Post on 15-Mar-2020
HP kW Flange ∅ Internal (mm) Εxternal (mm)
Inlet (mm) Outlet Flange Air flow
m3/h
Voltage
V
0,5 0,37 200 205 x 245 255 x 295 2.500 230/400
1,0 0,75 250 225 x 345 275 x 395 5.000 230/400
1,5 1,10 250 255 x 345 305 x 395 6.000 230/400
2,0 1,50 300 275 x 405 325 x 455 8.000 230
2,0 1,50 300 275 x 405 325 x 455 8.000 400
3,0 2,20 300 275 x 405 325 x 455 9.000 400
3,0 2,20 300 275 x 405 325 x 455 9.000 230
3,0 2,20 350 325 x 405 375 x 455 10.000 400
4,0 3,00 350 325 x 455 375 x 505 11.000 400
Dimensions 1450 RPM
Inlet Flange
cm
Power
HP
Height
cm
Length
cm
Width
cm
∅ 20 0,5 46 55 47 17 41 28
∅ 25 1,0 57 70 52 23 47 32
∅ 25 1,5 57 70 55 23 49 32
∅ 30 2,0 68 82 62 26 57 40
∅ 30 3,0 68 82 62 26 57 40
∅ 35 3,0 68 82 70 24 61 40
∅ 35 4,0 76 90 70 29 61 44
L
Hο
cm
Lο
cm
Wο
cm
H
Ho
LoW
Wo
Caution: 380V (three phase) motors should be protected
Power
Visoko kvalitetan elektromotor specijalno projektovan za ventilatore, montiran na antivibracione gumene nosače; zaštita motora IP55-Klase F.
MODEL: JHP
****
Modeli uvek dostupni na lageru*
1
Centrifugalni ventilatori sa jednim usisom i kutaloidnim lopaticamaCentrifugal Single Inlet Centrifugal Fans With Sparse Wide Scooped Blades
Tehničke karakteristike / Technical Characteristics 1.450 o/min / rpm
DIMENZIJE / DIMESNIONS
Upozorenje: Za trofazne ventilatore obavezna je ugradnja termičke zaštite
Caution: Thermal protection must be instaled for three phase modelsHigh quality electric motor specially manufactured for fans, mounted on anti-vibration rubber feet; protection IP55-Class F.
■ Pogodni su za industrijske hale, restorane, profesionalne kuhinje■ Ventilaciono kolo, sa kutaloidnim lopaticama, pogodno je za čišćenje (iliodržavanje) i sprečavanje nagomilavanja masnoće. Ventilatori mogu biti izrađeni od visokokvalitetnog pocinkovanog čeličnog lima ili od INOX 304.■ Visoko kvalitetan elektromotor projektovan specijalno za ventilatore,montiran je na antivibracione gumene nosače; zaštita motora IP55-Klase F. Napajanje: 220V-50Hz ili 380V-50Hz.■ Svi ventilatori su standardno ofarbani u RAL boju. Postoji mogućnostmontaže u aerokutiji.■ Regulisanje monofaznih modela se vrši reostatom (model 0,5 reostatom
REM 5: modeli 1,0; 1,5 i 2,0 reostatom REM 10). Za sve trofazne modele obavezna je regulacija frekventnim regulatorom.
■ Za trofazne ventilatore obavezna je ugradnja termičke zaštite.
■ Suitable for industrial applications, restaurants, commercial kitchens.■ Impeller with sparse wide scooped blades for easy cleaning and preventionof oily residue build-up. Fans made of high quality galvanised steel sheet or made in INOX 304.■ High quality electric motor specially manufactured for fans, mounted onanti-vibration rubber feet; protection IP55-Class F. Input voltage: 220V-50Hz or 380V-50Hz.■ Painted in RAL color as standard. Can be delivered within fan section.■ Single phase models regulation with speed controller (model 0,5 with
REM 5, models 1,0; 1,5 and 2,0 with REM 10). All three phase modelsmust be driven with frequency inverter.
■ Thermal protection must be installed for three phase models.
MODEL: JHP (1.450 o/min / rpm)
R 0 R 90 R 270
L 270L 90L 0
Gledano sa strane motora. /Viewed from motor side of fan.
18 2
SIVAR 2010 001-030 UK.qxd 6/15/11 2:53 PM Page 18
MODEL: JHP (1.450 o/min / rpm)
RADNE KRIVE / PERFORMANCE CURVES
Centrifugalni ventilatori sa jednim usisom i kutaloidnim lopaticamaCentrifugal Single Inlet Centrifugal Fans With Sparse Wide Scooped Blades
f 2000,5 HP 1.450 o/min rpm f 2501 HP 1.450 o/min rpm
f 3001,5 HP 1.450 o/min rpm f 3002 HP 1.450 o/min rpm
f 3003 HP 1.450 o/min rpm f 3504 HP 1.450 o/min rpm
Tehničke karakteristike / Technical Characteristics 950 o/min / rpm
Visoko kvalitetan elektromotor specijalno projektovan za ventilatore, montiran na antivibracione gumene nosače; zaštita motora IP55-Klase F.High quality electric motor specially manufactured for fans, mounted on anti-vibration rubber feet; protection IP55-Class F.
