auf Anfrage
PP auf Anfrage
Fertigung auf Bestellung, keine Rücknahme
other dimensions and pressure factor on request
PP on request
production on order, no repurchase
22
Reduktion exzentrischreducer eccentric
für Stumpfschweissunggedreht, Ausführung innen sohlgleich
machined for butt-welding / equal base inside
PE-100
Artikelnummer4 41 xx xx x
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm mm Art.- Art.- Art.- mm
da 1 da 2 Nr. € Nr. € Nr. € L
1000 900 9190 3 4212.30 9190 1 4596.30 220
1200 1000 9291 3 7709.00 290
andere Abmessungen und Druckstufen auf Anfrage
PP auf Anfrage
Fertigung auf Bestellung, keine Rücknahme
other dimensions and pressure factor on request
PP on request
production on order, no repurchase
23
Rohrendkappeend cap machined
für Stumpfschweissunggedreht
for butt-welding
PE-100
Artikelnummer4 45 01 xx x
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm Art.- Art.- Art.- mm
da Nr. € Nr. € Nr. € L*
125 12 3 50.50 12 1 50.50 12 2 55.20 30/35/40
140 14 3 52.50 14 1 52.50 14 2 63.80 35/35/40
160 16 3 73.60 16 1 73.60 16 2 82.80 35/40/45
180 18 3 81.60 18 1 81.60 18 2 94.10 40/45/45
200 20 3 91.90 20 1 89.90 20 2 102.00 40/45/50
225 22 3 107.30 22 1 110.60 22 2 115.70 45/50/55
250 25 3 123.10 25 1 142.00 25 2 154.20 45/55/60
280 28 3 165.80 28 1 203.00 28 2 226.00 50/60/65
315 31 3 192.70 31 1 213.60 31 2 234.60 55/65/70
355 35 3 255.60 35 1 308.00 35 2 381.30 60/70/80
400 40 3 328.90 40 1 391.80 40 2 446.20 65/75/85
450 45 3 498.60 45 1 561.50 45 2 683.80 70/85/95
500 50 3 716.10 50 1 782.70 50 2 849.20 80/90/105
560 56 3 1591.80 56 1 1815.40 56 2 1905.40 85/100/115
630 63 3 1768.30 63 1 2072.40 63 2 2189.10 95/110/125
710 71 3 4345.50 71 1 4538.20 110/120
800 80 3 4754.60 80 1 4971.00 120/130
900 90 3 4921.30 90 1 5222.00 130/140
1000 91 3 5284.30 140
andere Abmessungen und Druckstufen auf Anfrage
* = Höhenmaß für Druckstufe SDR 33 / SDR 17,6 / SDR 11 bzw. SDR 33 / SDR 17,6
Fertigung auf Bestellung, keine Rücknahme
other dimensions and pressure factor on request
* = height for pressure factor SDR 33 / SDR 17,6 / SDR 11 and SDR 33 / SDR 17,6
production on order, no repurchase
24
Vorschweissbundstub end
für Stumpf- und Elektromuffenschweissungbis da 315 mm formgespritzt, ab da 355 mm gedrehtmit Rohr verlängert
for butt- and electro-fusion-weldinginjection moulded long type, from od 355 mm machined extended with pipe
PE-100
PE-100 Artikelnummer4 30 02 xx x
SDR 17 SDR 11
mm Art.- mm Art.- mm mm
da Nr. € h Nr. € h z
20 01 2 5.60 7 88
25 02 2 5.80 9 86
32 03 2 7.00 10 89
40 04 2 8.00 11 98
50 05 2 10.40 12 101
63 06 1 12.50 14 06 2 12.50 14 118
75 07 1 15.50 16 07 2 15.50 16 125
90 09 1 20.40 17 09 2 20.50 17 139
110 11 1 25.30 18 11 2 25.60 18 137
125 12 1 31.60 18 12 2 31.60 25 175
140 14 1 40.60 18 14 2 40.60 25 180
160 16 1 45.80 18 16 2 45.20 25 180
180 18 1 72.00 20 18 2 71.40 30 172
200 20 1 81.20 24 20 2 81.60 32 180
225 22 1 87.70 24 22 2 87.70 32 180
250 25 1 106.20 25 25 2 135.00 35 274
280 28 1 160.60 25 28 2 178.20 35 377
315 31 1 210.60 25 31 2 226.30 35 382
355 35 1 364.30 30 35 2 391.60 40 400
400 40 1 643.00 33 40 2 691.00 46 400
