Post on 06-Dec-2018
IMPEX TECNICHE LINEARI SRLVia Jacopone da Todi,14
IT-06089 Torgiano PG
T.: +39 075 98 80 100
F.: +39 075 98 80 103
info@movitec.it
www.movitec.it
by IMPEX TECNICHE LINEARI
Manufacturing moving solutions
+25 yearsLinear Systems
- Linear Tables electromechanics and pneumatic
- “Piccola” Linear Tables
- “Bi-Rail” Linear Modules
- Linear Units
IMPEX Tecniche Lineari SRL
The content of this publication is protected by
copyright held by the publisher and may not be
reproduced (even in part) unless permission is
granted. Every care has been taken to ensure the
accuracy of the information contained herein but no
liability shall be accepted for any loss or damage
whether direct, indirect or consequential resulting from
or in connection with the use of the information
contained herein. This catalogue supersedes previous
catalogues in which the data deviate from those
contained herein. Data subject to change as required
by technological developments.
LinearsystemeAlle Angaben ohne Gewähr! Änderungen in Technik und Design sind vorbehalten! Dr. TRETTER GmbH + Co., © Copyright 2016 Stand: 01/2016
MOVITEC - Linearsysteme - entwickelt und hergestellt von Impex Tecniche
Lineari s.r.l. seit über 25 Jahren - sind nach dem Baukastenprinzip konzipier-
te, lexibel entsetz- und kombinierbare Lineareinheiten.
MOVITEC steht für mehrere Produktfamilien: Lineareinheiten, Lineartische
Piccola, Lineartische elektromechanisch, Lineartische pneumatisch, Linearmodu-
le Bi-Rail.
Je nach Lasten und Arbeitszyklen steht eine große Auswahl an Antriebs–und
Führungssystemen, Werkstofe, Abdeckungen und Optionen zur Verfügung.
Diese machen MOVITEC Lineareinheiten zu lexibel einsetzbaren Komponenten
für massgeschneiderte Lösungen.
Die Welt der Lineartechnik
Bereiche:
Automobilindustrie
Werkzeugmaschinen
Bearbeitungsmaschinen
Fabrikautomation
Assembling
Handling
Industrieroboter
Verpackungsanlagen
Bildbearbeitungssysteme
Montageanlagen
Präzisionsmontage
Mikromechanik
Markiersysteme
Lasertechnik
Halbleiterindustrie
Medizinindustrie
Palettiermaschinen
Sondermaschinenbau
Depuis plus de 25 ans, lexibilité et modularité sont les caractéristiques
principales des produits MOVITEC, réalisés et fabriqués par Impex Tecniche
Lineari s.r.l.
La marque MOVITEC couvre plusieurs familles de produits: Unités Linéaires,
Tables Linéaires Piccola, Tables Linéaires électromécaniques, Tables Linéaires
pneumatiques et Modules Linéaires Bi-Rail.
En fonction de la cinématique et des charges, un vaste choix
d’entraînements, de systèmes de guidage, de matériaux, de protections et
d’options est disponible. Grâce a cette lexibilité, il est possible d’ofrir
rapidement des solutions personnalisées.
Le Monde de la Technique Linéaire
Secteurs industriels:
Industrie automobile
Machines-outils
Industrie de transformation
Automation
Assemblage de précision
Manipulation
Robots industriels
Emballages
Montage de précision
Découpage laser / á l'eau
Micromécanique
Systèmes de marquage
Laser
Semi-conducteurs
Médical
Palettiser
Machines spéciales
Da oltre 25 anni, lessibilità e modularità sono le caratteristiche principali dei
prodotti MOVITEC, progettati e costruiti da Impex Tecniche Lineari s.r.l.
Il marchio MOVITEC riassume diverse famiglie di prodotti che però sono tutti
combinabili tra di loro: Carropattino, Tavole Lineari Piccola, Tavole Lineari
elettromeccaniche, Tavole Lineari pneumatiche, Moduli Lineari Bi-Rail.