■ Pogodni su za industrijske hale, restorane, profesionalne kuhinje■ Ventilaciono kolo, sa kutaloidnim lopaticama, pogodno je za čišćenje (iliodržavanje) i sprečavanje nagomilavanja masnoće. Ventilatori mogu biti izrađeni od visokokvalitetnog pocinkovanog čeličnog lima ili od INOX 304.■ Visoko kvalitetan elektromotor projektovan specijalno za ventilatore,montiran je na antivibracione gumene nosače; zaštita motora IP55-Klase F. Napajanje: 220V-50Hz ili 380V-50Hz.■ Svi ventilatori su standardno ofarbani u RAL boju. Postoji mogućnostmontaže u aerokutiji.■ Regulisanje monofaznih modela se vrši reostatom (model 0,5 reostatom
REM 5: modeli 1,0; 1,5 i 2,0 reostatom REM 10). Za sve trofazne modele obavezna je regulacija frekventnim regulatorom.
■ Za trofazne ventilatore obavezna je ugradnja termičke zaštite.
■ Suitable for industrial applications, restaurants, commercial kitchens.■ Impeller with sparse wide scooped blades for easy cleaning and preventionof oily residue build-up. Fans made of high quality galvanised steel sheet or made in INOX 304.■ High quality electric motor specially manufactured for fans, mounted onanti-vibration rubber feet; protection IP55-Class F. Input voltage: 220V-50Hz or 380V-50Hz.■ Painted in RAL color as standard. Can be delivered within fan section.■ Single phase models regulation with speed controller (model 0,5 with REM
5, models 1,0; 1,5 and 2,0 with REM 10). All three phase models must bedriven with frequency inverter.
■ Thermal protection must be installed for three phase models.
MODEL: JHP (950 o/min / rpm)
Centrifugalni ventilatori sa jednim usisom i kutaloidnim lopaticamaCentrifugal Single Inlet Centrifugal Fans With Sparse Wide Scooped Blades
3
R 0 R 90 R 270
L 270L 90L 0
Gledano sa strane motora. /Viewed from motor side of fan.
16
Single InletCentrifugal Fans
V.A.T. not included
900 Rpm Single Inlet Centrifugal Fans■ Low, medium pressure.■ High quality, advanced technology■ Housing made of galvanized pressed steel for fans
with Inlet flange up to diameter d = 350mm.■ Housing made of pressed steel sheet protected
by electrostatic, epoxy paint for fans with Inlet Flange diameter d = 350mm.
■ Impeller with sparse wide scooped blades for easy cleaning and prevention of oily residue buildup.
■ Optional fan mounting inside a Fan Section, page 25.■ Speed controllers, pages 186-202.■ Performance Curves for all fans on page 19.
APPLICATION: Suitable for industrial applications,commercial kitchens, steak houses etc.
Caution: 380V (three phase) motors should be protectedby thermal contacts.
Technical Characteristics 900 RPM
HP kW
Inlet (mm)Flange ∅
Outlet FlangeInternal mm External mm
Air Flowm3/h
VoltageVOLT
Price
0,5 0,37 250 225 x 345 275 x 395 4.000 230/400 f 251,001,0 0,75 300 275 x 405 325 x 455 6.000 230/400 f 361,001,5 1,10 300 275 x 405 325 x 455 8.000 230/400 f 451,002,0 1,50 350 325 x 455 375 x 505 10.000 400 f 543,002,0 1,50 350 325 x 455 375 x 505 10.000 230 f 579,003,0 2,20 350 325 x 455 375 x 505 11.000 400 f 663,004,0 3,00 450 570 x 440 630 x 500 15.000 400 f 1.147,005,5 4,00 450 570 x 440 630 x 500 16.000 400 f 1.375,00
Dimensions 900 RPMInlet Flange
cmPower
HP
Heightcm
Lengthcm
Widthcm
∅ 25 0,5 57 70 52 23 47 32∅ 30 1 68 82 62 26 57 40∅ 30 1,5 68 82 62 26 57 40∅ 35 2 76 90 70 29 61 44∅ 35 3 76 90 70 29 61 44∅ 45 4 100 90 99 30 79 51
R 0ο R 90ο R 270ο L 0ο L 90ο L 270ο
Hοcm
Lοcm
Wοcm
Power
For the manufacturing of our fans, we exclusively use
SIEMENS high efficiency electrical motors, IP 55 protection,
class F.
WWo
LLo
Ho
H
SIVAR 2010 001-030 UK.qxd 6/15/11 2:53 PM Page 16
MODEL: JHP (900 rpm)
MODEL: JHP
17
Single InletCentrifugal Fans
V.A.T. not included
Accessories
page 30 page 30 page 311 page 32 page 34
page 30
page 34
page 30page 53pages 187-188page 186
Thermal protection relay■ Motor protection.■ High life time operation.■ Cooperation with the SIRIUS
relays.■ More info at pages 181-184.