450 45 1 666.30 46 45 2 740.90 60 400
500 50 1 866.60 46 50 2 982.80 60 400
560 56 1 981.60 50 56 2 1016.20 60 400
630 63 1 1230.90 50 63 2 1432.90 60 400
710 71 1 2289.90 50 71 2 2755.30 67 400
800 80 1 2760.90 52 80 2 3374.10 74 400
900 90 1 3671.30 55 400
1000 91 1 4572.20 60 400
1200 92 1 6574.60 70 400
andere Abmessungen und Druckstufen auf Anfrage
bis da = 315 mm Bild links, ab da = 355 mm Bild rechts
other dimensions and pressure factor on request
25
Reduktion zentrischreducer concentric
für Stumpf- und Elektromuffenschweissungbis da 225 mm formgespritzt, ab da 250 mm gedrehtmit Rohr verlängert
long type, for butt- and electro-fusion-weldingup to od 225 mm injection moulded / from od 250 mm machined, extended with pipe
PE-100
PE-100 Artikelnummer4 42 xx xx x
SDR 17 SDR 11
mm mm Art.- Art.- mm
da 1 da 2 Nr. € Nr. € L
180 160 1816 1 98.00 1816 2 98.00 276
200 125 2012 1 113.30 2012 2 113.30 275
200 160 2016 1 113.30 2016 2 113.30 275
225 110 2211 1 182.10 2211 2 182.10 305
225 160 2216 1 182.10 2216 2 182.10 305
225 180 2218 1 165.50 2218 2 165.50 305
250 160 2516 1 409.70 2516 2 458.10 314
250 180 2518 1 411.60 2518 2 460.90 330
250 200 2520 1 412.80 2520 2 464.20 330
250 225 2522 1 420.60 2522 2 469.80 330
280 250 2825 1 519.60 2825 2 572.70 355
315 200 3120 1 502.90 3120 2 553.30 375
315 225 3122 1 509.30 3122 2 561.10 375
315 250 3125 1 528.90 3125 2 576.50 375
315 280 3128 1 546.60 3128 2 631.50 730
355 225 3522 1 612.50 3522 2 702.20 640
355 250 3525 1 634.10 3525 2 728.00 630
355 280 3528 1 662.40 3528 2 743.40 620
355 315 3531 1 701.00 3531 2 802.60 610
400 225 4022 1 1259.40 4022 2 1382.00 660
400 250 4025 1 1237.30 4025 2 1361.50 650
400 280 4028 1 1220.80 4028 2 1354.90 640
400 315 4031 1 1053.00 4031 2 1191.00 620
400 355 4035 1 934.30 4035 2 1095.00 610
450 280 4528 1 1610.30 4528 2 1765.40 760
450 315 4531 1 1538.50 4531 2 1707.10 740
450 355 4535 1 1275.10 4535 2 1495.30 730
450 400 4540 1 1181.10 4540 2 1349.90 720
500 315 5031 1 2095.20 5031 2 2316.00 770
andere Abmessungen und Druckstufen auf Anfrage
bis da 1 = 225 mm Bild links, ab da 1 = 250 mm Bild rechts
other dimensions and pressure factor on request
26
Reduktion zentrischreducer concentric
für Stumpf- und Elektromuffenschweissunggedreht, mit Rohr verlängert
long type, for butt- and electro-fusion-weldingmachined, extended with pipe
PE-100
PE-100 Artikelnummer4 42 xx xx x
SDR 17 SDR 11
mm mm Art.- Art.- mm
da 1 da 2 Nr. € Nr. € L
500 355 5035 1 1920.40 5035 2 2183.70 750
500 400 5040 1 1644.50 5040 2 1851.70 740
500 450 5045 1 1501.40 5045 2 1731.50 720
560 355 5635 1 2846.50 5635 2 3138.60 770
560 400 5640 1 2433.60 5640 2 2742.10 760
560 450 5645 1 2079.50 5645 2 2378.60 740
560 500 5650 1 1882.50 5650 2 2185.20 730
630 400 6340 1 3130.80 6340 2 3505.50 790
630 450 6345 1 2943.20 6345 2 3293.80 770
630 500 6350 1 2694.10 6350 2 3080.20 750
630 560 6356 1 2690.40 6356 2 3080.00 730
710 500 7150 1 4095.20 790
710 560 7156 1 3986.90 770
710 630 7163 1 3636.80 740
800 560 8056 1 4810.80 800
800 630 8063 1 4669.90 780
800 710 8071 1 4496.70 750
900 630 9063 1 6741.30 820
900 710 9071 1 6721.20 790
900 800 9080 1 6279.20 760