In base ai carichi ed ai cicli di lavoro, un’ampia scelta di trasmissioni,
scorrimenti, materiali di base, protezioni ed opzioni permettono di trovare la
giusta soluzione su misura per ogni tipo di applicazione.
Il Mondo della Tecnica Lineare
Settori principali:
Automobilistico
Macchine utensili
Macchine per lavorazioni
Automazione industriale
Assemblaggio
Manipolazione
Robot industriali
Imballaggio
Sistema di visione
Montaggi di precisione
Micromeccanica
Sistemi di marcatura
Lavorazioni laser
Semiconduttori
Medicale
Robot cartesiani
Paletizzazione
Macchine speciali
For over 25 years, MOVITEC products are designed and manufactured in Italy
by Impex Tecniche Lineari s.r.l.
Diferent product families are manufactured under brand name MOVITEC: Linear
Units, Piccola Linear Tables, electromechanical Linear Tables, pneumatic Linear
Tables and Bi-Rail Linear Modules.
Based on load and production cycle, an ample selection of drives, guiding
systems, materials, protections and options, turn MOVITEC linear systems
into the most lexible components for customer-made solutions.
A World of Linear Motion
Application areas:
Automotive
Machine tooling
Industrial machines
Factory automation
Assembly lines
Handling
Industrial robots
Packaging lines
Visual control systems
Precision assembly
Micromechanics
Marking systems
Laser industry
Semiconductors
Medical
Cartesian robots
Palletize
Special machines
Handling
CarropattinoSerie: 40, 60, 86, 116
Materiale proilo in alluminio estruso anodizzato; proilo normale (tipo
CV/CH), proilo alto (tipo HV/HH/CC).
Trasmissione con vite a ricircolo di sfere, vite a passo lungo Speedy, vite a
ilettatura tonda Rondo, vite trapezia, cinghia o senza trasmissione.
Scorrimento con due guide laterali in acciaio inox temperato (58-62 HRc) e
uno o due carri a ricircolo di sfere di diverse lunghezze.
Sfere Ø 2,5 e 3,5mm a 4 punti di contatto a 45° per elevate velocità.
Protezione metallica, soietto, senza protezione.
Opzioni attacco motore, ine corsa, inserti e stafe di bloccaggio.
Linear UnitsSize: 40, 60, 86, 116
Material aluminium proile extruded and anodised, standard proile height
(type CV/CH) or high proile (type HV/HH/CC).
Drive with ball screws, high helix screw Speedy, round thread screw Rondo,
trapezoidal screw, toothed belt or without drive.
Guiding System with two hardened stainless steel linear guides (58-62 HRc)
with one or two ball recirculating carriages of diferent lengths.
Spheres Ø 2,5 and 3,5mm with 4 contact points at 45° for high speed.
Protection with metal cover, bellows cover or without protection.
Options motor mounting, limit switches, ixing systems.
LineareinheitenBaugrössen: 40, 60, 86, 116
Material Aluminiumproil liessgepresst und eloxiert; Standard Proilhöhe
(Typ CV/CH), hohes Proil (Typ HV/HH/CC).
Antriebssystem mit KGT gerollt, Steilgewindespindel Speedy, Rundgewindespindel
Rondo, Trapezspindel, Zahnriemen oder ohne Antrieb.
Führungssystem ins Aluminiumproil integrierte Inox-Stahlführungen (58-62
HRc) und ein oder zwei Kugelumlaufschlitten verschiedener Längen.
Kugel Ø 2,5 und 3,5mm, 4 Kontaktpunkte auf 45° für hohe Geschwindigkeiten
Abdeckung mit Metall, Faltenbalg oder ohne Abdeckung.
Optionen Motoranbau, Endschalter, Klemmelemente.
Unites LineairesSérie: 40, 60, 86, 116
Matériaux proil extrudé en aluminium anodisé, proil hauteur standard
(types CV/CH) ou proil haut (types HV/HH/CC).
