Post on 06-Apr-2018
8/3/2019 403 - Subea Riser Bases
http://slidepdf.com/reader/full/403-subea-riser-bases 1/2
Copyright © 08/2008 AME Pty Ltd AME Engineering Excellence
Montara Subsea Umbilical Riser Bases
Coogee Resources
U m b i l i c a l R i s e
r B a s e s
3D model of subsea
umbilical riser bases.
Coogee Resources engaged AME to design
two subsea umbilical riser bases for their
Montara field develpment project.
AME worked closely with Independant
Offshore Solutions, to ensure the design met
their required installation and operation criteria.
The project presented a unique challenge inthat the design could only utiilise one specific
pre-determined steel member size for all of the
primary steelwork, as this was the only member
available to the overseas fabricator at the time.
By incorporating a combination of permanent
and removable external ballast weights, all
requirements including those of the fabrication
restrictions were met successfully.
AME‘s scope of work also included the design
and manufacture of the umbilical split clampsand associed riser base interface structures.
PROJECT PROFILE
Client:
Scope:
Project Duration:
Date:
Coogee Resources
Design (conceptual
and detailed), and
fabrication
12 weeks
Mar 2008 - Jun 2008
8/3/2019 403 - Subea Riser Bases
http://slidepdf.com/reader/full/403-subea-riser-bases 2/2
AME Pty Ltd
Photos (a-b):
Photos (c-e):
(b)(a)
(d) (e) (f)
(h)
(e)
AME Pty Ltd
Telephone: +61 8 9424 4100
Fax: +61 8 9424 4101Email: info@amepl.com.au
Web: www.amepl.com.au
P h o t o g r a p
h s
Copyright © 08/2008 AME Pty Ltd AME Engineering Excellence
Output from Finite Element Analysis(FEA) performed on the split clampand subsea base interface structure.FEA was utilised to ensure the designmet strength and fatigue requirments.
Umbilical split clamp and subsea baseinterface structure undergoing trial
fitup.
(c) (d)