1000 710 9171 1 8940.90 820
1000 800 9180 1 8292.80 780
1000 900 9190 1 7713.20 740
andere Abmessungen und Druckstufen auf Anfrage
other dimensions and pressure factor on request
27
Reduktion exzentrischreducer eccentric
für Stumpf- und Elektromuffenschweissunggedreht, Ausführung innen sohlgleich
long type, for butt- and electro-fusion-weldingequal base inside
PE-100
Artikelnummer4 41 xx xx x - RV
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm mm Art.- Art.- Art.- mm
da 1 da 2 Nr. € Nr. € Nr. € L
160 90 1609 3 293.80 1609 1 310.90 1609 2 346.60 540
160 110 1611 3 278.20 1611 1 295.40 1611 2 333.70 520
160 125 1612 3 269.00 1612 1 287.30 1612 2 325.60 510
160 140 1614 3 259.40 1614 1 277.70 1614 2 320.80 500
180 110 1811 3 333.30 1811 1 357.30 1811 2 398.80 540
180 125 1812 3 315.00 1812 1 340.20 1812 2 384.30 530
180 140 1814 3 304.40 1814 1 329.60 1814 2 382.70 520
180 160 1816 3 295.10 1816 1 324.90 1816 2 377.40 500
200 125 2012 3 364.30 2012 1 387.20 2012 2 439.80 550
200 140 2014 3 348.90 2014 1 371.80 2014 2 431.50 530
200 160 2016 3 330.00 2016 1 357.50 2016 2 417.40 520
200 180 2018 3 324.10 2018 1 358.40 2018 2 423.90 500
225 140 2214 3 428.60 2214 1 473.30 2214 2 536.90 560
225 160 2216 3 415.30 2216 1 464.60 2216 2 524.40 540
225 180 2218 3 387.70 2218 1 443.80 2218 2 507.60 520
225 200 2220 3 378.70 2220 1 432.50 2220 2 505.00 510
250 160 2516 3 503.60 2516 1 559.70 2516 2 633.40 570
250 180 2518 3 496.20 2518 1 559.10 2518 2 637.80 550
250 200 2520 3 483.00 2520 1 543.70 2520 2 625.40 530
250 225 2522 3 444.30 2522 1 526.70 2522 2 616.00 510
280 180 2818 3 573.90 2818 1 639.10 2818 2 728.80 580
280 200 2820 3 558.50 2820 1 621.50 2820 2 706.80 560
280 225 2822 3 533.60 2822 1 618.30 2822 2 707.40 540
280 250 2825 3 515.50 2825 1 607.10 2825 2 711.60 520
315 200 3120 3 641.00 3120 1 726.80 3120 2 823.80 590
315 225 3122 3 603.70 3122 1 711.30 3122 2 806.90 570
315 250 3125 3 584.00 3125 1 698.40 3125 2 797.10 550
315 280 3128 3 585.30 3128 1 702.10 3128 2 806.70 530
355 225 3522 3 779.00 3522 1 878.60 3522 2 985.90 610
andere Abmessungen und Druckstufen auf Anfrage
PP auf Anfrage
Fertigung auf Bestellung, keine Rücknahme
other dimensions and pressure factor on request
PP on request
production on order, no repurchase
28
Reduktion exzentrischreducer eccentric
für Stumpf- und Elektromuffenschweissunggedreht, Ausführung innen sohlgleich
long type, for butt- and electro-fusion-weldingequal base inside
PE-100
Artikelnummer4 41 xx xx x - RV
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm mm Art.- Art.- Art.- mm
da 1 da 2 Nr. € Nr. € Nr. € L
355 250 3525 3 731.40 3525 1 837.90 3525 2 944.80 590
355 280 3528 3 711.70 3528 1 819.30 3528 2 935.30 550
355 315 3531 3 703.50 3531 1 835.10 3531 2 949.50 30
400 250 4025 3 1435.80 4025 1 1593.80 4025 2 1722.20 630
400 280 4028 3 1337.70 4028 1 1489.40 4028 2 1632.60 600
400 315 4031 3 1170.90 4031 1 1341.20 4031 2 1477.90 570
400 355 4035 3 1035.60 4035 1 1188.30 4035 2 1352.70 540
450 280 4528 3 2094.80 4528 1 2330.20 4528 2 2494.50 650
450 315 4531 3 1897.40 4531 1 2081.70 4531 2 2293.30 620
450 355 4535 3 1573.90 4535 1 1800.00 4535 2 2001.10 590