Entraînement par vis à bille, vis à pas long Speedy, vis à iletage rond Rondo,
vis trapézoïdale, courroie crantée ou sans entraînement.
Systéme de guidage avec 2 rails de guidage en acier inox trempé (58-62 HRc)
intégrés dans le proil de base et un ou deux chariots à récirculations de billes
de diférentes longueurs. Le contact des billes se fait à 45° sur 4 points pour
grandes vitesses.
Protection métallique, avec sou�et où sans protection.
Options montage moteur, ins de course, systèmes de ixation.
32
High load capacity
Self-supporting
Custom tailored solutions
Compact
Innovative
Accuracy
Extreme high speed
y
Light weight
High precision
Modular construction
Compact
Modular construction
Micromechanic
Tavole Lineari LV
Serie: 50, 75, 100 Materiale alluminio anodizzato o acciaio.
Trasmissione con vite a ricircolo di sfere, vite a passo lungo Speedy, vite a
ilettatura tonda Rondo, vite trapezia.
Scorrimento con guide lineari e pattini a ricircolo di sfere, cursori a strisciamento,
cursori a rulli incrociati e cursori a sfere.
Protezione con soietto o metallica.
Opzioni attacco motore, ine corsa, stafe di bloccaggio, sistema di lettura
lineare.
Linear Tables LVSize: 50, 75, 100
Material aluminium anodised or steel.
Drive with ball screw rolled or grounded, high helix screw Speedy, round
thread screw Rondo, trapezoidal screw.
Guiding System with linear rail guides, slideways, cross roller guides or linear
ball bearings.
Protection with bellows or metal cover.
Options motor mounting, limit switches, ixing systems, measuring systems.
Lineartische LVBaugrössen: 50, 75, 100
Material Aluminium eloxiert oder aus Stahl.
Antriebssystem mit KGT gerollt oder geschlifen, Steilgewindespindel Speedy,
Rundgewindespindel Rondo, Trapezspindel.
Führungssystem mit Kugelführungen, Gleitführungen, Kreutzrollenührungen
oder Kugelgleitührungen.
Abdeckung mit Faltenbalg oder Metall.
Optionen Motoranbau, Endschalter, Klemmelemente, Meßsystem.
Tables Lineaires LVSérie: 50, 75, 100
Matériaux aluminium anodisé ou acier.
Entraînement par vis à billes, vis à pas long Speedy, vis à iletage rond Rondo,
vis trapézoïdale.
Systéme de guidage avec patins á billes, curseurs en matéraux antifrottement,
curseurs à rouleaux croisés et curseurs à billes.
Protection avec sou�et où métallique.
Options montage moteur, ins de course, systèmes de ixation, système de lecture
linéaire.
Flexible
Custom tailored solutionsLoad capacity
Small dimension
Special executionsInnovative
High precision
54
Modular construction
Custom tailored solutions
Industrialmachines
Tavole Lineari TVSerie: 100, 150, 200, 250, 300, 400
Materiale alluminio anodizzato o acciaio.
Trasmissione con vite a ricircolo di sfere, vite a rulli satelliti, vite a passo lungo
Speedy, vite a ilettatura tonda Rondo, vite trapezia.
Scorrimento con guide lineari e pattini a ricircolo di sfere di diversa
grandezza, con guide lineari maggiorate o guide a rulli incrociati.
Protezione con soietto, soietto e lamelle inox o metallica.
Opzioni attacco motore, ine corsa, inserti e stafe di bloccaggio, lubriicazione,
sistema di arresto di sicurezza, sistema di lettura lineare.
Linear Tables TVSize: 100, 150, 200, 250, 300, 400
Material aluminium anodised or steel.
Drive with ball screw rolled or grounded, Satellite roller screw, high helix
screw Speedy, round thread screw Rondo, trapezoidal screw.
Guiding System with linear rail guides of diferent types, heavy load linear
guides or linear roller guides.
Protection with bellows, bellows and steel slats or metal cover.
Options motor mounting, limit switches, ixing systems, safety stop system,
measuring system.