Overload & Thermal protectionswitch
■ Overload and Thermal protectionunit with onboard ON/OFF switch.
■ Cooperation with all the relays.■ Easy installation and electrical
wiring.■ Easy installation of auxiliary switch
block.■ More info at pages 181-184.
Soft-Starters■ Soft start of electric motor.■ Small unit so it doesn’t take a lot
of space.■ Low price compared with a D/Y
automation switch.■ Available units in many motor
powers.■ More info at pages 181-184.
Start – Stop relay unit■ Built in relay unit.■ Available relays in two voltage
230/400V.■ Unit with a change over rotation
switch.■ Easy and fast installation.■ More info at pages 181-184.
Speed Controlers - Inverters■ Absolutely smooth operation for the electric motor.■ Energy saving up to 60%.■ Over speed operation (edge function ).■ 230V input voltage inverter for controlling up to 4 HP in three phase motors.■ 380V input voltage inverter for any horsepower rating.■ Speed controllers, pages 186-202.
NEW !NEW !
NEW !NEW !
SIVAR 2010 001-030 UK.qxd 6/15/11 2:53 PM Page 17
Sve cene su date u cenovniku:J.1. JAKKA - Ventilacija
316
Single InletCentrifugal Fans
V.A.T. not included
900 Rpm Single Inlet Centrifugal Fans■ Low, medium pressure.■ High quality, advanced technology■ Housing made of galvanized pressed steel for fans
with Inlet flange up to diameter d = 350mm.■ Housing made of pressed steel sheet protected
by electrostatic, epoxy paint for fans with Inlet Flange diameter d = 350mm.
■ Impeller with sparse wide scooped blades for easy cleaning and prevention of oily residue buildup.
■ Optional fan mounting inside a Fan Section, page 25.■ Speed controllers, pages 186-202.■ Performance Curves for all fans on page 19.
APPLICATION: Suitable for industrial applications,commercial kitchens, steak houses etc.
Caution: 380V (three phase) motors should be protectedby thermal contacts.
Technical Characteristics 900 RPM
HP kW
Inlet (mm)Flange ∅
Outlet FlangeInternal mm External mm
Air Flowm3/h
VoltageVOLT
Price
0,5 0,37 250 225 x 345 275 x 395 4.000 230/400 f 251,001,0 0,75 300 275 x 405 325 x 455 6.000 230/400 f 361,001,5 1,10 300 275 x 405 325 x 455 8.000 230/400 f 451,002,0 1,50 350 325 x 455 375 x 505 10.000 400 f 543,002,0 1,50 350 325 x 455 375 x 505 10.000 230 f 579,003,0 2,20 350 325 x 455 375 x 505 11.000 400 f 663,004,0 3,00 450 570 x 440 630 x 500 15.000 400 f 1.147,005,5 4,00 450 570 x 440 630 x 500 16.000 400 f 1.375,00
Dimensions 900 RPMInlet Flange
cmPower
HP
Heightcm
Lengthcm
Widthcm
∅ 25 0,5 57 70 52 23 47 32∅ 30 1 68 82 62 26 57 40∅ 30 1,5 68 82 62 26 57 40∅ 35 2 76 90 70 29 61 44∅ 35 3 76 90 70 29 61 44∅ 45 4 100 90 99 30 79 51
R 0ο R 90ο R 270ο L 0ο L 90ο L 270ο
Hοcm
Lοcm
Wοcm
Power
For the manufacturing of our fans, we exclusively use
SIEMENS high efficiency electrical motors, IP 55 protection,
class F.
WWo
LLo
Ho
H
SIVAR 2010 001-030 UK.qxd 6/15/11 2:53 PM Page 16
19V.A.T. not included
R S T
R S T
L N L N
3phase connection diagrams
1phase connection diagrams
SIVAR 2010 001-030 UK.qxd 6/15/11 2:54 PM Page 19
MODEL: JHP (950 o/min / rpm)
4
RADNE KRIVE /PERFORMANCE CURVES
Dijagram za trofazno povezivanje / 3phase connection diagram
Dijagram za monofazno povezivanje / 1phase connection diagram
Y
Desna rotacija / Right rotation Leva rotacija / Left rotationCene pronadjite u cenovniku / Prices are in pricelistJ.1. JAKKA - Ventilacija
Centrifugalni ventilatori sa jednim usisom i kutaloidnim lopaticamaSingle Inlet Centrifugal Fans With Sparse Wide Scooped Blades
veza / connectionDelta
f 3502 HP 950 o/min rpm
f 4504 HP 950 o/min rpm
f 3001 HP 950 o/min rpmf 2500,5 HP 950 o/min rpm
f 3001,5 HP 950 o/min rpm
f 3503 HP 950 o/min rpm
veza / connection