450 400 4540 3 1310.80 4540 1 1524.90 4540 2 1742.60 550
500 280 5028 3 2887.10 5028 1 3126.30 5028 2 3410.60 690
500 315 5031 3 2618.40 5031 1 2881.70 5031 2 3086.50 660
500 355 5035 3 2190.90 5035 1 2446.20 5035 2 2705.00 630
500 400 5040 3 1800.40 5040 1 2112.30 5040 2 2381.50 600
500 450 5045 3 1517.30 5045 1 1866.30 5045 2 2139.60 560
560 400 5640 3 2449.80 5640 1 2714.20 5640 2 3048.00 650
560 450 5645 3 2207.40 5645 1 2585.40 5645 2 2903.90 610
560 500 5650 3 1955.70 5650 1 2397.10 5650 2 2738.10 570
630 450 6345 3 3639.90 6345 1 3978.80 6345 2 4392.60 670
630 500 6350 3 3327.10 6350 1 3844.80 6350 2 4272.60 630
630 560 6356 3 2803.20 6356 1 3295.30 6356 2 3708.90 580
710 560 7156 3 4078.90 7156 1 4624.40 640
710 630 7163 3 3673.80 7163 1 4213.20 580
800 630 8063 3 4753.80 8063 1 5541.90 670
800 710 8071 3 4455.20 8071 1 5086.30 590
900 710 9071 3 7462.30 9071 1 8236.80 620
900 800 9080 3 5527.00 9080 1 6401.80 610
1000 800 9180 3 9178.10 9180 1 10181.70 700
andere Abmessungen und Druckstufen auf Anfrage
PP auf Anfrage
Fertigung auf Bestellung, keine Rücknahme
other dimensions and pressure factor on request
PP on request
production on order, no repurchase
29
Reduktion exzentrischreducer eccentric
für Stumpf- und Elektromuffenschweissunggedreht, Ausführung innen sohlgleich
long type, for butt- and electro-fusion-weldingequal base inside
PE-100
Artikelnummer4 41 xx xx x - RV
SDR 33 SDR 17 / SDR 17,6 SDR 11
mm mm Art.- Art.- Art.- mm
da 1 da 2 Nr. € Nr. € Nr. € L
1000 900 9190 3 7326.10 9190 1 8446.20 620
1200 1000 9291 3 11248.70 690
andere Abmessungen und Druckstufen auf Anfrage
PP auf Anfrage
Fertigung auf Bestellung, keine Rücknahme
other dimensions and pressure factor on request
PP on request
production on order, no repurchase
30
Rohrendkappeend cap
für Stumpf- und Elektromuffenschweissungbis da 250 mm formgespritzt, ab da 280 mm gedrehtmit Rohr verlängert
for butt- and electro-fusion-weldingup to od 250 mm injection moulded / from od 280 mm machined, extended with pipe
PE-100
PE-100 Artikelnummer4 45 02 xx x
SDR 17 SDR 11
mm Art.- Art.- mm
da Nr. € Nr. € L
20 01 2 5.80 45
25 02 2 6.20 48
32 03 2 7.90 54
40 04 2 9.70 61
50 05 2 12.50 71
63 06 1 16.60 06 2 16.70 84
75 07 1 31.10 07 2 30.80 91
90 09 1 37.50 09 2 37.50 107
110 11 1 47.90 11 2 48.00 124
125 12 1 54.70 12 2 54.60 132
140 14 1 68.60 14 2 69.10 144
160 16 1 72.10 16 2 72.40 154
180 18 1 99.60 18 2 99.60 191
200 20 1 124.00 20 2 124.30 181
225 22 1 148.10 22 2 148.10 211
250 25 1 159.40 25 2 170.80 230
280 28 1 236.90 28 2 236.90 257
315 31 1 324.30 31 2 324.30 262
355 35 1 402.60 35 2 489.50 270/280*
400 40 1 487.20 40 2 573.90 275/285*
450 45 1 672.90 45 2 823.00 285/295*
500 50 1 949.50 50 2 1066.50 290/305*
560 56 1 1922.70 56 2 2175.30 300/315*
630 63 1 2272.50 63 2 2572.70 310/325*
710 71 1 5408.40 320
800 80 1 5998.80 330
900 90 1 6439.70 340
andere Abmessungen und Druckstufen auf Anfrage
* = Höhenmaß für Druckstufe SDR 17 / SDR 11
bis da = 250 mm Bild links, ab da = 280 mm Bild rechts
other dimensions and pressure factor on request
* = height for pressure factor SDR 17 / SDR 11
31