Lineartische TVBaugrössen: 100, 150, 200, 250, 300, 400
Material Aluminium eloxiert oder Stahl.
Antriebssystem mit KGT gerollt oder geschlifen, Satellitenrollengewindespindel,
Steilgewindespindel Speedy, Rundgewindespindel Rondo, Trapezspindel.
Führungssystem mit Kugelführungen verschiedener Grösse, Hochlast-
Kugelführungen oder Rollenführungen.
Abdeckung mit Faltenbalg, Faltenbalg mit Stahllamellen oder Metall.
Optionen Motoranbau, Endschalter, Klemmelemente, Sicherheitssystem, Meßsystem.
Tables Lineaires TVSérie: 100, 150, 200, 250, 300, 400
Matériaux aluminium anodisé ou acier.
Entraînement par vis à bille, vis à rouleaux satellites, vis à pas long Speedy,
vis à iletage rond Rondo, vis trapézoïdale.
Systéme de guidage avec patins á billes de grandeur diférente, patins de
taille supérieure ou patins à rouleaux croisé.
Protection avec sou�et, sou�et et lamelles en acier inox où métallique.
Options montage moteur, ins de course, systèmes de ixation, système de sécurité,
système de lecture linéaire.
High load capacity
Dynamic
Flexible
ModHeavy workHigh precisionHigh precision
Special solutions
76
Modular construction
Custom tailored solutions
High load capacity
Dynamic
Flexible
ModHeavy workHigh precisionHigh precision
Special solutions
Automotive
Tavole Lineari TPSerie: 150, 200, 250, 300, 400
Materiale alluminio anodizzato o acciaio.
Trasmissione con cilindro pneumatico o idraulico.
Scorrimento con guide lineari e pattini a ricircolo di sfere di diversa
grandezza, con guide lineari maggiorate o guide a rulli incrociati.
Protezione con soietto o soietto con lamelle inox.
Opzioni attacco motore, ine corsa, inserti e stafe di bloccaggio, lubriicazione,
sistema di arresto di sicurezza, sistema di lettura lineare.
Linear Tables TPSize: 150, 200, 250, 300, 400
Material aluminium anodised or steel.
Drive with pneumatic or hydraulic cylinder.
Guiding System with linear rail guides of diferent types, heavy load linear
guides or linear roller guides.
Protection with bellows or bellows and steel slats.
Options motor mounting, limit switches, ixing systems, safety stop system,
measuring system.
Lineartische TPBaugrössen: 150, 200, 250, 300, 400
Material Aluminium eloxiert oder Stahl.
Antriebssystem mit pneumatischem oder hydraulischem Zylinder.
Führungssystem mit Kugelführungen verschiedener Grösse, Hochlast-
Kugelführungen oder Rollenführungen.
Abdeckung mit Faltenbalg oder Faltenbalg mit Stahllamellen.
Optionen Motoranbau, Endschalter, Klemmelemente, Sicherheitssystem,
Meßsystem.
Tables Lineaires TPSérie: 150, 200, 250, 300, 400
Matériaux aluminium anodisé ou acier.
Entraînement par vérin pneumatique ou hydraulique.
Systéme de guidage avec patins á billes de grandeur diférente, patins de
taille supérieure ou patins à rouleaux croisé.
Protection avec sou�et ou sou�et et lamelles en acier inox.
Options montage moteur, ins de course, systèmes de ixation, système de
sécurité, système de lecture linéaire.
98
Custom tailored
Heavy work
Self-supporting
DynamicHigh precisionHigh speed
High load capacity
Modular construction
Robotics
Moduli Lineari BI-RAILSerie: 70, 90, 130, 160
Materiale proilo in alluminio estruso anodizzato.
Trasmissione con vite a ricircolo di sfere, vite a passo lungo Speedy, vite trapezia
o a cinghia.
Scorrimento con 2 guide lineari e 4 pattini a ricircolo di sfere di diversa
grandezza o guide lineari maggiorate integrate lateralmente nel proilo.
