Transcript of ammonia decomposition over Ru/LaAl2O3 catalyst
- 1. Synthesis, Characterization, and Catalytic Activity of
Ru/La-Al2O3 for Ammonia Dehydrogenation Dan Bi Chung Advisor: Prof.
Kwan-Young Lee Dr. Chang Won Yoon Fuel cell Research Center, Korea
Institute of Science and Technology, Chemical and Biological
Engineering, Korea University, 2014.12.02
- 2. INDEX Introduction Research background Literature precedents
Motivation Experimental Catalyst preparation Characterization
Results and discussions Catalytic dehydrogenation of ammonia over
the Ru(1wt%)/La(x)-Al2O3 Structured catalysts for industrial
application Conclusions
- 3. 1 Introduction
- 4. Exhaust of fossil fuel and global warming Need for
sustainable energy source Solar, Wind, Biomass, Hydrogen Picture
from movie The earth Picture from World Nature Organization4
- 5. Methane Wind Solar Electrolysis Reformer Water Oxygen
Hydrogen Storage Hydrogen Fuel cell Hydrogen economy Hydrogen
economy 5 Renewables energy
- 6. 6 Hydrogen storage
- 7. High hydrogen density (17.8wt%) Carbon-free chemical energy
Developed technology for synthesis (Haber-Bosch process) Catalytic
decomposition Solid ammine complexes Advantages 7 Life cycle of
hydrogen stored as ammonia Dehydrogenation It is necessary to
develop the catalyst for ammonia dehydrogenation A. Zttel et al.,
Soc, A 368 (2010) 3329-3342
- 8. Literature Precedents: Controlling Factors 8 (1) Influence
of Metals: Ru Ru > Rh > Ni > Pd Pt > Fe Rh Ni Pd, Pt
S.F. Yin et al., Appl. Catal. A 277 (2004) 1-9 S.F. Yin et al.,
Appl. Catal. 244 (2004) 384-396
- 9. Literature Precedents: Controlling Factors 9 (2) Influence
of Supports: Ru CNTs MgO TiO2, AC ZrO2 Al2O3 ZrO2 S.F. Yin et al.,
Appl. Catal. 244 (2004) 384-396
- 10. Literature Precedents: Controlling Factors 10 (3) Influence
of Promoters: Ru/CNTs S.F. Yin et al., Appl. Catal. A 277 (2004)
1-9
- 11. Motivation 11 Metal : Ru highly activity for ammonia
decomposition Support : Al2O3 less-expensive Promoter : La Sustain
high metal dispersity using thermally stable supports Ru supported
on La doped Al2O3 Al2O3 surface LaAlO3LaAlO3 Ru particles
- 12. 2 Experimental Preparation Catalyst Catalyst
characterization
- 13. 13 Preparation Catalyst Al2O3 La Impregnation La(x)-Al2O3
(x= 0, 1, 5, 10, 30) La(x)-Al2O3 Ru Impregnation
Ru(1wt%)/La(x)-Al2O3
- 14. Characterization 14 SEM images of La(x)-Al2O3 200nm
La(0)-Al2O3 La(1)-Al2O3 La(5)-Al2O3 La(10)-Al2O3 La(30)-Al2O3
- 15. Characterization XRD analysis of La(x)-Al2O3 15 20 30 40 50
60 70 80 ArbitaryIntensity(a.u) (deg) La(0)-Al2O3 La(1)-Al2O3
La(5)-Al2O3 La(10)-Al2O3 La(30)-Al2O3 LaAlO3 (012) # (110) # (202)
# (024) # (122) # (300) # (220) # (312) # ** * * * * * *=La2O3
- 16. Characterization Ru particle size : 1~3 nm STEM images of
Ru(1wt%)/La(x)-Al2O3 16 10nm 10nm 10nm 10nm Ru/La(0)-Al2O3
Ru/La(1)-Al2O3 Ru/La(5)-Al2O3 Ru/La(10)-Al2O3 10nm
Ru/La(30)-Al2O3
- 17. 20 30 40 50 60 70 80 ArbitaryIntensity(a.u) (deg)
Ru(1wt%)/La(0)-Al2O3 Ru(1wt%)/La(1)-Al2O3 Ru(1wt%)/La(5)-Al2O3
Ru(1wt%)/La(10)-Al2O3 Ru(1wt%)/La(30)-Al2O3 LaAlO3 (012) # (110) #
(202) # (024) # (122) # (300) # (220) # (312) # Ru * Ru *
Characterization Ru particle is very small and well distributed on
the support XRD analysis of Ru(1wt%)/La(x)-Al2O3 17
- 18. 3Results and Discussions Catalytic dehydrogenation of
ammonia over the Ru(1wt%)/La(x)/Al2O3 Structured catalysts for
industrial application
- 19. Ammonia cracker Reaction conditions Catalyst : 100mg
Reduction : 10% H2/N2, 2h NH3 concentration :10% Flow rate :
50ml/min, GHSVNH3 : 3,000ml/(h gcat) Temp. : 400 - 800 Experimental
19 2NH3 3H2 + N2 H = 46kJ/mol Catalytic test
- 20. Ammonia cracker 2NH3 3H2 + N2 H = 46kJ/mol Catalytic
activity 10mol%>5mol%>30mol%>1mol%>0mol% Results &
Discussions 20 400 500 600 700 800 0 20 40 60 80 100 Conversion(%)
Temp.()
- 21. 290 285 280 Intensity(a.u) Binding energy (eV)
Ru(1wt%)/La(0)-Al2O3 Ru(1wt%)/La(1)-Al2O3 Ru(1wt%)/La(5)-Al2O3
Ru(1wt%)/La(10)-Al2O3 Ru(1wt%)/La(30)-Al2O3 XPS Ru 3d profiles for
Ru(1wt%)/La(x)-Al2O3 21 Results & Discussions RuO2 RuOx
- 22. 0 100 200 300 400 500 600 700 ArbitaryIntensity(a.u) Temp.