Protezione con soietto o bandella metallica.
Opzioni attacco motore, ine corsa, inserti e stafe di bloccaggio, lubriicazio-
ne, sistema di arresto di sicurezza, sistema di lettura lineare.
BI-RAIL Linear ModulesSize: 70, 90, 130, 160
Material aluminium proile extruded and anodised.
Drive with ball screw rolled or grounded, high helix screw Speedy, trapezoi-
dal screw or belt drive.
Guiding System with 2 linear rail guides with 4 slide units of diferent sizes or
heavy load linear guides, mounted laterally inside the proile.
Protection with bellows or steel strapping.
Options motor mounting, limit switches, ixing systems, safety stop system,
measuring system.
BI-RAIL LinearmoduleBaugrössen: 70, 90, 130, 160
Material Aluminiumproil liessgepresst und eloxiert.
Antriebssystem mit KGT gerollt oder geschlifen, Steilgewindespindel Speedy,
Trapezspindel oder Zahnriemen.
Führungssystem mit 2 Linearführungen und 4 Kugelumlaufschlitten
verschiedener Grössen oder Hochlast-Kugelführungen, seitlich im Proil
befestigt.
Abdeckung mit Faltenbalg oder Stahl-Abdeckband.
Optionen Motoranbau, Endschalter, Klemmelemente, Sicherheitssystem, Meßsystem.
Modules Lineaires BI-RAILSérie: 70, 90, 130, 160
Matériaux proil extrudé en aluminium anodisé.
Entraînement par vis à bille, vis à pas long Speedy, vis trapézoïdale ou avec
courroie crantée.
Systéme de guidage avec 2 guidages et 4 patins à billes de grandeur
diférente ou de taille supérieure, ixé lateralment dans le proil.
Protection avec sou�et ou bande métallique.
Options montage moteur, ins de course, systèmes de ixation, système de
sécurité, système de lecture linéaire.
1110
The lexibility of the products combined with a wide selection of drives,
guiding systems and options allows for easy integration into new or existing
machines.
MOVITEC Linear Systems are ideal components for customer speciic
solutions. Thanks to their modular construction, application oriented linear
systems can be implemented. Linear sections with special lengths, long or
double carriages, special drives or motor mount can be produced in the
shortest time
Special executions
Grace au vaste choix possible de l’entraînement, des guidages, des
protections, des asservissements et toute une série d’options possibles, les
produits MOVITEC sont facilement intégrables dans une machine existante
comme dans une de nouvelle conception.
Les Systémes Linéaires MOVITEC permettent d’ofrir des solutions personna-
lisées en peu de temps et à un cout compétitif, comme des courses
spéciales, des chariots longs ou doubles, des entraînement et des adapta-
tions moteur particuliers.
Projets particuliers
L’adattabilità dei prodotti, forniti con un’ampia scelta di trasmissioni,
scorrimenti, protezioni, azionamenti ed opzioni, ne permettono una
integrazione facile sia in macchine di nuova progettazione che in quelle
esistenti.
I Sistemi Linari MOVITEC ofrono soluzioni personalizzate. Partendo dal
prodotto standard, è possibile creare una serie di personalizzazioni per i
clienti. Lunghezze speciali, carri lunghi o doppi, trasmissioni fuori standard,
adattatore per motore speciale, tutto si realizza in base alle esigenze
particolari del cliente.
Progetti speciali
Die Flexibilität der Produkte, gepaart mit einer umfassenden Auswahl an
Antrieben, Führungssystemen, Abdeckungen und Optionen, ermöglicht
eine einfache Integration in Neuentwicklungen oder bestehenden
Maschinen.
MOVITEC Lineareinheiten sind ideale Grundkomponente für Kundenspezii-
sche applikationsorientierte Lösungen zu äusserst wirtschaftlichen
Bedingungen. Sonderlängen, lange oder doppelte Schlitten, spezielle
Antriebe oder Motoradapter sind schnell realisierbar.
Spezialprojekte1312