() Ru(1wt%)/La(0)-Al2O3 Ru(1wt%)/La(1)-Al2O3 Ru(1wt%)/La(5)-Al2O3
Ru(1wt%)/La(10)-Al2O3 Ru(1wt%)/La(30)-Al2O3 Reduction ability of
Ru(1wt%)/La(x)-Al2O3 22 Results & Discussions RuO2 RuOx
- 23. Sample Surface area ( m2 /g ) Pore volume ( cm3 /g ) Pore
diameter ( ) La(0)-Al2O3 135.4 0.637 182.4 La(1)-Al2O3 136.9 0.655
159.9 La(5)-Al2O3 143.2 0.555 154.9 La(10)-Al2O3 102.5 0.414 161.6
La(30)-Al2O3 33.1 0.205 248.5 The textural properties of
La(x)-Al2O3 23 Results & Discussions 20 30 40 50 60 70 80
ArbitaryIntensity(a.u) (deg) La(0)-Al2O3 La(1)-Al2O3 La(5)-Al2O3
La(10)-Al2O3 La(30)-Al2O3 LaAlO3 (012) # (110) # (202) # (024) #
(122) # (300) # (220) # (312) # ** * * * * *
- 24. 24 Results & Discussions 100nm Ru/La(0)-Al2O3
Ru/La(1)-Al2O3 Ru/La(5)-Al2O3 Ru/La(10)-Al2O3 Ru/La(30)-Al2O3
100nm50nm Catalytic activity
10mol%>5mol%>30mol%>1mol%>0mol%
- 25. 25 Reaction conditions catalyst : 1 g, Reduction : 50%
H2/N2, 3h, NH3 concentration :100%, Temp. : 500 - 800 Catalytic
test Experimental Ru(1wt%)/La(10)-Al2O3
- 26. 500 550 600 650 700 750 800 0 20 40 60 80 100 Conversion(%)
Temp. () 500 550 600 650 700 750 800 0 500 1000 1500 2000 NH3 (ppm)
Temp. () 26 Results & Discussions Reaction conditions Reduction
: 50% 3h, NH3 concentration: 100%, Temp. : 500 - 800 Ammonia
cracker 2NH3 3H2 + N2 H = 46kJ/mol 4500 ml/h gcat 6000 ml/h
gcat
- 27. 27 3000 3500 4000 4500 5000 5500 6000 1000 1200 1400 1600
1800 2000 2200 NH3 (ppm) GHSV (ml/h gcat ) Results &
Discussions Ammonia cracker Reaction conditions Reduction : 50% 3h,
NH3 concentration: 100%, Temp. : 500 2NH3 3H2 + N2 H = 46kJ/mol
3000 3500 4000 4500 5000 5500 6000 0 20 40 60 80 100 Conversion(%)
GHSV (ml/h gcat )
- 28. 4Conclusions
- 29. Conclusions - Ru(1 wt%)/La(x)-Al2O3 (x=0, 1, 5, 10, and 30
mol%) were prepared for the dehydrogenation from ammonia. - Among
the as-prepared catalysts, the Ru/La(10)- Al2O3 material proved to
be superior. - The La addition with optimized quantities appears to
be critical for enhancing the catalytic activity. - The enhanced
activity of the catalyst was proposed to originate from the SMSI
between RuOx and La(10)- Al2O3, which further resulted in improved
catalyst stability. - The as-applied doping strategy would offer
valuable insight into the development of highly efficient,
transition-metal-based catalysts for ammonia dehydrogenation.
29
- 30. Thank you for your attention
- 31. Experiment 31 Preparation catalyst Al2O3 with (La 1, 5, 10,
30 mol% doped Al2O3) Precursor Lanthanum nitrate Solvent Distilled
H2O Impregnation -Al2O3 Dry At 100 oC for 12hr Stirring At 80 oC
for 3hr Calcination At 900 oC for 5hr Ru (1wt%)/La(x)-Al2O3 (x=0,
1, 5, 10, and 30 mol%) Precursor Ruthenium chloride Solvent
Distilled H2O Impregnation La(x)-Al2O3 Dry At 100 oC for 12hr
Rotary evaporation At 80 oC for 3hr Calcination At 800 oC for 5hr
H2 : N2 = 1:1 Mixing Mixing